跳至主要内容

Optimum Combination of Femoral Head Size, Femoral Head Material, and Acetabular Cup Liner’s Highly-Cross-Linked Polyethylene Brand for Hip Implant

Read  full  paper  at:
http://www.scirp.org/journal/PaperInformation.aspx?PaperID=53277#.VLxqgcnQrzE

ABSTRACT
Clinical two-dimensional linear wear rate data for acetabular cup liners fabricated using approved brands of highly cross-linked ultra-high-molecular-weight polyethylene, as reported in 39 articles in the literature, were analyzed using a statistical technique called response surface methodology. The output was a series comprising16 acceptable combinations of femoral head diameter (HD), femoral head material (HM), and HXLPE brand (PB), each of which would yield the optimum wear rate (herein taken to be a wear rate of practically zero). An example of such a combination is 28- mm-diameter Oxinium® femoral head articulated against an acetabular cup liner fabricated from ReflectionTM HXLPE. The findings in this work may guide an orthopaedic surgeon’s selection of the combination of HD, HM, and PB to use in a primary total hip joint replacement.
 
Cite this paper
Lewis, G. and Werdofa, D. (2015) Optimum Combination of Femoral Head Size, Femoral Head Material, and Acetabular Cup Liner’s Highly-Cross-Linked Polyethylene Brand for Hip Implant. Journal of Biomedical Science and Engineering, 8, 31-39. doi: 10.4236/jbise.2015.81003.
 
References
[1]Kurtz, S.M., Gawel, H.A. and Patel, J.D. (2011) History and Systematic of Wear and Osteolysis Outcomes for First-Generation Highly Crosslinked Polyethylene. Clinical Orthopaedics and Related Research, 469, 2262-2277.
http://dx.doi.org/10.1007/s11999-011-1872-4
 
[2]Martell, J.M., Verner, J.J. and Incavo, S.J. (2003) Clinical Performance of a Highly Cross-Linked Polyethylene at Two Years in Total Hip Arthroplasty: A Randomized Prospective Trial. The Journal of Arthroplasty, 18, 55-59.
http://dx.doi.org/10.1016/S0883-5403(03)00341-3
 
[3]Hopper, R.H., Young, A.M., Orishimo, K.F. and McAuley, J.P. (2003) Correlation between Early and Late Wear Rates in Total Hip Arthroplasty with Application to the Performance of Marathon Cross-Linked Polyethylene Liners. The Journal of Arthroplasty, 18, 60-67.
http://dx.doi.org/10.1016/S0883-5403(03)00294-8
 
[4]Krushell, R.J., Fingeroth, R.J. and Cushing, M.C. (2005) Early Femoral Head Penetration of a Highly Cross-Linked Polyethylene Liner vs a Conventional Polyethylene Liner. The Journal of Arthroplasty, 20, 73-76.
http://dx.doi.org/10.1016/j.arth.2005.05.008
 
[5]D’Antonio, J.A., Manley, M.T., Capello, W.N., Bierbaum, B.E., Ramakrishnan, R., Naughton, M. and Sulton, K. (2005) Five-Year Experience with Crossfire Highly Cross-Linked Polyethylene. Clinical Orthopaedics and Related Research, 441, 143-150.
http://dx.doi.org/10.1097/00003086-200512000-00024
 
[6]Manning, D.W., Chiang, P.P., Martell, J.M., Galante, J.O. and Harris, W.H. (2005) In Vivo Comparative Wear Study of Traditional and Highly Cross-Linked Polyethylene in Total Hip Arthroplasty. The Journal of Arthroplasty, 20, 880-886.
http://dx.doi.org/10.1016/j.arth.2005.03.033
 
[7]Dorr, L.D., Wan, Z., Shahrdar, C., Sirianni, L., Boutary, M. and Yun, A. (2005) Clinical Performance and a Durasul Highly Cross-Linked Polyethylene Acetabular Liner for Total Hip Arthroplasty at Five Years. Journal of Bone and Joint Surgery, 87-A, 1816-1821.
 
[8]Engh Jr., C.A., Stepniewski, A.S., Ginn, S.D., Beykirch, S.E., Sychterz-Terefenko, C.J., Hopper, R.H. and Engh, C.A. (2006) A Randomized Prospective Evaluation of Outcomes after Total Hip Arthroplasty Sing Cross-Linked Marathon and Non-Cross-Linked Enduron Polyethylene Liners. The Journal of Arthroplasty, 21, 17-25.
http://dx.doi.org/10.1016/j.arth.2006.05.002
 
[9]Bradgon, C.R., Barrett, S., Martell, J.M., Greene, M.E., Malchau, H. and Harris, W.H. (2006) Steady-State Penetration Rates of Electron Beam-Irradiated, Highly Cross-Linked Polyethylene at an Average 45-Month Follow-Up. The Journal of Arthroplasty, 21, 935-943.
 
