跳至主要内容

Surface Modification of Parts Material Shape Memory TiNiCo with a View to Providing a Functional and Mechanical Property as a Factor in Resource

Read full paper at:
http://www.scirp.org/journal/PaperInformation.aspx?PaperID=50390#.VDzA7VfHRK0

The paper presents a complex method of forming the surface-modified layers of materials with shape memory effect, including high-speed flame spraying of powders based on TiNiCo; subsequent thermal and thermomechanical treatment allows the formation of surface layers of nano-sized state that have a high level of functional, mechanical and performance properties; it is shown that the complex processing with a layer of TiNiCo allows a reduction of the porosity of the coatings and increases the strength of the coating’s adhesion to the substrate. It is found that, after treatment with high-speed flame spraying powder shape memory TiNiCo, steel has an increase in cycle life by 30% - 40% in a cycle fatigue and 3 - 3.5 times durability. Based on comprehensive research into the metallophysical surface-modified layer, new information is obtained about the nanoscale composition.
Cite this paper
Rusinov, P. and Blednova, Z. (2014) Surface Modification of Parts Material Shape Memory TiNiCo with a View to Providing a Functional and Mechanical Property as a Factor in Resource. Journal of Surface Engineered Materials and Advanced Technology, 4, 348-358. doi: 10.4236/jsemat.2014.46039. 
 

[1] Blednova, Zh.M. and Rusinov, P.O. (2010) Formation of Nanostructured Surface Layers by Plasma Spraying the Mechanoactivated Powders of Alloys with Shape Memory Effect. Nanotechnologies in Russia, 5, 352-363.
http://dx.doi.org/10.1134/S1995078010050101
[2] Blednova, Zh.M. and Rusinov, P.O. (2013) Formation of Nanostructured Surface Layers from Materials with Shape Memory Effect TiNiCu in Conditions. Materials Science Forum, 738-739, 512-517.
http://dx.doi.org/10.4028/www.scientific.net/MSF.738-739.512
[3] Blednova, Z.M., Rusinov, P.O. and Stepanenko, M.A. (2013) Superficial Modifying by SME Materials in Engineering Appendices. Materials Science Forum, 738-739, 595-600.
http://dx.doi.org/10.4028/www.scientific.net/MSF.738-739.595
[4] Blednova, Zh.M. and Rusinov, P.O. (2014) Mechanical and Tribological Properties of the Composition Steel-Nano-structured Surface Layer of a Material with Shape Memory Effect Based TiNiCu. Applied Mechanics and Materials, 592-594, 1325-1330.
http://dx.doi.org/10.4028/www.scientific.net/AMM.592-594.1325
[5] Blednova, Z.M., Rusinov, P.O. and Stepanenko, M.A. (2014) Influence of Superficial Modification of Steels by Materials with Effect of Memory of the Form on Wear-Fatigue Characteristics at Frictional-Cyclic Loading. Advanced Materials Research, 915-916, 509-514.
http://dx.doi.org/10.4028/www.scientific.net/AMR.915-916.509
[6] Lekston, Z. and Drugacz, J. (2007) Structure and Properties of NiTi and TiNiCo Shape Memory Wires for Maxillofacial Surgery. 12th International Scientific Conference Achievements in Mechanical and Materials Engineering, 593-596.
[7] Lekston, Z. and Lagiewka, E. (2007) X-Ray Diffraction Studies of NiTi Shape Memory Alloys. Archives of Materials Science and Engineering, 28, 665-672.
[8] Khachin, V.N. (1992) Titanium Nikelid. Structure and Properties. Nauka, Moscow.
[9] Tobushi, H., Kimura, K., Sawada, T., Hattori, T. and Lin, P. (1994) Recovery Stress Associated with R Phase Transformation in TiNi Shape Memory Alloy. JSME International Journal, Series A, 37, 138-142.
[10] Zel’dovich, V.I., Khomskaya, I.V., Frolova, N.Y., et al. (2001) On the Origin of R Martensite in Titanium Nickelide. FMM, 92, 71-76.
[11] Khalil-Allafi, J., Dlouhy, A. and Eggeler, G. (2002) Ni4Ti3-Precipitation during Aging of NiTi Shape Memory Alloys and Its Influence on Martensite Phase Transformation. Acta Materialia, 50, 4255-4274.
http://dx.doi.org/10.1016/S1359-6454(02)00257-4
[12] Karabasova, Y.S., Ed. (2002) New Materials. MISIS, 736s.       eww141014lx
标签：

评论

发表评论

此博客中的热门博文

Does Immigration Promote the Investment of the Monopolistic Firm?

In the present paper, we examine the effect of increasing uncertainty of immigrants’ growth on the optimal timing of investment of a firm that has a monopolistic power over the labor market. It is revealed that when the uncertainty of immigrants’ growth is more than a threshold level, increasing uncertainty of immigrants’ growth accelerates the optimal timing of firms’ investment and enhances the economic growth, even if the uncertainty of immigrants’ growth is formulated by the geometric Brownian motion, which is in sharp contrast to the standard result that an increase in the uncertainty postpones the optimal timing. With an increase in the immigrants over the past ten years, workforces in the host countries have been growing significantly to the extent that the immigrants represent 70% of the increase in the workforce in Europe, and 47% in the United States as OECD indicates. In the present paper, we attempted to investigate the effect of increased uncertainty caused by the growi...
发表评论
阅读全文

Education Policy Implementation: A Mechanism for Enhancing Primary Education Development in Zanzibar

Education is one of the fundamental rights of individuals; therefore, the government of a country needs to develop and strengthen educational policy and quality as well as to ensure that everyone has equal access to basic education. The improvement of access and quality of education in the world is becoming as an essential factor in development, whereas the basic education (primary school), is acknowledged as a foundation of the higher educational development for every country. To fulfill this goal, governments introduce several policies and procedures; however, it requires some reforms and participation from the politician, policymakers, and other stakeholders to re-examine educational policy so that it can lead to multiplication and betterment of the reforms. Educational reforms actually focus on accountability. A positive educational development and reform is very challenging and needs more effort and strategy on how to use and utilize the resources effectively as such it can achie...
发表评论
阅读全文