Preparation of Microcapsules Containing Erythritol with Interfacial Polycondensation Reaction by Using the (W/O) Emulsion
Read full paper at:
http://www.scirp.org/journal/PaperInformation.aspx?PaperID=52058#.VIEDGGfHRK0
http://www.scirp.org/journal/PaperInformation.aspx?PaperID=52058#.VIEDGGfHRK0
Author(s)
It was tried to microencapsulate erythritol as a
phase change material with the interfacial polycondensation reaction
method by using the (W/O) emulsion and to characterize the microcapsules
prepared. In the experiment, toluene diisocyanate, diphenyl methane
diisocyanate and hexamethylenediisocyanate were used to form the
polyurethane shell and the effects of them on the heat storage density
and the microencapsulation efficiency were investigated. Furthermore,
the effect of supercooling prevention agent on the phase change behavior
of erythritol was investigated. The microcapsules prepared with
toluendiisocyanate monomer showed the highest heat storage density and
the higher microencapsulation efficiency. Considerable supercooling
phenomenon in the microcapsule was observed and prevented to a certain
degree by addition of potassium dihydrogen phosphate and calcium sulfate
as the supercooling prevention agent.
KEYWORDS
Cite this paper
Hayashi, Y. , Fuchigami, K. , Taguchi, Y. and
Tanaka, M. (2014) Preparation of Microcapsules Containing Erythritol
with Interfacial Polycondensation Reaction by Using the (W/O) Emulsion. Journal of Encapsulation and Adsorption Sciences, 4, 132-141. doi: 10.4236/jeas.2014.44014.
| [1] | Kondo, T. and Tanaka, M. (1975) Microcapsules (Preparation, Properties, Application). Sankyo Shuppan, Tokyo. |
| [2] | Kondo, T. (1967) Saishin Maikurokapseruka Gijutsu (Microencapsulation Technique). TES, Tokyo. |
| [3] | Tanaka, M. (2008) Key Point of Preparation of Nano/Microcapsules. Techno System Publishing Co. Ltd., Tokyo. |
| [4] | Koishi, M., Eto, K. and Higure, H. (2005) (Preparation + Utilization) Microcapsules. Kogyo Chosakai, Tokyo. |
| [5] |
Yamagishi, Y., Sugeno, T.,
Takeuchi, H. and Pyatenko, A.T. (1998) Themal Characteristics of
Supercooles Phase Change Materials inside Microcapsules. Netsu Bussei,
12, 10-17. http://dx.doi.org/10.2963/jjtp.12.10 |
| [6] |
Yamagishi, Y., Sugeno, T.,
Takeuchi, H. and Pyatenko, A.T. (1998) Forced Convection Heat Transfer
with Microencapsulated Phase-Change-Material Slurries. Kagaku Kogaku
Ronbunshu, 24, 104-110. http://dx.doi.org/10.1252/kakoronbunshu.24.104 |
| [7] |
Yamagishi, Y., Takeuchi, H. and
Pyatenko, A.T. (1999) Pyatenko, Characteristics of Microencapsulated PCM
Slurry as a Heat-Transfer Fluid. AIChE Journal, 45, 696-707.
http://dx.doi.org/10.1002/aic.690450405 |
| [8] |
Cho, J.S., Kwon, A. and Cho,
C.G. (2002) Microencapsulation of Octadecane as a Phase-Change Material
by Interfacial Polymerization in an Emulsion System. Colloid and Polymer
Science, 280, 260-266. http://dx.doi.org/10.1007/s00396-001-0603-x |
| [9] |
Zhang, X.X., Tao, X., Yick, K.I.
and Wang, X.C. (2004) Structure and Thermal Stability of
Microencapsulated Phase-Change Materials. Colloid and Polymer Science,
282, 330-336. http://dx.doi.org/10.1007/s00396-003-0925-y |
| [10] |
Su, J., Ren, L. and Wang, L.
(2005) Preparation and Mechanical Properties of Thermal Energy Storage
Microcapsules. Colloid and Polymer Science, 284, 224-228.
http://dx.doi.org/10.1007/s00396-005-1368-4 |
| [11] |
Zhaoa, C.Y. and Zhang G.H.
