Read full paper at:
http://www.scirp.org/journal/PaperInformation.aspx?PaperID=51266#.VGGfIWfHRK0
http://www.scirp.org/journal/PaperInformation.aspx?PaperID=51266#.VGGfIWfHRK0
Author(s)
The conventional optimization methods were generally
based on a deterministic approach, since their purpose is to find out
an accurate solution. However, when the solution space is extremely
narrowed as a result of setting many inequality constraints, an
ingenious scheme based on experience may be needed. Similarly,
parameters must be adjusted with solution search algorithms when
nonlinearity of the problem is strong, because the risk of falling into
local solution is high. Thus, we here propose a new method in which the
optimization problem is replaced with stochastic process based on path
integral techniques used in quantum mechanics and an approximate value
of optimal solution is calculated as an expected value instead of
accurate value. It was checked through some optimization problems that
this method using stochastic process is effective. We call this new
optimization method “stochastic process optimization technique (SPOT)”.
It is expected that this method will enable efficient optimization by
avoiding the above difficulties. In this report, a new optimization
method based on a stochastic process is formulated, and several
calculation examples are shown to prove its effectiveness as a method to
obtain approximate solution for optimization problems.
Cite this paper
Yoshida, H. , Yamaguchi, K. and Ishikawa, Y. (2014) Stochastic Process Optimization Technique. Applied Mathematics, 5, 3079-3090. doi: 10.4236/am.2014.519293.
| [1] |
Kirkpatrick, S., Gelatt Jr.,
C.D. and Vecchi, M.P. (1983) Optimization by Simulated Annealing.
Science, 220, 671-680.
http://dx.doi.org/10.1126/science.220.4598.671 |
| [2] | Terasaki, M., Kondo, M., Yoshida, H., Yamaguchi, K. and Ishikawa, Y. (2004) Integrated Optimization of Airplane Design and Flight Trajectory by New Optimization Method Using a Stochastic Process. In: CONPUTATIONAL MECHANICS WCCM VI in Conjunction with APCOM’04, Tsinghua University Press & Springer-Verlag, Beijing, 328. |
| [3] | Yoshida, H., Konno, T., Yamaguchi, K. and Ishikawa, Y. (2005) New Optimization Method Using Stochastic Process Based on Path Integral. Journal of the Japan Society for Computational Methods in Engineering, 5, 145-150. (in Japanese) |
| [4] | Yoshida, H., Yamaguchi, K. and Ishikawa, Y. (2006) Application of a New Optimization Method for System Design. Joint 3rd International Conference on Soft Computing and Intelligent Systems (SCIS) and 7th International Symposium on Advanced Intelligent Systems (ISIS), Tokyo, 20-24 September 2006, 1542-1547. |
| [5] |
Yoshida, H., Yamaguchi, K. and
Ishikawa, Y. (2007) Design Tool Using a New Optimization Method Based on
a Stochastic Process. Transactions of the Japan Society for
Aeronautical and Space Sciences, 49, 220-230.
http://dx.doi.org/10.2322/tjsass.49.220 |
| [6] | Feynman, R.P. and Hibbs, A.R. (1965) Quantum Mechanics and Path Integrals. McGraw-Hill, New York. |
| [7] |
Metropolis, N., Rosenbluth,
A.W., Rosenbluth, M.N., Teller, A.H. and Teller, E. (1953) Equation of
State Calculations by Fast Computing Machines. Journal of Chemical
Physics, 21, 1087-1092. http://dx.doi.org/10.1063/1.1699114 |
| [8] |
Nakane, M., Kobayashi, D.,
Yoshida, H. and Ishikawa, Y. (2009) Feasibility Study on Single Stage to
Orbit Space Plane with RBCC Engine. 16th AIAA/DLR/DGLR International
Space Planes and hypersonic Systems and Technologies Conference, Bremen,
AIAA 2009-7331. http://dx.doi.org/10.2514/6.2009-7331 |
| [9] |
Ishimori, Y., Nakane, M.,
Ishikawa, Y., Yoshida, H. and Yamaguchi, K. (2011) Feasibility Study for
Spaceplane’s Concepts in Ascent Phase Using the Optimization Method.
Journal of the Japan Society for Aeronautical and Space Sciences, 59,
291-297. (in Japanese) http://dx.doi.org/10.2322/jjsass.59.291 |
| [10] |
Suzuki, S. and Kawamura, N.
(1996) Simultaneous Optimization of Sailplane Design and Its Flight
Trajectory. Journal of Aircraft, 33, 567-571. http://dx.doi.org/10.2514/3.46982 eww141111lx |
评论
发表评论