跳至主要内容

Review of Non-Newtonian Mathematical Models for Rheological Characteristics of Viscoelastic Composites

Read  full  paper  at:
http://www.scirp.org/journal/PaperInformation.aspx?PaperID=53584#.VMng2CzQrzE

Author(s) 
 
ABSTRACT
This study presents an overview of viscoelastic characteristics of biocomposites derived of natural-fibre-reinforced thermoplastic polymers and predictive models has been presented in order to understand their rheological behavior. Various constitutive equations are reviewed for a better understanding of their applicability to polymer melt in determining the viscosity. The models to be investigated are the Giesekus-Leonov model, the Upper Convected Maxwell (UCM) model, the White-Metzner model, K-BKZ model, the Oldroyd-B model, and the Phan-Thien-Tanner models. The aforementioned models are the most powerful for predicting the rheological behavior of hybrid and green viscoelastic materials in the presence of high shear rate and in all dimensions. The Phan-Thien Tanner model, the Oldroyd-B model, and the Giesekus model can be used in various modes to fit the relaxation modulus accurately and to predict the shear thinning as well as shear thickening characteristics. The Phan-Thien Tanner, K-BKZ, Upper convected Maxwell, Oldroyd-B, and Giesekus models predicted the steady shear viscosity and the transient first normal stress co-efficient better than the White-Metzner model for green-fibre-reinforced thermoplastic composites.
 
Cite this paper
Cherizol, R. , Sain, M. and Tjong, J. (2015) Review of Non-Newtonian Mathematical Models for Rheological Characteristics of Viscoelastic Composites. Green and Sustainable Chemistry, 5, 6-14. doi: 10.4236/gsc.2015.51002.
 
References
[1]Anselm, O.O., Joseph, N.A. and Nduji, A.A. (2014) Characterization and Comparison of Rheological Properties of Agro Fiber Filled High-Density Polyethylene Bio-Composites. Open Journal of Polymer Chemistry, 4, 12-19.
http://dx.doi.org/10.4236/ojpchem.2014.41002
 
[2]Mohssine, M., Yves, F. and Mario, F. (2007) A Global Rheological Model of Wood Cantileveras Applied to Wood Drying. Wood Science and Technology, 41, 209-234.
 
[3]Xie, F.W., Halley, P.J. and Avérous, L. (2012) Rheology to Understand and Optimize Processibility, Structures and Properties of Starch Polymeric Materials. Progress in Polymer Science, 37, 595-623.
 
[4]Xiuying Q., Wei L., Hiroshi W., Kang S., Xiaodong, C. (2009) Rheological Behavior of Biocomposites of Silk Fibroin Fiber and Poly(ε-caprolactone): Effect of Fiber Network. Journal of Polymer Science Part B: Polymer Physics, 47, 1957-1970.
 
[5]Zhang, Y., Lim, C.T., Ramakrishna, S. and Huang, Z.M. (2005) Recent Development of Polymer Nanofibers for Biomedical and Biotechnological Applications. Journal of Materials Science: Materials in Medicine, 16, 933-946.
 
[6]http://pioneer.netserv.chula.ac.th/~sanongn1/course.html
 
[7]Marynowski, K. (2006) Two-Dimensional Rheological Element in Modelling of Axially Moving Viscoelastic Web. European Journal of Mechanics—A/Solids, 25, 729-744.
 
[8]Dealy, J.M. and Wissbrun, K.F. (1990) Melt Rheology and Its Role in Plastics Processing—Theory and Applications. Van Nostrand Reinhold, New York.
 
[9]Ansari, M., Hatzikiriakos, S.G. and Mitsoulis, E. (2012) Slip effects in HDPE Flows. Journal of Non-Newtonian Fluid Mechanics, 167-168, 18-29.
 
[10]Ansari, M., Alabbas, A., Hatzikiriakos, S.G. and Mitsoulis, E. (2010) Entry Flow of Polyethylene Melts in Tapered Dies. International Polymer Processing, 25, 287-296.
 
[11]Owens, R.G. and Phillips, T.N. (2002) Computational Rheology. Imperial College Press, London.
 
