Read full paper at:
http://www.scirp.org/journal/PaperInformation.aspx?PaperID=52430#.VJi6ucCAM4
http://www.scirp.org/journal/PaperInformation.aspx?PaperID=52430#.VJi6ucCAM4
Author(s)
Nowadays, thin-walled super-diameter pipes are produced by the method of
plastic bending of sheets. After a sheet is bent into a pipe and its ends are
welded, a pipe billet is subjected to expansion deformation. The technology of
forming end areas of a sheet is developed and formulaes forming forces
equations are deduced. Experimental investigations of deformation are undertaken.
Cite this paper
Brovman, T. (2014) Sheet Bending Deformation in Production of Thin-Walled Pipes. World Journal of Mechanics, 4, 363-370. doi: 10.4236/wjm.2014.412035.
[1] | Rymov, V.А., Polykhin, P.I. and Potapov, I.N. (1983) Improvement of Welded Pipe Production. Metallurgiya, Moscow, 307 p. |
[2] | Barabantsev, G.Ye., Tyulyapin, A.N., Kolobov, A.V. and Yusupov, V.S. (2005) Improvement of Electric-Welded Straight-Line-Seam Pipe Production Technology. Rolled Metal Production, 12, 21-23. |
[3] | Shinkin, V.N. (2013) Strength of Materials for Metallurgists. Textbook for Higher Schools, DomMISiS Publishing House, Moscow, 655 p. |
[4] | Hill, R. (1950) Mathematical Theory of Plasticity. Clarendon Press, Oxford, 407 p. |
[5] | Brovman, M.Ya. (1982) About Elastoplastic Bending of Beams in Movement. USSR Academy of Sciences, Mechanics of Solid Body, 3, 155-160.eww141223lx |
评论
发表评论