跳至主要内容

Prediction of the Microstructural Variations of Cold-Worked Pure Aluminum during Annealing Process

Read  full  paper  at:
http://www.scirp.org/journal/PaperInformation.aspx?PaperID=52924#.VKygRcnQrzE

ABSTRACT
The mechanical properties such as hardness and ultimate tensile strength of metals depend on the grain size, which have to be properly controlled and optimized to ensure the better economy and desirable mechanical characteristics of the metals. In order to study the microstructure evolution of AA1070, many experimental tests were conducted at different cold working and annealing conditions. Utilizing the experimental results, the static recrystallization and grain growth behavior of AA1070 have been investigated and the developed equations that can be used to the FEM of the annealing process have been obtained. The agreement between numerical modeling and experimental results is reasonably good for this material. The results showed that the recrystallization and grain growth behavior of AA1070 was evidently affected by both the annealing temperature and plastic strain.
 
Cite this paper
Ashtiani, H. and Karami, P. (2015) Prediction of the Microstructural Variations of Cold-Worked Pure Aluminum during Annealing Process. Modeling and Numerical Simulation of Material Science, 5, 1-14. doi: 10.4236/mnsms.2015.51001.
 
References
[1]Totten, G.E. and MacKenzie, D.S. (2003) Handbook of Aluminium. In: Physical Metallurgy and Processes, Marcel Dekker, New York, 66-73.
 
[2]Humphrey, F.J. and Hatherly, M. (2004) Recrystallization and Related Annealing Phenomena. Elsevier Ltd., Oxford.
 
[3]McQueen, H.J. and Blume, W. (1998) Recovery and Recrystallization in Al Alloys: Fundamentals and Practical Applications. In: Sato, T., Kumai, S., Kobayashi, T. and Murakami, Y., Eds., Proceedings of the 6th International Conference on Aluminum Alloys (ICAA6), Japan Institute of Light Metals, Tokyo, 99-112.
 
[4]Saeter, J.A., Forbord, B., Vatne, H.E. and Nes, E. (1998) Modelling Recovery and Recrystallization, Applied to Back- Annealing of Aluminium Sheet Alloys. In: Sato, T., Kumai, S., Kobayashi, T. and Murakami, Y., Eds., Proceedings of the 6th International Conference on Aluminum Alloys (ICAA6), Japan Institute of Light Metals, Tokyo, 113-126.
 
[5]Humphreys, F.J. (1999) A New Analysis of Recovery, Recrystallization and Grain Growth. Materials Science and Technology, 15, 37-44. http://dx.doi.org/10.1179/026708399773002791
 
[6]Orsetti Rossi, P.L. and Sellars, C.M. (1997) Quantitative Metallography of Recrystallization. Acta Materialia, 45, 137-148. http://dx.doi.org/10.1016/S1359-6454(96)00167-X
 
[7]Vandermeer, R.A. and Jensen, D.J. (2001) Microstructural Path and Temperature Dependence of Recrystallization in Commercial Aluminum. Acta Materialia, 49, 2083-2094.
http://dx.doi.org/10.1016/S1359-6454(01)00074-X
 
[8]Lin, Y.C., Chen, M.S. and Zhong, J. (2008) Study of Static Recrystallization Kinetics in a Low Alloy Steel. Computational Materials Science, 44, 316-321.
http://dx.doi.org/10.1016/j.commatsci.2008.03.027
 
[9]Takaki, T. and Tomita, Y. (2010) Static Recrystallization Simulations Starting from Predicted Deformation Microstructure by Coupling Multi-Phase-Field Method and Finite Element Method Based on Crystal Plasticity. International Journal of Mechanical Sciences, 52, 320-328.
http://dx.doi.org/10.1016/j.ijmecsci.2009.09.037
 
[10]Toloui, M. and Serajzadeh, S. (2007) Modelling Recrystallization Kinetics during Hot Rolling of AA5083. Journal of Materials Processing Technology, 184, 345-353.
http://dx.doi.org/10.1016/j.jmatprotec.2006.11.227
 
[11]Lin, Y.C., Liu, G., Chen, M.S. and Zhong, J. (2009) Prediction of Static Recrystallization in a Multi-Pass Hot Deformed Low-Alloy Steel Using Artificial Neural Network. Journal of Materials Processing Technology, 209, 4611- 4616. http://dx.doi.org/10.1016/j.jmatprotec.2008.10.020
 
[12]Seyed Salehi, M. and Serajzadeh, S. (2010) A Neural Network Model for Prediction of Static Recrystallization Kinetics under Non-Isothermal Conditions. Journal of Materials Processing Technology, 49, 773-781.
http://dx.doi.org/10.1016/j.commatsci.2010.06.021
 
[13]Seyed Salehi, M. and Serajzadeh, S. (2012) Simulation of Static Recrystallization in Non-Isothermal Annealing Using a Coupled Cellular Automata and Finite Element Model. Computational Materials Science, 53, 145-152.
http://dx.doi.org/10.1016/j.commatsci.2011.09.026
 
[14]Cho, J.R., Jeong, H.S., Cha, D.J., Bae, W.B. and Lee, J.W. (2005) Prediction of Microstructural Evolution and Recrystallization Behaviors of a Hot Working Die Steel by FEM. Journal of Materials Processing Technology, 160, 1-8.
http://dx.doi.org/10.1016/j.jmatprotec.2004.01.001
 
[15]Wang, K.L., Fu, M.W., Lu, S.Q. and Li, X. (2011) Study of the Dynamic Recrystallization of Ti-6.5Al-3.5Mo-1.5Zr- 0.3Si Alloy in β-Forging Process via Finite Element Method Modeling and Microstructure Characterization. Materials & Design, 32, 1283-1291.
http://dx.doi.org/10.1016/j.matdes.2010.09.033
 