[12]Han, C. (2007) Rheology and Processing of Polymeric Materials, Vol. 2. Oxford University Press, Oxford.
 
[13]Willett, J.L., Asberg, B.K. and Swanson, C.L. (1995) Rheology of Thermoplastic Starch: Effects of Temperature, Moisture Content, and Additives on Melt Viscosity. Polymer Engineering & Science, 35, 202-210.
http://dx.doi.org/10.1002/pen.760350214
 
[14]James, D.F. (2009) Boger Fluids. Annual Review of Fluid Mechanics, 41, 129-142.
http://dx.doi.org/10.1146/annurev.fluid.010908.165125
 
[15]Leszek, J. and Andrzej, Z. (2011) Mathematical Modelling of Pneumatic Melt Spinning of Isotactic Polypropylene. Part II. Dynamic Model of Melt Blowing. Fibres & Textiles in Eastern Europe, 16, 17-24.
 
[16]Higashitani, K. and Pritchard, W.G. (1972) A Kinematic Calculation of Intrinsic Errors in Pressure Measurements Made with Holes. Transactions of the Society of Rheology, 16, 687.
http://dx.doi.org/10.1122/1.549270
 
[17]Tuna, N.Y. (1984) Finlayson. Journal of Rheology, 2879, 93.
 
[18]Crochet, M.J. and Legat, V. (1992) The Consistent Streamline-Upwind/Petrov-Galerkin Method for Viscoelastic Flow Revisited. Journal of Non-Newtonian Fluid Mechanics, 42, 283-299.
http://dx.doi.org/10.1016/0377-0257(92)87014-3
 
[19]Dealy, J. and Wissbrun, K. (1999) Melt Rheology and Its Role in Plastics Processing: Theory and Applications. Kluwer Academic Publishers, Dordrecht.
 
[20]Doraiswamy, D. (1988) The Origins of Rheology. DuPont iTechnologies, Wilmington.
 
[21]Bird, R.B., Armstrong, R.C. and Hassager, O. (1987) Dynamics of Polymeric Liquids, Fluid Mechanics, Vol. 1. Wiley, New York.
 
[22]Tucker III, C.L. and Advani, S.G. (1994) Processing of Short Fiber System. In: Flow and Rheology in Polymer Composites Manufacturing, Elsevier, Amsterdam, 147-202.
 
[23]Grafe, T. and Graham, K. (2003) Polymeric Nanofibers and Nanofiber Webs: A New Class of Nonwovens. International Nonwovens Journal, 12, 51-55.
 
[24]Zhou, C. and Kumar, S. (2010) Thermal Instabilities in Spinning of Viscoelastic Fibers. Journal of Non-Newtonian Fluid Mechanics, 165, 879-891. http://dx.doi.org/10.1016/j.jnnfm.2010.04.009
 
[25]Jayaraman, K., Kotaki, M., Zhang, Y., Mo, X. and Ramakrishna, S. (2004) Recent Advances in Polymer Nanofibers. Journal of Nanoscience and Nanotechnology, 4, 52-65.
 
[26]Letwimolnun, W., Vergnes, B., Ausias, G. and Carreau, P.J. (2007) Stress Overshoots of Organoclay Nanocomposites in Transient Shear Flow. Journal of Non-Newtonian Fluid Mechanics, 141, 167-179.
 
[27]Collie, S.J., Gerritsen, M. and Jackson, P. (2001) A Review of Turbulence Modelling for Use in Sail Flow Analysis. School of Engineering Report No. 603, Auckland.
 
[28]Denn, M.M. (2008) Continuous Drawing of Liquids to Form Fibers. Annual Review of Fluid Mechanics, 12, 365-387.
http://dx.doi.org/10.1146/annurev.fl.12.010180.002053
 
[29]Denn, M.M. (2008) Polymer Melt Processing: Foundations in Fluid Mechanics and Heat Transfer. Cambridge University Press, New York. http://dx.doi.org/10.1017/CBO9780511813177
 
[30]Krutka, H.M., Shambaugh, R.L. and Papavassiliou, D. (2008) Effects of the Polymer Fiber on the Flow Field from a Slot Melt Blowing Die. Industrial & Engineering Chemistry Research, 47, 935-945.
http://dx.doi.org/10.1021/ie070871i
 
[31]Tanner, R.I. (2000) Engineering Rheology. 2nd Edition, Oxford University Press, Oxford.
 
