跳至主要内容

Preparation of MgAl LDHs Intercalated with Amines and Effect on Thermal Behavior for Poly(vinyl chloride)

Read full paper at:
http://www.scirp.org/journal/PaperInformation.aspx?PaperID=52192#.VIj-cMnQrzE

MgAl LDHs intercalated with CO(NH2)2, NH4Cl and NH3·H2O were prepared by co-precipitation and XRD, FT-IR, TGA-DTA and SEM techniques were employed for characterization. The results indicated that the layer-layer spacing of LDHs was enlarged by 0.169, 0.285 and 0.227 Å with the intercalation of CO(NH2)2, NH+4 and NH3, separately. The effects on thermal stability and degradation behavior of synthesized LDHs where mole ratios of Mg/Al/urea = 3:1:1, Mg/Al/NH4Cl = 3:1:1.5 and Mg/Al/NH3·H2O = 3:1:0.5 were investigated by Congo Red Method and thermogravimetric analysis (TGA) from 25°C - 800°C under N2. The TGA and DTA results showed, by incorporating 5% MgAl-CO(NH2)2 LDH, the dehydrochlorination temperature of PVC composites is 12°C higher than MgAl-NH+4 and MgAl-NH3 LDHs. MgAl-NH3 LDH enhances the ending temperature of the first degradation stage of PVC composites by 8°C compared with MgAl LDH. The LDH intercalated with CO(NH2)2 is proved to be an effective thermal stabilizer for PVC processing.
Cite this paper
Xue, X. and Zhang, H. (2014) Preparation of MgAl LDHs Intercalated with Amines and Effect on Thermal Behavior for Poly(vinyl chloride). Advances in Materials Physics and Chemistry, 4, 258-266. doi: 10.4236/ampc.2014.412028. 
 

