Read full paper at:
http://www.scirp.org/journal/PaperInformation.aspx?PaperID=52849#.VKs7qsnQrzE
http://www.scirp.org/journal/PaperInformation.aspx?PaperID=52849#.VKs7qsnQrzE
Author(s)
Linear source location of acoustic emission (AE)
technique has been applied in the present paper for finding the source
of material damage under fatigue loading. A plate type structure of
ductile cast iron has been used to undergo fatigue damage in a
servopulsing machine in the experiment. AE sensors were attached to the
specimen for getting the time delay of AE signal propagations through
the specimen. After receiving the time delay data of AE signals due to
the damage initiation in the material for the provided fatigue loads,
linear source location algorithm has been applied and the crack
positions are identified. Before applying the technique, a series of
pencil lead breaks (PLBs) tests have been conducted upon a ductile cast
iron plate of same dimension for verifying the applied algorithm.
According to the PLBs varification, the failure location of ductile cast
iron (pearlite type) due to the fatigue loading has been characterized.
In both experiments, the active ability of the proposed technique for
source location of structural damage has been identified clearly and
successfully.
Cite this paper
Khan, M. , Sunichi, N. and Hasan, M. (2014)
Structural Damage Localization by Linear Technique of Acoustic Emission.
Open Journal of Fluid Dynamics, 4, 425-432. doi: 10.4236/ojfd.2014.45032.
| [1] | Abe, S. (2006) Acoustic Emission Testing. Nondestructive Testing Series I, Japan Society for Non-Destructive Inspection, 4-22. (In Japanese) |
| [2] |
Dawson, B. (1976) Vibration
Condition Monitoring Techniques for Rotating Machinery. The Shock and
Vibration Digest (London), 8, 3. http://dx.doi.org/10.1177/058310247600801203 |
| [3] | Wilcox, P.D., Lee, C.K., Scholey, J.J., Friswell, M.I., Wisnom, M.R. and Drinkwater, B.W. (2006) Quantitative Structural Health Monitoring Using Acoustic Emission. SPIE, 6173, 1-10. |
| [4] | Meyendorf, N., Frankenstein, B. and Schubert, L. (2012) Structural Health Monitoring for Aircraft, Ground Transportation Vehicles, Wind Turbines and Pipes-Prognosis. 18th World Conference on Nondestructive Testing, Durban, 16- 20 April 2012. |
| [5] | Finlayson, R.D., Friesel, M., Carlos, Cole, P. and Lenain, J.C. (2001) Health Monitoring of Aerospace Structures with Acoustic Emission and Acousto-Ultrasonics. Insight, 43, 1-4. |
| [6] | Beghi, M.G. (2013) Modeling and Measurement for Acoustic Wave and for Acoustic Microdevices. In Tech. |
| [7] |
Theobald, P. and Dar, F. (2006)
AE Sensor Calibration for Out-of-Plane and In-Plane Displacement
Sensitivity. Journal of Advanced Material Research, 13, 91-98. http://dx.doi.org/10.4028/www.scientific.net/AMR.13-14.91 |
| [8] |
Yoshioka, T. and Fujiwara, T.
(1982) A New Acoustic Emission Source Locating System for the Study of
Rolling Contact Fatigue. Wear, 81, 183-186. http://dx.doi.org/10.1016/0043-1648(82)90314-3 |
| [9] |
Baxter, M.G., Pullin, R.,
Holford, K.M. and Evans, S.L. (2007) Delta T Source Location for
Acoustic Emission. Mechanical Systems and Signal Processing, 2007,
1512-1520. http://dx.doi.org/10.1016/j.ymssp.2006.05.003 |
| [10] | Jonathan, J.S., Paul, D.W. and Michael, R.W. (2008) Two-Dimensional Source Location Techniques for Large Composite Plates. Proceedings, EWGAE 2008, 160-165. eww150105lx |
评论
发表评论