[32]Denn, M.M., Petrie, C.J.S. and Avenas, P. (1975) Mechanics of Steady Spinning of a Viscoelastic Liquid. AIChE Journal, 21, 791-799. http://dx.doi.org/10.1002/aic.690210423
 
[33]Nonaka, A., Trebotich, D., Miller, G.H., Graves, D.T. and Colella, P. (2009) A Higher-Order Upwind Method for Viscoelastic Fluids. Communications in Applied Mathematics and Computational Science, 4, 57-83.
http://dx.doi.org/10.2140/camcos.2009.4.57
 
[34]da Silva, L.J., Panzera, T.H., Velloso, V.R., Christoforo, A.L. and Scarpa, F. (2012) Hybrid Polymeric Composites Reinforced with Sisal Fibres and Silica Microparticles. Composites Part B, 43, 3436-3444.
http://dx.doi.org/10.1016/j.compositesb.2012.01.026
 
[35]Mitran, S.M. and Yao, L. (2007) A Double Projection Method for Incompressible Viscoelastic Flow. Technical Report, Department of Mathematics University of North Carolina, Chapel Hill.
 
[36]Devereux, B.M. and Denn, M.M. (1994) Frequency Response Analysis of Polymer Melt Spinning. Industrial & Engineering Chemistry Research, 33, 2384-2390. http://dx.doi.org/10.1021/ie00034a020
 
[37]Ellison, C.J., Phatak, A., Giles, D.W., Macosko, C.W. and Bates, F.S. (2007) Melt Blown Nanofibers: Fiber Diameter Distributions and Onset of Fiber Breakup. Polymer, 48, 3306-3316.
http://dx.doi.org/10.1016/j.polymer.2007.04.005
 
[38]Fisher, R.J. and Denn, M.M. (1977) Mechanics of Nonisothermal Polymer Melt Spinning. AIChE Journal, 23, 23-28.
http://dx.doi.org/10.1002/aic.690230105
 
[39]Ellyin, F., Vaziri, R. and Bigot, L. (2007) Predictions of Two Nonlinear Viscoelastic Constitutive Relations for Polymers under Multiaxial Loadings. Polymer Engineering & Science, 47, 593-607.
http://dx.doi.org/10.1002/pen.20731
 
[40]Galante, S.R. (1991) An Investigation of Planar Entry Flow Using a High Resolution Flow Birefringence Method. PhD Thesis, Garnegie Mellon University, Pennsylvania.
 
[41]Burghardt, W.R. and Fuller, G.G. (1989) Note: End Effects in Flow Birefringence Measurements. Journal of Rheology, 33, 771-779. http://dx.doi.org/10.1122/1.550065
 
[42]Kiriakidis, D.G., Park, H.J., Mitsoulis, E., Vergnes, B. and Agassant, J.F. (1989) A Study of Stress Distribution in Contraction Flows of an LLDPE Melt. Journal of Non-Newtonian Fluid Mechanics, 47, 339-356.
http://dx.doi.org/10.1016/0377-0257(93)80057-I
 
[43]Tan, D.H., Zhou, C., Ellison, C.J., Kumar, S., Macosko, C.W. and Bates F.S. (2010) Meltblown Fibers: Influence of Viscosity and Elasticity on the Diameter Distribution. Journal of Non-Newtonian Fluid Mechanics, 165, 892-900.
http://dx.doi.org/10.1016/j.jnnfm.2010.04.012
 
[44]Leszek, J. and Zbigniew, L. (2009) Mathematical Modelling of Pneumatic Melt Spinning of Isotactic Polypropylene. Part III. Computations of the Process Dynamics. Fibres & Textiles in Eastern Europe, 17, 75-80.
 