(2011) Review on Microencapsulated Phase Change Materials (MEPCMs):
Fabrication, Characterization and Applications. Renewable and
Sustainable Energy Reviews, 15, 3813-3832. http://dx.doi.org/10.1016/j.rser.2011.07.019 |
| [12] |
Kumar, R., Misra, M.K., Kumar,
R., Gupta, D., Khatri, P.K., Tak, B.B. and Meena, S.R. (2011) Phase
Change Materials: Technology Status and Potential Defence Applications.
Defence Science Journal, 6, 576-582. http://dx.doi.org/10.14429/dsj.61.363 |
| [13] |
Fortuniak, W., Slomkowski, S.,
Chojnowski, J., Kurjata, J., Tracz, A. and Mizerskas, U. (2013)
Synthesis of a Paraffin Phase Change Material Microencapsulated in a
Siloxane Polymer. Colloid and Polymer Science, 291, 725-733. http://dx.doi.org/10.1007/s00396-012-2782-z |
| [14] |
Tang, X., Li, W., Shi, H., Wang,
X., Wang, J. and Zhang, X. (2013) Fabrication, Characterization, and
Supercooling Suppression of Nanoencapsulated n-Octadecane with Methyl
Methacrylate-Octadecyl Methacrylate Copolymer Shell. Colloid and Polymer
Science, 291, 1705-1712. http://dx.doi.org/10.1007/s00396-013-2905-1 |
| [15] |
Cheng, F., Wei, Y., Zhang, Y.,
Wang, F., Shen, T. and Zong, C. (2013) Preparation and Characterization
of Phase-Change Material Nanocapsules with Amphiphilic Polyurethane
Synthesized by 3-Allyloxy-1,2-propanediol. Journal of Applied Polymer
Science, 130, 1879-1889.
http://dx.doi.org/10.1002/app.39302 |
| [16] |
Wang, T., Huang, J., Zhu, P. and
Xiao, J. (2013) Fabrication and Characterization of Micro-Encapsulated
Sodium Phosphate Dodecahydrate with Different Crosslinked Polymer
Shells. Colloid and Polymer Science, 291, 2463-2468. http://dx.doi.org/10.1007/s00396-013-2973-2 |
| [17] |
Shi, Y., Wu, Y., Zhu, L.,
Shentu, B. and Weng, Z. (2015) Preparation and Properties of
Phase-Change Heat-Storage UV Curable Polyurethane Acrylate Coating.
Journal of Applied Polymer Science, 132, 41266. http://dx.doi.org/10.1002/app.41266 |
| [18] |
Stritih, U. and Novak, P. (1996)
Solar Heat Storage Wall for Building Ventilation. Renewable Energy, 8,
268-271. http://dx.doi.org/10.1016/0960-1481(96)88860-4 |
| [19] |
Tyagi, V.V. and Buddhi, D.
(2008) Thermal Cycle Testing of Calcium Chloride Hexahydrate as a
Possible PCM for Latent Heat Storage. Solar Energy Materials & Solar
Cells, 92, 891-899. http://dx.doi.org/10.1016/j.solmat.2008.02.021 |
| [20] |
Wang, T., Huang, J., Zhu, P. and
Xiao, J. (2013) Fabrication and Characterization of Micro-Encapsulated
Sodium Phosphate Dodecahydrate with Different Crosslinked Polymer
Shells. Colloid and Polymer Science, 291, 2463-2468. http://dx.doi.org/10.1007/s00396-013-2973-2 |
| [21] |
O’shima, E. and Tanaka, M.
(1982) Coalescence and Breakup of Droplets in Suspension Polymerization
of Styrene. Kagaku Kogaku Ronbunshu, 8, 86-90. http://dx.doi.org/10.1252/kakoronbunshu.8.86 |
| [22] |
Hosogai, K. and Tanaka, M.
(1992) Effect of Impeller Diameter on Mean Droplet Diameter in Circular
Loop Reactor. The Canadian Journal of Chemical Engineering, 70, 645-653.
http://dx.doi.org/10.1002/cjce.5450700405 eww141205lx |
评论
发表评论