跳至主要内容

Influence of Equal Channel Angular Pressing on Tribological Properties of Low Carbon Steel (Fe-0,09C-0,64Si-,26Mn)

Read  full  paper  at:
http://www.scirp.org/journal/PaperInformation.aspx?PaperID=52938#.VKyorcnQrzE

ABSTRACT
This paper presents the results of equal channel angular pressing (ECAP) and subsequent heat treatment (HT) as a method to improve the wear resistance of metallic materials in friction sliding. The effect of ECAP and HT on the microstructure and mechanical properties of low carbon steel is investigated in this work. The mechanisms of wear resistance of steel with ultrafine and nanostructures produced by equal-channel angular pressing is analyzed. The results show that ECAP at room temperature and annealing at 350°C and 450°C can be used as a technology of reducing wear in friction sliding.
 
Cite this paper
Mordovskoi, P. , Yakovleva, S. and Maharova, S. (2015) Influence of Equal Channel Angular Pressing on Tribological Properties of Low Carbon Steel (Fe-0,09C-0,64Si-,26Mn). Journal of Surface Engineered Materials and Advanced Technology, 5, 24-27. doi: 10.4236/jsemat.2015.51003.
 
References
[1]Valiev, R.Z. and Alexandrov, I.V. (2000) Nanostructured Materials Produced by Severe Plastic Deformation. Logos.
 
[2]Zha, M., Li, Y.-J., Mathiesen, R., Bjørge, R. and Roven, H.J. (2014) Microstructure, Hardness Evolution and Thermal Stability of Binary Al-7Mg Alloy Processed by ECAP with Intermediate Annealing. Transactions of Nonferrous Metals Society of China, 24, 2301-2306.
 
[3]Yu, X., Li, Y.L. and Li, L. (2014) Effect of Grain Refinement on Fracture Toughness and Fracture Mechanism in AZ31 Magnesium Alloy. Procedia Materials Science, 3, 1780-1785.
http://dx.doi.org/10.1016/j.mspro.2014.06.287
 
[4]Shaeri, M.H., Salehi, M.T., Seyyedein, S.H., Abutalebi, M.R. and Park, J.K. (2014) Microstructure and Mechanical Properties of Al-7075 Alloy Processed by Equal Channel Angular Pressing Combined with Aging Treatment. Materials & Design, 57, 250-257. http://dx.doi.org/10.1016/j.matdes.2014.01.008
 
[5]Yakovleva, S.P., Maharova, S.N. and Borisova, M.Z. (2009) The Formation of Nanoscale Structural Elements in Steel 09G2S at Low Temperature Annealing after Severe Plastic Deformation. Collection of Articles of the III International Conference “Deformation and Fracture of Materials and Nanomaterials”, Moscow, 2004, Vol. 1, 256-257.
 
[6]Yakovleva, S.P., Maharova, S.N., Mordovskoy, P.G., Borisova, M.Z. and Vinokurov G.G. (2011) Wear Resistance and Friction Surface of Alloy Steel with Different Grain Size. Metallurgy Engineering, 4, 26-29.   eww150107lx
标签：

评论

发表评论

此博客中的热门博文

A Comparison of Methods Used to Determine the Oleic/Linoleic Acid Ratio in Cultivated Peanut (Arachis hypogaea L.)

Cultivated peanut ( Arachis hypogaea L.) is an important oil and food crop. It is also a cheap source of protein, a good source of essential vitamins and minerals, and a component of many food products. The fatty acid composition of peanuts has become increasingly important with the realization that oleic acid content significantly affects the development of rancidity. And oil content of peanuts significantly affects flavor and shelf-life. Early generation screening of breeding lines for high oleic acid content greatly increases the efficiency of developing new peanut varieties. The objective of this study was to compare the accuracy of methods used to classify individual peanut seed as high oleic or not high oleic. Three hundred and seventy-four (374) seeds, spanning twenty-three (23) genotypes varying in oil composition (i.e. high oleic (H) or normal/not high oleic (NH) inclusive of all four peanut market-types (runner, Spanish, Valencia and Virginia), were individually tested ...
发表评论
阅读全文

Location Optimization of a Coal Power Plant to Balance Costs against Plant’s Emission Exposure

Fuel and its delivery cost comprise the biggest expense in coal power plant operations. Delivery of electricity from generation to consumers requires investment in power lines and transmission grids. Placing a coal power plant or multiple power plants near dense population centers can lower transmission costs. If a coalmine is nearby, transportation costs can also be reduced. However, emissions from coal plants play a key role in worsening health crises in many countries. And coal upon combustion produces CO 2 , SO 2 , NO x , CO, Metallic and Particle Matter (PM10 & PM2.5). The presence of these chemical compounds in the atmosphere in close vicinity to humans, livestock, and agriculture carries detrimental health consequences. The goal of the research was to develop a methodology to minimize the public’s exposure to harmful emissions from coal power plants while maintaining minimal operational costs related to electric distribution losses and coal logistics. The objective was...
发表评论
阅读全文

Evaluation of the Safety and Efficacy of Continuous Use of a Home-Use High-Frequency Facial Treatment Appliance

At present, many home-use beauty devices are available in the market. In particular, many products developed for facial treatment use light, e.g., a flash lamp or a light-emitting diode (LED). In this study, the safety of 4 weeks’ continuous use of NEWA TM , a high-frequency facial treatment appliance, every alternate day at home was verified, and its efficacy was evaluated in Japanese individuals with healthy skin aged 30 years or older who complained of sagging of the facial skin.  Transepidermal water loss (TEWL), melanin levels, erythema levels, sebum secretion levels, skin color changes and wrinkle improvement in the facial skin were measured before the appliance began to be used (study baseline), at 2 and 4 weeks after it had begun to be used, and at 2 weeks after completion of the 4-week treatment period (6 weeks from the study baseline). In addition, data obtained by subjective evaluation by the subjects themselves on a visual analog scale (VAS) were also analyzed. Fur...
发表评论
阅读全文