[16]Serajzadeh, S. (2007) A Study on Kinetics of Static and Metadynamic Recrystallization during Hot Rolling. Materials Science and Engineering: A, 448, 146-153.
http://dx.doi.org/10.1016/j.msea.2006.10.070
 
[17]Vandermeer, R.A. and Juul Jensen, D. (2003) Recrystallization in Hot vs Cold Deformed Commercial Aluminum: A Microstructure Path Comparison. Acta Materialia, 51, 3005-3018.
http://dx.doi.org/10.1016/S1359-6454(03)00112-5
 
[18]Lauridsen, E.M., Poulsen, H.F., Nielsen, S.F. and Juul Jensen, D. (2003) Recrystallization Kinetics of Individual Bulk Grains in 90% Cold-Rolled Aluminium. Acta Materialia, 51, 4423-4435.
http://dx.doi.org/10.1016/S1359-6454(03)00278-7
 
[19]Poulsen, S.O., Lauridsen, E.M., Lyckegaard, A., Oddershede, J., Gundlach, C., Curfs, C. and Juul Jensen, D. (2011) In Situ Measurements of Growth Rates and Grain-Averaged Activation Energies of Individual Grains during Recrystallization of 50% Cold-Rolled Aluminium. Scripta Materialia, 64, 1003-1006.
http://dx.doi.org/10.1016/j.scriptamat.2011.01.046
 
[20]Nielsen, S.F., Schmidt, S., Lauridsen, E.M., Yiu, H., Savoie, J., Zeng, M. and Juul Jensen, D. (2003) Growth Kinetics of Individual Grains during Recrystallization with an Intermediate Cooling Cycle. Scripta Materialia, 48, 513-518.
http://dx.doi.org/10.1016/S1359-6462(02)00499-2
 
[21]Kim, H.C., Kang, C.G, Huh, M.Y. and Engler, O. (2007) Effect of Primary Recrystallization Texture on Abnormal Grain Growth in an Aluminum Alloy. Scripta Materialia, 57, 325-327.
http://dx.doi.org/10.1016/j.scriptamat.2007.04.023
 
[22]Parvizian, F., Kayser, T., Hortig, C. and Svendsen, B. (2009) Thermomechanical Modeling and Simulation of Aluminum Alloy Behavior during Extrusion and Cooling. Journal of Materials Processing Technology, 209, 876-883.
http://dx.doi.org/10.1016/j.jmatprotec.2008.02.076
 
[23]Huang, Y.D. and Froyen, L. (2002) Recovery, Recrystallization and Grain Growth in Fe3Al-Based Alloys. Intermetallics, 10, 473-484. http://dx.doi.org/10.1016/S0966-9795(02)00019-5                eww150107lx
 
[24]Zhang, J.M., Gao, Z.Y., Zhuang, J.Y. and Zhong, Z.Y. (2000) Grain Growth Model of IN718 during Holding Period after Hot Deformation. Journal of Materials Processing Technology, 101, 25-30.
http://dx.doi.org/10.1016/S0924-0136(99)00437-9
 
[25]Puchi Cabrera, E.S., Villalobos Gutierrez, C.J., Carrillo, A. and DiSimone, F. (2003) Non-Isothermal Annealing of a Cold Rolled Commercial Twin Roll Cast 3003 Aluminum Alloy. Journal of Materials Engineering and Performance, 12, 261-271. http://dx.doi.org/10.1361/105994903770343105
 
[26]Slamova, M., Ocenasek, V. and Vander Voort, G. (2004) Polarized Light Microscopy: Utilization in the Investigation of the Recrystallization of Aluminum Alloys. Materials Characterization, 52, 165-177.
http://dx.doi.org/10.1016/j.matchar.2003.10.010
 
[27]Rezaei Ashtiani, H.R., Parsa, M.H. and Bisadi, H. (2012) Effects of Initial Grain Size on Hot Deformation Behavior of Commercial Pure Aluminum. Materials & Design, 42, 478-485. http://dx.doi.org/10.1016/j.matdes.2012.06.021
标签：

评论

发表评论

此博客中的热门博文

Does Immigration Promote the Investment of the Monopolistic Firm?

In the present paper, we examine the effect of increasing uncertainty of immigrants’ growth on the optimal timing of investment of a firm that has a monopolistic power over the labor market. It is revealed that when the uncertainty of immigrants’ growth is more than a threshold level, increasing uncertainty of immigrants’ growth accelerates the optimal timing of firms’ investment and enhances the economic growth, even if the uncertainty of immigrants’ growth is formulated by the geometric Brownian motion, which is in sharp contrast to the standard result that an increase in the uncertainty postpones the optimal timing. With an increase in the immigrants over the past ten years, workforces in the host countries have been growing significantly to the extent that the immigrants represent 70% of the increase in the workforce in Europe, and 47% in the United States as OECD indicates. In the present paper, we attempted to investigate the effect of increased uncertainty caused by the growi...
发表评论
阅读全文

Education Policy Implementation: A Mechanism for Enhancing Primary Education Development in Zanzibar

Education is one of the fundamental rights of individuals; therefore, the government of a country needs to develop and strengthen educational policy and quality as well as to ensure that everyone has equal access to basic education. The improvement of access and quality of education in the world is becoming as an essential factor in development, whereas the basic education (primary school), is acknowledged as a foundation of the higher educational development for every country. To fulfill this goal, governments introduce several policies and procedures; however, it requires some reforms and participation from the politician, policymakers, and other stakeholders to re-examine educational policy so that it can lead to multiplication and betterment of the reforms. Educational reforms actually focus on accountability. A positive educational development and reform is very challenging and needs more effort and strategy on how to use and utilize the resources effectively as such it can achie...
发表评论
阅读全文