Read full paper at:
http://www.scirp.org/journal/PaperInformation.aspx?PaperID=20500#.VNHb-yzQrzE
http://www.scirp.org/journal/PaperInformation.aspx?PaperID=20500#.VNHb-yzQrzE
Affiliation(s)
DEPARTMENT OF MATERIALS SCIENCE AND ENGINEERING,OBAFEMI AWOLOWO UNIVERSITY, ILE-IFE, NIGERIA.
DEPARTMENT OF MATHEMATICS,UNIVERSITY OF JOS,JOS, NIGERIA.
DEPARTMENT OF MATHEMATICS,UNIVERSITY OF JOS,JOS, NIGERIA.
ABSTRACT
A
mathematical model and its associated numerical search algorithm has
been developed for routine coal blending to include local coals for
cokemaking at the Nigerian blast furnace-based Ajaokuta Steel Plant. A
typical binary blend proposed using the model includes 28.38% and 29.00%
of the ash- laden Lafia and non-caking Okaba coals, respectively. The
proposed blends satisfy basic chemical and mechanical strength
requirements at the lowest cost per ton of coal. The blending
calculations showed that only low ash, low sulphur, medium volatile and
high vitrinite reflectance prime grade coals such as the UK Ogmore
should be imported for blending with the ash-laden medium coking Lafia
coal. When the proposed blends are successfully confirmed with bench and
pilot scale carbonization tests, cokemaking at Ajaokuta will be
conducted with substantial savings in foreign exchange.
Cite this paper
References
A. ADELEKE and P. ONUMANYI, "Numerical Computations to Produce Cokeable Coal Blends at The Ajaokuta Steel Plant, Nigeria," Journal of Minerals and Materials Characterization and Engineering, Vol. 6 No. 2, 2007, pp. 121-134.
| [1] | Poos, A., 1992, “Future requirements for blast furnace coke quality”. Cokemaking International , vol. 4, 29-30. |
| [2] | Bujnowska, B., and Collin, G., 1992, “Coal tar pitch for improving coking properties of coal” , In Proc. 2nd International cokemaking congress, London, 1992, pp. 142-146. |
| [3] | Task Force on the maximum utilization of Nigerian coals at the Ajaokuta steel plant, 1987, Abuja, Nigeria. |
| [4] | Raw Materials and products specification for Federal Government steel companies,1994, 1st edn., Abuja, Nigeria. |
| [5] | Moitra A.K., Banerjee, N.G., Shrinkhande K.Y., Sing, K. Raja, K, and Banerjee, S., 1972 Studies on coal carbonisation in India, 1st edn, Central Fuel Research Institute Publication, Calculta. |
| [6] | www.englishpeople.com.cn |
| [7] | Adeleke A.O., 1997: Numerical Computations for coal blend optimization, M.Sc Mathematics Thesis, University of Jos, Nigeria. |
| [8] | Skerl, G.E., 1988, “Automatic coal blend optimisation for cokemaking”. Iron and steel Engineer, USA, July edn, pp. 39-43. |
| [9] | Ndaji, F.E., Marsh, H.A., 1987, “Laboratory Scale assessment of the utilization potential of sub-bituminous Nigerian coals as components of coking blends”, Fuel Processing Technology, Vol. 17, 131-143. |
| [10] | Price, J.T. and Grandsen, J.F., 1987, “Improving coke quality with Canadian coals”, In Proc. 1st International cokemaking congress, Essen, section E3, preprints vol. |
| [11] | Panaitescu, C., 1991, Petrographia Carbunilor cocsurilor si producelor Carbonice,1st edn., Editura Enciclopedia, Bucharest. |
| [12] | Peskett, A.P., 1999 coal Indaba 99, Extract from final proceedings. |
| [13] | Fatunla, S.O ,1993, Fundamentals of FORTRAN programming, 1st edn., ADA+JANE Press,Benin |
| [14] | Hudspeth, M.K., 1983, Introductory Geometry, 1st edn., Addison Wesley, London |
| [15] | Cross, M., and Moscardini, A.O., 1985, Learning the art of Mathematical modeling, 1st edn., Elis Horwood Ltd, Sussex. |
| [16] | Eckert, E.R.G. and Drake, R.M., 1972, Analysis of heat and mass transfer, international student edn., McGraw-Hill, London. |
| [17] | Curtis, F.G., 1977, Applied Numerical Analysis, 2nd edn., Addison-Wesley,Reading |
| [18] | Buchtele, J., Rozkosny, I and sebestova, E., 1992, “Effect of the organic matter structure on the coking properties and on the texture formation of model cokes”,In Proc. 2nd in international cokemaking congress, London, pp. 214 – 230. |
| [19] | Prasad, H.N., Rao P.V.T., Poddar, N.N. and Chaterjee, A., “Selection of coals for cokemaking by classical top charging and stamp charging”,In Proc. 2nd international cokemaking congress, London, 1992, pp. 231-235. |
| [20] | Katsuhiko, O., Akira, K., Mitsumas, H., Seiji, N. and Kan, A., 1987, “Evaluation of coking coal”, In Proc. 1st International cokemaking congress, Essen, 1987, section E7. |
| [21] | Weskamp, W., Rhode, W., Stewen, W., and Habermehl, T., 1987, “Greater coke strength through reactive additives to coking blends”,In Proc. 1st International cokemaking congress, Essen, section II. 1. |
| [22] | Echterhoff, J.,Killich, H.J. and Frick, H.,1992,”Production of blast furnace coke by stamp charging and utilization of recycled coke breeze”,In Proc. 2nd international cokemaking congress,London,pp172-186 |
| [23] | Xiaofeng, X., Akira, O., Tsunenori, N. and Shigeru, M.J., 1998, “Properties and structure of brown coal treated by hydrothermal process”, 8th Australian coal science conference, NSW, pp. 148. |
| [24] | Broken Hill Proprietary Company (BHP) Publication, 1998, Winning Illawarra Coal, 8th Australian Coal Conference, NSW. |
| [25] | Singh, B.N., Singh B.K., Venugopal, R., Mitra, A.N. and Mukherjee, T., 1987, “Stamp charging of Indian coals”, In Proc. 1 st International okemaking congress,Essen, section E6. eww150204lx |
评论
发表评论