跳至主要内容

Effect of P Addition on the Thermal Stability of Nanocrystalline Ni-Co-Fe-P Coatings

Read full paper at:
http://www.scirp.org/journal/PaperInformation.aspx?PaperID=51249#.VGAco2fHRK0

Author(s)
The thermal stability of nanocrystalline Ni-Co-Fe-P coatings with phosphorus content up to 3.38 wt% prepared by pulsed electrodepostion was studied using XRD, TEM and DSC. It is found that multi-component alloying does improve the thermal stability of nanocrystalline coatings due to a “solution drag effect”. For nanocrystalline Ni-40.41%Co-6.16%Fe-1.63%P coating, P-atoms segregate the grain boundaries during annealing which leads to a higher thermal stability. While due to the higher initial P-concentration in Ni-30.1%Co-2.15%Fe-3.38%P, saturation of P and precipitation occurs earlier leading to a slightly lower stability.
Cite this paper
Dai, P. and Lin, L. (2014) Effect of P Addition on the Thermal Stability of Nanocrystalline Ni-Co-Fe-P Coatings. Advances in Materials Physics and Chemistry, 4, 217-223. doi: 10.4236/ampc.2014.411025.
 

[1] Su, F.H., Liu, C.S. and Huang, P. (2013) Friction and Wear of Nanocrystalline Co and Co-W Alloy Coatings Produced by Pulse Reverse Electrodeposition. Wear, 300, 114-125.
http://dx.doi.org/10.1016/j.wear.2013.01.120
[2] Hibbard, G., Erb, U., Aust, K.T., et al. (2002) Thermal Stability of Nanostrctured Coatings. Materials Science Forum, 386-388, 387-396.
http://dx.doi.org/10.4028/www.scientific.net/MSF.386-388.387
[3] Hibbard, G., Aust, K.T., Palumbo, G., et al. (2001) Thermal Stability of Electrodeposited Nanocrystalline Cobalt. Scripta Materialia, 44, 513-518.
http://dx.doi.org/10.1016/S1359-6462(00)00628-X
[4] Yu, H. and Dai, P.Q. (2004) Thermal Stability of Pulsed Electrodeposited Nanocrystalline Ni. Heat Treatment of Metals, 30, 16-18.
[5] Klement, U., Erb, U. and Elsherik, A.M. (1995) Thermal Stability of Nanocrystalline Ni. Materials Science and Engineering A, 203, 177-186.
http://dx.doi.org/10.1016/0921-5093(95)09864-X
[6] Malow, T.R. and Koch, C.C. (1996) Thermal Stability of Nanocrystalline Materials. Materials Science Forum, 225-227, 595-604.
http://dx.doi.org/10.4028/www.scientific.net/MSF.225-227.595
[7] Birringer, R. (1989) Nanocrystalline Materials. Materials Science and Engineering A, 117, 33-43.
http://dx.doi.org/10.1016/0921-5093(89)90083-X
[8] Liu, Y.C., Liu, L., Shen, B., et al. (2011) A Study of Thermal Stability in Electrodeposited Nanocrystalline Fe-Ni Invar Alloy. Materials Science and Engineering A, 528, 5701-5705.
http://dx.doi.org/10.1016/j.msea.2011.04.052
[9] Hibbard, G.D., Aust, K.T. and Erb, U. (2006) Thermal Stability of Electrodeposited Nanocrystalline Ni-Co Alloys. Materials Science and Engineering A, 433, 195-202.
http://dx.doi.org/10.1016/j.msea.2006.06.096
[10] Shigeaki, K. and Youhei, K. (2003) Grain Growth and Mechanical Properties of Electrodeposited Nanocrystalline Nickel-4.4Mass% Phosphorus Alloy. Materials Science and Engineering A, 358, 76-83.
http://dx.doi.org/10.1016/S0921-5093(03)00285-5
[11] Kissinger, H.E. (1957) Reaction Kinetics in Differential Thermal Analysis. Analytical Chemistry, 29, 1672-1706.
http://dx.doi.org/10.1021/ac60131a045
[12] Humphreys, F.J. and Hatherly, M. (1995) Recrystallization and Related Annealing Phenomena. Elsevier Science Ltd., Oxford.
[13] Lee, D.N. and Hur, K.H. (1999) The Evolution of Texture during Annealing of Electroless Ni-Co-P Coatings. Scripta Materialia, 40, 1333-1339.
http://dx.doi.org/10.1016/S1359-6462(99)00105-0
[14] Humphrey, F.J. and Hatherly, M. (1996) Recrystallization and Related Annealing Phenomena. Pergamon Press, Oxford.
[15] Mori, T., Koda, M., Monzen, R., et al. (1983) Particle Blocking in Grain Boundary Sliding and Associated Internal Friction. Acta Metallurgica, 31, 275-283.
http://dx.doi.org/10.1016/0001-6160(83)90104-9           eww141110lx

评论

此博客中的热门博文

Does Immigration Promote the Investment of the Monopolistic Firm?

In the present paper, we examine the effect of increasing uncertainty of immigrants’ growth on the optimal timing of investment of a firm that has a monopolistic power over the labor market. It is revealed that when the uncertainty of immigrants’ growth is more than a threshold level, increasing uncertainty of immigrants’ growth accelerates the optimal timing of firms’ investment and enhances the economic growth, even if the uncertainty of immigrants’ growth is formulated by the geometric Brownian motion, which is in sharp contrast to the standard result that an increase in the uncertainty postpones the optimal timing. With an increase in the immigrants over the past ten years, workforces in the host countries have been growing significantly to the extent that the immigrants represent 70% of the increase in the workforce in Europe, and 47% in the United States as OECD indicates. In the present paper, we attempted to investigate the effect of increased uncertainty caused by the growi...

Education Policy Implementation: A Mechanism for Enhancing Primary Education Development in Zanzibar

Education is one of the fundamental rights of individuals; therefore, the government of a country needs to develop and strengthen educational policy and quality as well as to ensure that everyone has equal access to basic education. The improvement of access and quality of education in the world is becoming as an essential factor in development, whereas the basic education (primary school), is acknowledged as a foundation of the higher educational development for every country. To fulfill this goal, governments introduce several policies and procedures; however, it requires some reforms and participation from the politician, policymakers, and other stakeholders to re-examine educational policy so that it can lead to multiplication and betterment of the reforms. Educational reforms actually focus on accountability. A positive educational development and reform is very challenging and needs more effort and strategy on how to use and utilize the resources effectively as such it can achie...