[10]Oonishi, H., Kim, S.C., Takao, Y., Kyomoto, M., Iwamoto, M. and Ueno, M. (2006) Wear of Highly Cross-Linked Polyethylene Acetabular Cup in Japan. The Journal of Arthroplasty, 21, 944-949.
http://dx.doi.org/10.1016/j.arth.2006.03.009
 
[11]Bragdon, C.R., Kwan, Y.M., Geller, J.A., Greene, M.E., Freiberg, A.A., Harris, W.H. and Malchau, H. (2007) Minimum 6-Year Follow-Up of Highly Cross-Linked Polyethylene in THA. Clinical Orthopaedics and Related Research, 465, 122-127.
 
[12]Leung, S.B., Egawa, H., Stepnieswski, A., Beykirch, S., Engh, C.A. and Engh, C.A. (2007) Incidence and Volume of Pelvic Osteolysis at Early Follow-Up with Highly Cross-Linked and Noncross-Linked Polyethylene. Journal of Arthroplasty, 22, 134-139.
http://dx.doi.org/10.1016/j.arth.2007.04.006
 
[13]Rohrl, S.M., Li, M.G., Nilsson, K.G. and Nivbrant, B. (2007) Very Low Wear of Non-Remelted Highly Cross-Linked Polyethylene Cups: An RSA Study Lasting up to 6 Years. Acta Orthopaedica, 78, 739-745.
http://dx.doi.org/10.1080/17453670710014509
 
[14]Triclot, P., Grosjean, G., Masri, F.E., Courpied, J.P. and Hamadouche, M. (2007) A Comparison of Penetration Rate of Two Polyethylene Acetabular Liners of Different Levels of Cross-Linked: A Prospective Randomized Trial. Journal of Bone and Joint Surgery-British Volume, 89-B, 1439-1445.
http://dx.doi.org/10.1302/0301-620X.89B11.19543
 
[15]Olyslaegers, C., Defoort, K., Simon, J.P. and Vandenberghe, L. (2008) Wear in Conventional and Highly Cross-Linked Polyethylene Cups: A 5-Year Follow-Up Study. Journal of Arthroplasty, 23, 489-494.
http://dx.doi.org/10.1016/j.arth.2007.02.013
 
[16]Glyn-Jones, S., Smith, P.M., Gill, H.S. and Murray, D.W. (2008) The Creep and Wear of Highly Cross-Linked Polyethylene: A Three-Year Randomized, Controlled Trial Using Radiostereometric Analysis. Journal of Bone and Joint Surgery-British Volume, 90-B, 556-561.
http://dx.doi.org/10.1302/0301-620X.90B5.20545
 
[17]Bitsch, R.G., Loidolt, T., Heisel, C., Ball, S. and Schmalzried, T.P. (2008) Reduction of Osteolysis with Use of Marathon Cross-Linked Polyethylene: A Concise Follow-Up, at a Minimum of Five Years, of a Previous Report. Journal of Bone and Joint Surgery (American), 90, 1487-1491.
http://dx.doi.org/10.2106/JBJS.F.00991
 
[18]Garvin, K.L., Hartman, C.W., Mangla, J., Murdoch, N. and Martell, J.M. (2009) Wear Analysis in THA Utilizing Zirconium and Cross-Linked Polyethylene. Clinical Orthopaedics and Related Research, 467, 141-145.
http://dx.doi.org/10.1007/s11999-008-0544-5
 
[19]Rajadhyaksha, A.M., Brotea, C., Cheung, Y., Kuhn, C., Ramakrishnan, R. and Zelicof, S.B. (2009) Five-Year Comparative Study of Highly Cross-Linked (Crossfire) and Traditional Polyethylene. Journal of Arthroplasty, 24, 161-167.
http://dx.doi.org/10.1016/j.arth.2007.09.015
 
[20]Calvert, G.T., Devane, P.A., Fielden, J., Adams, K. and Horne, J.G. (2009) A Double-Blind, Prospective, Randomized Controlled Trial Comparing Highly Cross-Linked and Conventional Polyethylene in Primary Total Hip Arthroplasty. Journal of Arthroplasty, 24, 505-510.
http://dx.doi.org/10.1016/j.arth.2008.02.011
 
