Read full paper at:
http://www.scirp.org/journal/PaperInformation.aspx?PaperID=52960#.VK3oYMnQrzE
http://www.scirp.org/journal/PaperInformation.aspx?PaperID=52960#.VK3oYMnQrzE
Affiliation(s)
1Department of Advanced Fibro-Science, Kyoto Institute of Technology, Kyoto, Japan.
2Future Applied Conventional Technology Center, Kyoto Institute of Technology, Kyoto, Japan.
2Future Applied Conventional Technology Center, Kyoto Institute of Technology, Kyoto, Japan.
ABSTRACT
Maki-e
is a traditional Japanese decorative technique that uses the natural
lacquer Urushi and metal powders. In 2014, there exist only two
companies that manufacture silver powder for the purpose of Maki-e, and
this study focuses on comparing the powders manufactured by them. Gloss
and color of each silver powder were measured after Maki-e decoration
was finished, and EDS (energy-dispersive X-ray spectroscopy) was used to
determine the differences in their chemical composition. In addition,
to verify the effect of polishing, residual gloss after sulfuration and
polishing was measured. The study revealed that the shapes of the silver
powders (Maru-fun, No. 1) manufactured by the two companies are
different and it affects the occupancy rate of Urushi and powder, which
in turn affects their gloss and color. Wakou silver has a very strong
resistance to sulfuration; however, owing to its Pd content, its chroma
is much lower than that of other powders. It was shown that sulfuration
on powder surface can be removed by polishing irrespective of the shape
and chemical composition ratio of the particles.
Cite this paper
References
Narita, C. , Shimode, Y. and Yamada, K. (2015) Study on Properties of Silver Powder for Maki-e. Materials Sciences and Applications, 6, 1-8. doi: 10.4236/msa.2015.61001.
| [1] | Kopplin, M., Ed. (2002) Lacquerware in Asia, Today and Yesterday. United Nations Educational, 19-58. |
| [2] | Kyoto National Museum, Ed. (2008) Export Lacquer: Reflection of the West in Black and Gold Maki-e Exhibition. The Yomiuri Shimbun, Osaka. |
| [3] | Xiaa,
J., Xu, Y., Lina, J. and Hu, B. (2008) UV-Induced Polymerization of
Urushiol without Photoinitiator. Progress in Organic Coatings, 61, 7-10.
http://dx.doi.org/10.1016/j.porgcoat.2007.08.007 |
| [4] | Lee,
B.H. and Kim, H.J. (2004) Curing Behaviors of Korean Dendropanax
Lacquer Determined by Chemical and Physical Measures. Journal of Applied
Polymer Science, 92, 625-630. http://dx.doi.org/10.1002/app.20094 |
| [5] | Vogl,
O. (2000) Oriental Lacquer, Poison Ivy, and Drying Oils. Journal of
Polymer Science Part A: Polymer Chemistry, 38, 4327-4335. http://dx.doi.org/10.1002/1099-0518(20001215)38:24<4327::AID-POLA10>3.0.CO;2-3 |
| [6] | Nairta,
C., Endo, A., Shimode, Y. and Yamada, K. (2014) Study on the Appearance
Characteristics and Peel Strength of Byakudannuri. Materials Sciences
and Applications, 5, 81-85. http://dx.doi.org/10.4236/msa.2014.52012 |
| [7] | Canepa, T. (2009) Namban Lacquer for the Portuguese and Spanish Missionaries. Bulletin of Portuguese-Japanese Studies, 18-19, 253-290. |
| [8] | Bincsik,
M. (2008) European Collectors and Japanese Merchants of Lacquer in “Old
Japan”. Journal of the History of Collection, 20, 217-236. http://dx.doi.org/10.4236/msa.2014.52012 |
| [9] | Covaci, I.A. (2007) Japanese Lacquer in the Yale University Art Gallery Collection: “Nobleman’s Meal Table” and “Kōdaiji Maki-e Trousseau Box”. Yale University Art Gallery Bulletin, 133-137. |
| [10] | Webb,
M. (1998) Methods and Materials for Filling Losses on Lacquer Objects.
Journal of the American Institute for Conservation, 37, 117-133. http://dx.doi.org/10.1179/019713698806082930 |
| [11] | Uchida, T. (2012) Korin Maki-e No Kenkyu. Chuokouronbijyutsu, Tokyo. (In Japanese) |
| [12] | Murose, T. (2009) A Study on Yatsuhashi Maki-e Ink Stone Box: National Treasure. Journal of Cultural Properties, 7, 33-38. |
| [13] | Nakasato, T. (1972) Study of Metal Particles Used in Ancient Lacquer Arts. Science for Conservation, 9, 63-98. |
| [14] | Gakkai, S., Ed. (2012) Shitsugeijiten. Kadokawa Co., Ltd., Tokyo. |
| [15] | Kato, H., Sano, C., Saito, T. and Uchibori, G. (2004) Coloring Finish of Metal Surface Following Some Traditional Methods—Coloring of Silver and Its Effect. Science for Conservation, 43, 1-8. |
| [16] | Kamiya, Y. and Nishimura, S. (2013) Basic Study on Issue of Change of Color of the Black Lacquer Film—Surface Change Due to the Ultraviolet Irradiation of the Reacted Black Lacquer with Iron. Bulletin of TIRI, 8, 88-91. |
| [17] | Shimode,
Y., Nairta, C., Endo, A. and Yamada, K. (2013) Effect of Different
Eggshell Powder on Appearance of Eggshell Maki-e. Materials Sciences and
Applications, 4, 138-144. http://dx.doi.org/10.4236/msa.2013.42016 |
| [18] | Umeda, H., Sasaki, A., Takahashi, K., Haga, K., Takasaki, Y., Kuzuno, E. and Shibayama, A. (2011) Flotation and Process Design for Precious Metals Recovery from Powdery Waste Generated by Polishing Process of Dental Alloy. Journal of MMIJ, 127, 649-655. eww150108lx |
评论
发表评论