Design and Implementation of Low-Pass, High-Pass and Band-Pass Finite Impulse Response (FIR) Filters Using FPGA
Read full paper at:
http://www.scirp.org/journal/PaperInformation.aspx?PaperID=54118#.VO2HqSzQrzE
http://www.scirp.org/journal/PaperInformation.aspx?PaperID=54118#.VO2HqSzQrzE
Author(s)
ABSTRACT
This
paper presents the design and implementation of a low-pass, high-pass
and a hand-pass Finite Impulse Response (FIR) Filter using SPARTAN-6
Field Programmable Gate Array (FPGA) device. The filter performance is
tested using Filter Design and Analysis (FDA) and FIR tools from
Mathworks. The FDA Tool is used to define the filter order and
coefficients, and the FIR tool is used for Simulink simulation. The FPGA
implementation is carried out using Spartan-6 LX75T-3FGG676C for
different filter specifications and simulated with the help of Xilinx
ISE (Integrated Software Environment). System Generator ISE design suit
14.6i is used in synthesizing and co-simulation for FPGA filter output
verification. Finally, comparison is done between the results obtained
from the software simulations and those from FPGA using hardware
co-simulation. The simulation waveforms and synthesis reports verify the
parallel implementation of FPGA which proves its effectiveness in terms
of speed, resource usage and power consumption.
KEYWORDS
Digital Filters, FIR Filter, Matlab Simulink, FDA Tool, FIR Tool, Distributed Arithmetic, FPGA, Xilinx System Generator
Cite this paper
References
Kolawole,
E. , Ali, W. , Cofie, P. , Fuller, J. , Tolliver, C. and Obiomon, P.
(2015) Design and Implementation of Low-Pass, High-Pass and Band-Pass
Finite Impulse Response (FIR) Filters Using FPGA. Circuits and Systems, 6, 30-48. doi: 10.4236/cs.2015.62004.
| [1] | Ruan, A.W., Liao, Y.B. and Li, J.X. (2009) An ALU-Based Universal Architecture for FIR Filters. IEEE Proceedings of International Conference on communications, Circuits and Systems, Milpitas, July 2009, 1070-1073. |
| [2] | Panayotatos, P. (2005) Frequency Response of Filters. Rutgers University, New Brunswick. |
| [3] | Quayyum, A. and Mazher, M. (2012) Design of Programmable, Efficient Finite Impulse Response Filter Based on Distributive Arithmetic Algorithm. International Journal of Information Technology and Electrical Engineering, 1, 19-24. |
| [4] | Monmasson, E., et al. (2011) FPGAs in Industrial Control Applications. IEEE Transactions on Industrial informatics, 7, 224-243. http://dx.doi.org/10.1109/TII.2011.2123908 |
| [5] | Wenjing, H., Guoyun, Z. and Waiyun, L. (2011) Self-Programmable Multipurpose Digital Filter Design Based on FPGA. IEEE Proceedings of International Conference on Internet Technology and Applications (iTAP), Wuhan, August 2011, 1-5. |
| [6] | Mohanakrishnan, S. and joseph, B.E. (1995) Automatic Implementation of FIR Filters on Field Programmable Gate Arrays. IEEE Signal Processing Letters, 2, 51-53. |
| [7] | Manal, H.J. and Asaad, H.S. (2013) High-Pass Digital Filter Implementation Using FPGA. IEEE International Journal of Advanced Computer Science and Applications (IJACSA), 13, 41-50. |
| [8] | Abdullah, H.N. (2008) Design and Implementation of Programmable FIR Filter Using FPGA. Engineering and Technology Journal, 26. |
| [9] | Xilinx White Paper Number 6984. www.xilinx.com |
| [10] | Litwin, L. (2002) FIR and IIR Digital Filters. IEEE Potentials, 19, 28-31. eww150225lx |
评论
发表评论