[21]Kim, Y.H., Kim, J.S., Choi, Y.W. and Kwon, O.R. (2009) Intermediate Results of Simultaneous Alumina-on-Alumina Bearing and Alumina-on-Highly Cross-Linked Polyethylene Bearing Total Hip Arthroplasties. Journal of Arthroplasty, 24, 885-891.
http://dx.doi.org/10.1016/j.arth.2008.05.009
 
[22]Geerdink, C.H., Grimm, B., Vencken, W., Heyligers, I.C. and Tonino, A.J. (2009) Cross-Linked Compared with Historical Polyethylene in THA: An 8-Year Clinical Study. Clinical Orthopaedics and Related Research, 467, 979-984.
http://dx.doi.org/10.1007/s11999-008-0628-2
 
[23]Yun, H.H., Jajodia, N.K., Myung, J.S., Oh, J.K., Park, S.W. and Shon, W.Y. (2009) Use of Slide Presentation Software as a Tool to Measure Hip Arthroplasty Wear. Journal of Arthroplasty, 24, 1210-1215.
http://dx.doi.org/10.1016/j.arth.2009.06.012
 
[24]Ise, K., Kawanabe, K., Tamura, J., Akiyama, H., Goto, K. and Nakamura, T. (2009) Clinical Results of the Wear Performance of Cross-Linked Polyethylene in Total Hip Arthroplasty, Prospective Randomized Trial. Journal of Arthroplasty, 24, 1216-1220.
http://dx.doi.org/10.1016/j.arth.2009.05.020
 
[25]Kawate, K., Ohmura, T., Kawahara, I., Tamai, K., Ueha, T. and Takemura, K. (2009) Differences in Highly Cross- Linked Polyethylene Wear between Zirconia and Cobalt-Chromium Femoral Heads in Japanese Patients. Journal of Arthroplasty, 24, 1221-1224.
http://dx.doi.org/10.1016/j.arth.2009.05.023
 
[26]Beksac, B., Salas, A., Della Valle, A.G. and Salvati, E.A. (2009) Wear in Reduced in THA Performed with Highly Cross-Linked Polyethylene. Clinical Orthopaedics and Related Research, 467, 1765-1772.
http://dx.doi.org/10.1007/s11999-008-0661-1
 
[27]Shia, D.S., Clohisy, J.C., Schinsky, M.F., Martell, J.M. and Maloney, W.J. (2009) THA with Highly Cross-Linked Polyethylene in Patients 50 Years or Younger. Clinical Orthopaedics and Related Research, 467, 2059-2065.
http://dx.doi.org/10.1007/s11999-008-0697-2
 
[28]Lachiewicz, P.F., Heckman, D.S., Soileau, E.S., Mangla, J. and Martell, J.M. (2009) Femoral Head Size and Wear of Highly Cross-Linked Polyethylene at 5 to 8 Years. Clinical Orthopaedics and Related Research, 467, 3290-3296.
http://dx.doi.org/10.1007/s11999-009-1038-9
 
[29]Campbell, D., Mercer, G., Nilson, K.G., Wells, V., Field, J.R. and Callary, S.A. (2010) Wear of a Highly Cross-Linked Polyethylene Liner: A Preliminary RSA Study. European Journal of Orthopaedic Surgery & Traumatology, 20, 23-27.
http://dx.doi.org/10.1007/s00590-009-0486-y
 
[30]Fukui, K., Kaneuji, A., Sugimori, T., Ichiseki, T., Kitamura, K. and Matsumoto, T. (2011) Wear Comparison between a Highly Cross-Linked Polyethylene and Conventional Polyethylene against a Zirconia Femoral Head: Minimum 5-Year Follow-Up. Journal of Arthroplasty, 26, 45-49.
http://dx.doi.org/10.1016/j.arth.2009.11.005
 
[31]Whittaker, J.P., Charron, K.D., McCalden, R.W., MacDonald, S.J. and Bourne, R.B. (2010) Comparison of Steady State Femoral Head Penetration Rates between Two Highly Cross-Linked Polyethylenes in Total Hip Arthroplasty. Journal of Arthroplasty, 25, 680-686.
http://dx.doi.org/10.1016/j.arth.2009.05.006
 
[32]Hammerberg, E.M., Wan, Z., Dastane, M. and Dorr, L.D. (2010) Wear and Range of Motion of Different Femoral Head Sizes. Journal of Arthroplasty, 25, 839-843.
http://dx.doi.org/10.1016/j.arth.2009.07.007
 