[45]Altan, M.C., Advani, S.G., Guceri, S.I. and Pipes, R.B. (1989) On the Description of the Orientation State for Fiber Suspensions in Homogeneous Flows. Journal of Rheology, 33, 1129-1155.
http://dx.doi.org/10.1122/1.550047
 
[46]Marders, H., Vergnes, B., Demay, Y. and Agassant, J.F. (1992) Steady Flow of a White-Metzner Fluid in a 2-D Abrupt Contraction: Computation and Experiments. Journal of Non-Newtonian Fluid Mechanics, 45, 63-80.
http://dx.doi.org/10.1016/0377-0257(92)80061-2
 
[47]Phan-Thien, N. and Tanner, R.I. (1977) A New Constitutive Equation Derived from Network Theory. Journal of Non-Newtonian Fluid Mechanics, 2, 353-365.
http://dx.doi.org/10.1016/0377-0257(77)80021-9
 
[48]Phan-Thien, N. (1978) A Nonlinear Network Viscoelastic Model. Journal of Rheology, 22, 259-283.
http://dx.doi.org/10.1122/1.549481
 
[49]Wellington, M., Henrique, T., Admilson, T., Rigoberto, E.M. and André, L. (2007) Numerical Study of a PTT Viscoelastic Fluid Flow through Concentric Annular. 19th International Congress of Mechanical Engineering, Brasília, 5-9 November 2007.
 
[50]Giesekus, H. (1982) A Simple Constitutive Equation for Polymer Fluids Based on the Concept of Deformation-Dependent Tensorial Mobility. Journal of Non-Newtonian Fluid Mechanics, 11, 69-109.
http://dx.doi.org/10.1016/0377-0257(82)85016-7
 
[51]Giesekus, H. (1985) Constitutive Equations for Polymer Fluids Based on the Concept of Configuration-Dependent Molecular Mobility: A Generalized Mean-Configuration Model. Journal of Non-Newtonian Fluid Mechanics, 17, 349- 372.
 
[52]Mostafaiyan, M., Khodabandehlou, K. and Sharif, F. (2004) Analysis of a Viscoelastic Fluid in an Annulus Using Giesekus Model. Journal of Non-Newtonian Fluid Mechanics, 118, 49-55.
http://dx.doi.org/10.1016/j.jnnfm.2004.01.007
 
[53]Isaki, T., Takahashi, M., Takigawa, T. and Masuda, T. (1991) Comparison between Uniaxial and Biaxial Elongational Flow Behavior of Viscoelastic Fluids as Predicted by Differential Constitutive Equations. Rheologica Acta, 30, 530- 539. http://dx.doi.org/10.1007/BF00444371
 
[54]Yarin, A.L., Sinha-Ray, S. and Pourdeyhimi, B. (2010) Meltblowing: II—Linear and Nonlinear Waves on Viscoelastic Polymer Jets. Journal of Applied Physics, 108, Article ID: 034913.
http://dx.doi.org/10.1063/1.3457893
 
[55]Müller, S., Kästner, M., Brummund, J. and Ulbricht, V. (2011) A Nonlinear Fractional Viscoelastic Material Model for Polymers. Computational Materials Science, 50, 2938-2949.
http://dx.doi.org/10.1016/j.commatsci.2011.05.011
 
[56]Luo, X.L. and Tanner, R.I. (1987) A Pseudo-Time Integral Method for Non-Isothermal Viscoelastic Flows and Its Application to Extrusion Simulation. Rheologica Acta, 26, 499-507.
http://dx.doi.org/10.1007/BF01333733
 
[57]Chauvière, C. and Owens, R.G. (2002) A Robust Spectral Element Method for Simulations of Time-Dependent Viscoelastic Flows, Derived from the Brownian Configuration Field Method. Journal of Scientific Computing, 17, 209-218. http://dx.doi.org/10.1023/A:1015152631360
 
[58]Cirulis, J.T., Keeley, F.W. and James, D.F. (2010) Viscoelastic Properties and Gelation of an Elastin-Like Polypeptide. Journal of Rheology, 53, 1215-1228. http://dx.doi.org/10.1122/1.3177005
 
