跳至主要内容

A De-Noising Method for Track State Detection Signal Based on the Statistical Characteristic of Noise

Read full paper at:
http://www.scirp.org/journal/PaperInformation.aspx?PaperID=50741#.VEm91VfHRK0

Based on the statistical characteristics analysis of random noise power and autocorrelation function, this paper proposes a de-noising method for track state detection signal by using Empirical Mode Decomposition (EMD). This method is used to noise reduction refactoring for the first Intrinsic Mode Function (IMF) component in accordance with the “random sort-accumulation-average-refactoring" order. Signal autocorrelation function characteristics are used to determine the cut-off point of the dominant mode. This method was applied to test signals and the actual inertial unit signals; the experimental results show that the method can effectively remove the noise and better meet the precision requirement.
Cite this paper
Li, L. , Chai, X. , Zheng, S. and Zhu, W. (2014) A De-Noising Method for Track State Detection Signal Based on the Statistical Characteristic of Noise. Journal of Transportation Technologies, 4, 327-336. doi: 10.4236/jtts.2014.44029
 

[1] Lu, Z.X., Su, Y.C. and Li, H. (2007) Super Track Long-Wave Irregularity Detection System Design. China Measurement &Testing Technology, 33, 16-18.
[2] Zheng, S.B., Lin, J.H. and Lin, G.B. (2007) Maglev Track Long-Wave Irregularity Detection Based on Inertia Method and Its Implementation. Journal of Electronic Measurement and Instrument, 21, 61-65.
[3] Chen, D.S. and Tian, X.Y. (2008) China’s High-Speed Rail Track Detection Technology Development. Railway Engineering, 12, 82-86.
[4] Weng, S.D. (1990) GJ-3 Track Detection System Development and Application. China Railway Science, 11, 54-64.
[5] Xu, G.Y., Cui, W. and Jiang, Y. (2000) GJ-4 Track Inspection Car and Its Effect on Transportation Safety. China Railway, 9, 51-52.
[6] Zhao, G., Liu, W.Z. and Chen, D.S. (2004) GJ-5 Track Inspection Car Independent Research and Development of the Software. Railway Engineering, 12, 45-46.
[7] Huang, N.E., Shen, Z., Long, S.R., et al. (1998) The Empirical Mode Decomposition and the Hilbert Spectrum for Nonlinear and Non-Stationary Time Series Analysis. Proceedings of the Royal Society, 454, 56-78.
[8] Boudraa, A.-O. and Cexus, J.-C. (2007) EMD-Based Signal Filtering. IEEE Transactions on Instrumentation and Measurement, 56, 2196-2202.
http://dx.doi.org/10.1109/TIM.2007.907967
[9] Du, H.T., Gao, L.K. and Fan, G.P. (1997) The Application of Digital Filtering Technology in Orbit. China Railway Science, 18, 79-90.
[10] Du, H.T. (2000) Long Wavelength Track Irregularity Detection Method of Digital Filter. China Railway Science, 21, 58-64.
[11] Zhu, W.F., Chai, X.D. and Zheng, S.B. (2012) Based on the Track Long-Wave Irregularity of Strapdown Inertial System Test. Urban Mass Transit, 11, 87-90.
[12] Yang, Y.J., Huang, D.M. and Zhang, T.S. (2001) A Suitable for Engineering Practical Strapdown Attitude Algorithm. Journal of Chinese Inertial Technology, 9, 12-15.
[13] Zhang, Y., Ma, R.G. and Ding, H. (2007) The Laser Pavement Roughness Detection System Based on Inertial Reference Study. Computer and Communications, 25, 13-15.
[14] Mo, W.Q., Jiang, D.S. and Hu, W.B. (2004) Engineering Structure Based on Optic Fiber Gyro Strapdown Three-Dimensional Deformation Measurement Method. Optics & Optoelectronic Technology, 2, 15-17.
[15] Huang, N.E.,Wu, M.L., Long, S.R., et al. (1998) The Empirical Mode Decomposition and the Hilbert Spectrum for Nonlinear and Non-Stationary Time Series Analysis. Proceedings of the Royal Society, 454, 903-995.
http://dx.doi.org/10.1098/rspa.1998.0193
[16] Jiang, L. and Li, C.Y. (2005) Based on Empirical Mode Decomposition of the Wavelet Threshold Denoising Method Research. Signal Processing, 6, 659-662.
[17] Zhao, W.W. and Zeng X.W. (2008) A New Method of EMD De-Noising. Electronic Science and Technology, 5, 30-32.
[18] Wu, N.H. and Huang, N.E. (2004) A Study of the Characteristics of White Noise Using the Empirical Mode Decomposition Method. Proceedings of the Royal Society A, 460, 1597-1611.
http://dx.doi.org/10.1098/rspa.2003.1221                 eww141024lx

评论

此博客中的热门博文

A Comparison of Methods Used to Determine the Oleic/Linoleic Acid Ratio in Cultivated Peanut (Arachis hypogaea L.)

Cultivated peanut ( Arachis hypogaea L.) is an important oil and food crop. It is also a cheap source of protein, a good source of essential vitamins and minerals, and a component of many food products. The fatty acid composition of peanuts has become increasingly important with the realization that oleic acid content significantly affects the development of rancidity. And oil content of peanuts significantly affects flavor and shelf-life. Early generation screening of breeding lines for high oleic acid content greatly increases the efficiency of developing new peanut varieties. The objective of this study was to compare the accuracy of methods used to classify individual peanut seed as high oleic or not high oleic. Three hundred and seventy-four (374) seeds, spanning twenty-three (23) genotypes varying in oil composition (i.e. high oleic (H) or normal/not high oleic (NH) inclusive of all four peanut market-types (runner, Spanish, Valencia and Virginia), were individually tested ...

Location Optimization of a Coal Power Plant to Balance Costs against Plant’s Emission Exposure

Fuel and its delivery cost comprise the biggest expense in coal power plant operations. Delivery of electricity from generation to consumers requires investment in power lines and transmission grids. Placing a coal power plant or multiple power plants near dense population centers can lower transmission costs. If a coalmine is nearby, transportation costs can also be reduced. However, emissions from coal plants play a key role in worsening health crises in many countries. And coal upon combustion produces CO 2 , SO 2 , NO x , CO, Metallic and Particle Matter (PM10 & PM2.5). The presence of these chemical compounds in the atmosphere in close vicinity to humans, livestock, and agriculture carries detrimental health consequences. The goal of the research was to develop a methodology to minimize the public’s exposure to harmful emissions from coal power plants while maintaining minimal operational costs related to electric distribution losses and coal logistics. The objective was...

Evaluation of the Safety and Efficacy of Continuous Use of a Home-Use High-Frequency Facial Treatment Appliance

At present, many home-use beauty devices are available in the market. In particular, many products developed for facial treatment use light, e.g., a flash lamp or a light-emitting diode (LED). In this study, the safety of 4 weeks’ continuous use of NEWA TM , a high-frequency facial treatment appliance, every alternate day at home was verified, and its efficacy was evaluated in Japanese individuals with healthy skin aged 30 years or older who complained of sagging of the facial skin.  Transepidermal water loss (TEWL), melanin levels, erythema levels, sebum secretion levels, skin color changes and wrinkle improvement in the facial skin were measured before the appliance began to be used (study baseline), at 2 and 4 weeks after it had begun to be used, and at 2 weeks after completion of the 4-week treatment period (6 weeks from the study baseline). In addition, data obtained by subjective evaluation by the subjects themselves on a visual analog scale (VAS) were also analyzed. Fur...