[33]Nakahara, I., Nakamura, N., Nishii, T., Miki, H., Sakai, T. and Sugano, N. (2010) Minimum Five-Year Follow-Up Wear Measurement of Longevity Highly Cross-Linked Polyethylene Cup against Cobalt-Chromium or Zirconia Heads. Journal of Arthroplasty, 25, 1182-1187.
http://dx.doi.org/10.1016/j.arth.2009.09.006
 
[34]Campbell, D., Field, J.R. and Callary, S.A. (2010) Second-Generation Highly Cross-Linked X3 Polyethylene Wear: A Preliminary Radiostereometric Analysis Study. Clinical Orthopaedics and Related Research, 468, 2704-2709.
http://dx.doi.org/10.1007/s11999-010-1259-y
 
[35]Mutimer, J., Devane, P.A., Adams, K. and Horne, J.G. (2010) Highly Crosslinked Polyethylene Reduces Wear in Total Hip Arthroplasty at 5 Years. Clinical Orthopaedics and Related Research, 468, 3228-3233.
http://dx.doi.org/10.1007/s11999-010-1379-4
 
[36]Meftah, M., Ebrahimpour, B., He, C., Rabawat, A.S. and Ranawat, C.S. (2011) Short-Term Analysis and Clinical Performance of Large Ceramic Heads on Highly Cross-Linked Polyethylene in Young and Active Patients. Seminars in Arthroplasty, 22, 225-228.
http://dx.doi.org/10.1053/j.sart.2011.09.002
 
[37]Mall, N.A., Nunley, R.M., Zhu, J.J., Maloney, W.J., Barrack, R.L. and Clohisy, J.C. (2011) The Incidence of Acetabular Osteolysis in Young Patients with Conventional versus Highly Crosslinked Polyethylene. Clinical Orthopaedics and Related Research, 469, 372-381.
http://dx.doi.org/10.1007/s11999-010-1518-y
 
[38]Capello, W.N., D’Antonio, J.A., Ramakrishnan, R. and Naughton, M. (2011) Continued Improved Wear with an Annealed Highly Cross-Linked Polyethylene. Clinical Orthopaedics and Related Research, 469, 825-830.
http://dx.doi.org/10.1007/s11999-010-1556-5
 
[39]Rohrl, S.M., Nivbrant, B. and Nilsson, K.G. (2012) No Adverse Effects of Submelt-Annealed Highly Crosslinked Polyethylene in Cemented Cups. An RSA Study of 8 Patients 10 Years after Surgery. Acta Orthopaedica, 83, 148-152.
http://dx.doi.org/10.3109/17453674.2011.652889
 
[40]Ranawat, A.S., Tsallis, P., Meftah, M., Koob, T.W., Rodriguez, J.A. and Ranawat, C.S. (2012) Minimum 5-Year Wear Analysis of First-Generation Highly Cross-Linked Polyethylene in Patients 65 Years and Younger. Journal of Arthroplasty, 27, 354-357.
http://dx.doi.org/10.1016/j.arth.2011.07.003
 
[41]Johanson, P.E., Digas, G., Herberts, P., Thanner, J. and Karrholm, J. (2012) Highly Crosslinked Polyethylene Does Not Reduce Aseptic Loosening in Cemented THA 10-Year Findings of a Randomized Study. Clinical Orthopaedics and Related Research, 470, 3083-3093.
http://dx.doi.org/10.1007/s11999-012-2400-x
 
[42]Bradgon, C.R., Doerner, M., Martell, J., Jarrett, B., Palm, H. and Malchau, H., Multicenter Study Group (2013) The 2012 John Charnley Award: Clinical Multicenter Studies of the Wear Performance of Highly Crosslinked Remelted Polyethylene in THA. Clinical Orthopaedics and Related Research, 471, 393-402.
http://dx.doi.org/10.1007/s11999-012-2604-0
 
[43]Babovic, N. and Trousdale, R.T. (2013) Total Hip Arthroplasty Using Highly Cross-Linked Polyethylene in Patients Younger than 50 Years with Minimum 10-Year Follow-Up. Journal of Arthroplasty, 28, 815-817.
http://dx.doi.org/10.1016/j.arth.2012.12.005
 
[44]Callary, S.A., Campbell, D.G., Mercer, G., Nilsson, K.G. and Field, J.R. (2013) Wear of a 5 Megarad Cross-Linked Polyethylene Liner: A 6-Year RSA Study. Clinical Orthopaedics and Related Research, 471, 2238-2244.
http://dx.doi.org/10.1007/s11999-013-2789-x
 