[59]Oldroyd, J.G. (1950) On the Formulation of Rheological Equations of State. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 200, 523-541.
http://dx.doi.org/10.1098/rspa.1950.0035
 
[60]Oliveira, P.J. (2009) Alternative Derivation of Differential Constitutive Equations of the Oldroyd-B Type. Journal of Non-Newtonian Fluid Mechanics, 160, 40-46. http://dx.doi.org/10.1016/j.jnnfm.2008.11.013
 
[61]Byron, R., Bird, R. and Robert, C. (1987) Armstrong, and Ole Hassager, Dynamics of Polymeric Liquids, Volume 1: Fluid Mechanics. 2nd Edition, John Wiley & Sons, New York.
 
[62]Trebotich, D., Colella, P. and Miller, G.H. (2005) A Stable and Convergent Scheme for Viscoelastic Flow in Contraction Channels. Journal of Computational Physics, 205, 315-342.
http://dx.doi.org/10.1016/j.jcp.2004.11.007                       eww150129lx
标签：

评论

发表评论

此博客中的热门博文

A Comparison of Methods Used to Determine the Oleic/Linoleic Acid Ratio in Cultivated Peanut (Arachis hypogaea L.)

Cultivated peanut ( Arachis hypogaea L.) is an important oil and food crop. It is also a cheap source of protein, a good source of essential vitamins and minerals, and a component of many food products. The fatty acid composition of peanuts has become increasingly important with the realization that oleic acid content significantly affects the development of rancidity. And oil content of peanuts significantly affects flavor and shelf-life. Early generation screening of breeding lines for high oleic acid content greatly increases the efficiency of developing new peanut varieties. The objective of this study was to compare the accuracy of methods used to classify individual peanut seed as high oleic or not high oleic. Three hundred and seventy-four (374) seeds, spanning twenty-three (23) genotypes varying in oil composition (i.e. high oleic (H) or normal/not high oleic (NH) inclusive of all four peanut market-types (runner, Spanish, Valencia and Virginia), were individually tested ...
发表评论
阅读全文

Location Optimization of a Coal Power Plant to Balance Costs against Plant’s Emission Exposure

Fuel and its delivery cost comprise the biggest expense in coal power plant operations. Delivery of electricity from generation to consumers requires investment in power lines and transmission grids. Placing a coal power plant or multiple power plants near dense population centers can lower transmission costs. If a coalmine is nearby, transportation costs can also be reduced. However, emissions from coal plants play a key role in worsening health crises in many countries. And coal upon combustion produces CO 2 , SO 2 , NO x , CO, Metallic and Particle Matter (PM10 & PM2.5). The presence of these chemical compounds in the atmosphere in close vicinity to humans, livestock, and agriculture carries detrimental health consequences. The goal of the research was to develop a methodology to minimize the public’s exposure to harmful emissions from coal power plants while maintaining minimal operational costs related to electric distribution losses and coal logistics. The objective was...
发表评论
阅读全文

Evaluation of the Safety and Efficacy of Continuous Use of a Home-Use High-Frequency Facial Treatment Appliance

At present, many home-use beauty devices are available in the market. In particular, many products developed for facial treatment use light, e.g., a flash lamp or a light-emitting diode (LED). In this study, the safety of 4 weeks’ continuous use of NEWA TM , a high-frequency facial treatment appliance, every alternate day at home was verified, and its efficacy was evaluated in Japanese individuals with healthy skin aged 30 years or older who complained of sagging of the facial skin.  Transepidermal water loss (TEWL), melanin levels, erythema levels, sebum secretion levels, skin color changes and wrinkle improvement in the facial skin were measured before the appliance began to be used (study baseline), at 2 and 4 weeks after it had begun to be used, and at 2 weeks after completion of the 4-week treatment period (6 weeks from the study baseline). In addition, data obtained by subjective evaluation by the subjects themselves on a visual analog scale (VAS) were also analyzed. Fur...
发表评论
阅读全文