[45]Kim, Y.H., Park, J.W., Patel, C. and Kim, D.Y. (2013) Polyethylene Wear and Osteolysis after Cementless Total Hip Arthroplasty with Alumina-on-Highly Cross-Linked Polyethylene Bearings in Patients Younger than Thirty Years of Age. Journal of Bone and Joint Surgery (American), 95, 1088-1093.
http://dx.doi.org/10.2106/JBJS.L.01211
 
[46]Fukui, K., Kaneuji, A., Sugimori, T., Ichiseki, T. and Matsumoto, T. (2013) Wear Comparison between Conventional and Highly Cross-Linked Polyethylene against a Zirconia Head: A Concise Follow-Up, at an Average 10 Years, of a Previous Report. Journal of Arthroplasty, 28, 1654-1658.
http://dx.doi.org/10.1016/j.arth.2012.12.020
 
[47]Callary, S.A., Field, F.R. and Campbell, D.G. (2013) Long Wear of a Second-Generation Highly Crosslinked Polyethylene Liner: A 5-Year Radiostereometric Analysis Study. Clinical Orthopaedics and Related Research, 471, 3596- 3600.
http://dx.doi.org/10.1007/s11999-013-3188-z
 
[48]Myers, R.H. (2008) RSM: Process and Product Optimization Using Designed Experiments. John Wiley & Sons, Inc, New York.
 
[49]Haraguchi, K., Sugano, N., Nishii, T., Miki, H., Oka, K. and Yoshikawa, H. (2001) Phase Transformation of a Zirconia Ceramic Head after Total Hip Arthroplasty. Journal of Bone and Joint Surgery, 83-B, 996-1000.
http://dx.doi.org/10.1302/0301-620X.83B7.12122
 
[50]Stroh, D.A., Issa, K., Johnson, A.J., Delanois, R.E. and Mont, M.A. (2013) Reduced Dislocation Rates and Excellent Functional Outcomes with Large-Diameter Femoral Heads. Journal of Arthroplasty, 28, 1415-1420.
http://dx.doi.org/10.1016/j.arth.2012.11.017
 
[51]Allen, C.L., Hooper, G.J. and Frampton, C.M.A. (2014) Do Larger Femoral Heads Improve the Functional Outcome in Total Hip Arthroplasty? Journal of Arthroplasty, 29, 401-404.
http://dx.doi.org/10.1016/j.arth.2013.06.017
 
[52]Martell, J.M., Berkson, E., Berger, R. and Jacobs, J. (2003) Comparison of Two- and Three-Dimensional Computerized Polyethylene Wear Analysis after Total Hip Arthroplasty. Journal of Bone and Joint Surgery, 85-A, 1111-1117.
 
[53]Aggarwal, M.L. and Bansal, A. (1998) Robust Response Surface Designs for Qualitative and Quantitative Factors. Communications in Statistics-Theory and Methods, 27, 89-106.
http://dx.doi.org/10.1080/03610929808832652                                                                  eww150119lx
标签：

评论

发表评论

此博客中的热门博文

Does Immigration Promote the Investment of the Monopolistic Firm?

In the present paper, we examine the effect of increasing uncertainty of immigrants’ growth on the optimal timing of investment of a firm that has a monopolistic power over the labor market. It is revealed that when the uncertainty of immigrants’ growth is more than a threshold level, increasing uncertainty of immigrants’ growth accelerates the optimal timing of firms’ investment and enhances the economic growth, even if the uncertainty of immigrants’ growth is formulated by the geometric Brownian motion, which is in sharp contrast to the standard result that an increase in the uncertainty postpones the optimal timing. With an increase in the immigrants over the past ten years, workforces in the host countries have been growing significantly to the extent that the immigrants represent 70% of the increase in the workforce in Europe, and 47% in the United States as OECD indicates. In the present paper, we attempted to investigate the effect of increased uncertainty caused by the growi...
发表评论
阅读全文

Education Policy Implementation: A Mechanism for Enhancing Primary Education Development in Zanzibar

Education is one of the fundamental rights of individuals; therefore, the government of a country needs to develop and strengthen educational policy and quality as well as to ensure that everyone has equal access to basic education. The improvement of access and quality of education in the world is becoming as an essential factor in development, whereas the basic education (primary school), is acknowledged as a foundation of the higher educational development for every country. To fulfill this goal, governments introduce several policies and procedures; however, it requires some reforms and participation from the politician, policymakers, and other stakeholders to re-examine educational policy so that it can lead to multiplication and betterment of the reforms. Educational reforms actually focus on accountability. A positive educational development and reform is very challenging and needs more effort and strategy on how to use and utilize the resources effectively as such it can achie...
发表评论
阅读全文