[1] Zhu, H., Wang, W.S. and Liu, T.X. (2011) Effects of Copper-Containing Layered Double Hydrotalcite on Thermal and Smoke Behavior of Poly(vinyl chloride). Journal of Applied Polymer Science, 122, 273-281.
http://dx.doi.org/10.1002/app.34027
[2] Dietrich, B. (2002) Design of Anion Receptors: Applications. Pure and Applied Chemistry, 85, l457-1464.
[3] Cavani, F., Trifiro, F. and Vaccari, A. (1991) Hydrotalcite-Type Anionic Clays Preparation, Properties and Applications. Catalysis Today, 11, 173-301.
http://dx.doi.org/10.1016/0920-5861(91)80068-K
[4] Niu, X.N., Zhao, Y. and Zhu, H.T. (2010) Mg-Al-Fe Hydrotalcite Its Calcined Product Research on Reactive Red X-3B Decolorization Performance. Water Treatment Technology, 36, 35-40.
[5] Goh, K.-H., Lim, T.-T. and Dung, Z.L. (2008) Application of Layered Double Hydroxidesfor Removal of Oxyanions: A Review. Water Research, 42, 1343-1368.
[6] Li, K.R., Gu, X.Q., Hao, D.B., et al. (2010) Synthesis, Characterization and Catalytic Acetone Hydrotalcite Condensation Performance. Molecular Catalysis, 4, 309-314.
[7] Wu, N. (2010) Hydrotalcite Compound Applications in Catalysis Field. Industrial Catalysis, 18, 28-31.
[8] Liu, J., Chen, G.M. and Yang, J.P. (2008) Preparation and Characterization of Poly(vinyl chloride)/Layered Double Hydroxide Nano-Composites with Enhanced Thermal Stability. Polymer, 49, 3923-3927.
http://dx.doi.org/10.1016/j.polymer.2008.07.014
[9] Lin, Y.J., Wang, J.R., Evans, D.G., et al. (2006) Layered and Intercalated Hydrotalcite-Like Materials as Thermal Stabilizers in PVC Resin. Journal of Physics and Chemistry of Solids, 67, 998-1001.
[10] Yan, H.B., Li, M., Liu, Q.F., et al. (2009) Hydrotalcite/Ca-Zn Composite Heat Stabilizer for PVC Heat Stability. Polymer Materials Science and Engineering, 25, 75-77.
[11] Nyambo, C., Chen, D., Su, S.P. and Wilkie, C.A. (2009) Does Organic Modification of Layered Double Hydroxides Improve the Fire Performance of PMMA. Polymer Degradation and Stability, 94, 1298-1306.
http://dx.doi.org/10.1016/j.polymdegradstab.2009.03.023
[12] Yang, Z.H., Chi, W.W., et al. (2008) Synthesis and Application of Mg-Al-Ca Ternary Hydrotalcite in PVC. Plastics Additives, 2008, 18-21.
[13] Li, L., Mo, D. and Luo, Q.S. (2004) Reconstruction and Characterization of Zn, Al Hydrotalcite Like Compound. Chinese Journal of Inorganic Chemistry, 20, 256-260.
[14] Abdel-Naby, A.S., Al-Ghamdi, R.F. and Al-Ghamdi, A.A. (2010) Effect of Cyanoguanidine-Metal and Urea-Metal Complexes on the Thermal Degradation of Poly(vinyl chloride). Journal of Vinyl and Additive Technology, 16, 15-22.
http://dx.doi.org/10.1002/vnl.20225
[15] Xu, X.P., Chen, S., Tang, W., Qu, Y.J. and Wang, X. (2013) Synthesis and Application of Uracil Derivatives as Novel Thermal Stabilizers for Rigid Poly(vinyl chloride). Polymer Degradation and Stability, 98, 659-665.
http://dx.doi.org/10.1016/j.polymdegradstab.2012.11.008
[16] Wang, G.L., Yang, M., Li, Z.W., Lin, K.F., Jin, Q., Xing, C.J., Hu, Z.D. and Wang, D. (2013) Synthesis and Characterization of Zn-Doped MgAl-Layered Double Hydroxide Nanoparticles as PVC Heat Stabilizer. Journal of Nanoparticle Research, 15, 1882-1890.
http://dx.doi.org/10.1007/s11051-013-1882-0
[17] Lin, Y.J., Li, D.Q., Evans, D.G. and Duan, X. (2005) Modulating Effect of Mg-Al-CO3 Layered Double Hydroxides on the Thermal Stability of PVC Resin. Polymer Degradation and Stability, 88, 286-293.
http://dx.doi.org/10.1016/j.polymdegradstab.2004.11.007
[18] Lin, Y.J., Wang, J.R., Evans, D.G. and Li, D.Q. (2006) Layered and Intercalated Hydrotalcite-Like Materials as Thermal Stabilizers in PVC Resin. Journal of Physics and Chemistry of Solids, 67, 998-1001.
http://dx.doi.org/10.1016/j.jpcs.2006.01.016
[19] Ren, L.L., He, J. and Duan, X. (2001) Intercalation Assembled Anionic Pillared Materials. Chemical Bulletin, 64, 686-691.
[20] Costantino, U., Marmottini, F., Nocchetti, M. and Vivani, R. (1998) New Synthetic Routes to Hydrotalcite-Like Compounds—Characterization and Properties of the Obtained Materials. European Journal of Inorganic Chemistry, 10, 1439-1446.
http://dx.doi.org/10.1002/(SICI)1099-0682(199810)1998:10<1439::AID-EJIC1439>3.0.CO;2-1
[21] Kannan, S. and Swamy, C.S. (1992) Synthesis and Physicochemical Characterization of Cobalt Aluminum Hydrotalcite. Journal of Materials Science Letters, 11, 1585-1587.
[22] Xie, X.M., Yan, K., Hu, Q.X., Song, J.L. and Wang, Z.Z. (2008) Preparation and Catalytic Application of Copper-Containing Hydrotalcite-Like Compounds. Chinese Journal of Inorganic Chemistry, 24, 32-36.
[23] Purmova, J., Pauwels, K.F.D., van Zoelen, W., Vorenkamp, E.J. and Schouten, A.J. (2005) New Insight into the Formation of Structural Defects in Poly(vinyl chloride). Macromolecules, 38, 6352-6366.
http://dx.doi.org/10.1021/ma050035p
[24] Yurco, M., Bagnasco, G., Costantino, U., Marmottini, F., Montanari, T., Ramis, G. and Busca, G. (2004) Production of Hydrogen from Oxidative Steam Reforming of Methanol: I. Preparation and Characterization of Cu/ZnO/Al2O3 Catalysts from a Hydrotalcite-Like LDH Precursor. Journal of Catalysis, 228, 43-55. 
http://dx.doi.org/10.1016/S0021-9517(04)00412-9            eww141211lx
标签：

评论

发表评论

此博客中的热门博文

A Comparison of Methods Used to Determine the Oleic/Linoleic Acid Ratio in Cultivated Peanut (Arachis hypogaea L.)

Cultivated peanut ( Arachis hypogaea L.) is an important oil and food crop. It is also a cheap source of protein, a good source of essential vitamins and minerals, and a component of many food products. The fatty acid composition of peanuts has become increasingly important with the realization that oleic acid content significantly affects the development of rancidity. And oil content of peanuts significantly affects flavor and shelf-life. Early generation screening of breeding lines for high oleic acid content greatly increases the efficiency of developing new peanut varieties. The objective of this study was to compare the accuracy of methods used to classify individual peanut seed as high oleic or not high oleic. Three hundred and seventy-four (374) seeds, spanning twenty-three (23) genotypes varying in oil composition (i.e. high oleic (H) or normal/not high oleic (NH) inclusive of all four peanut market-types (runner, Spanish, Valencia and Virginia), were individually tested ...
发表评论
阅读全文

Location Optimization of a Coal Power Plant to Balance Costs against Plant’s Emission Exposure

Fuel and its delivery cost comprise the biggest expense in coal power plant operations. Delivery of electricity from generation to consumers requires investment in power lines and transmission grids. Placing a coal power plant or multiple power plants near dense population centers can lower transmission costs. If a coalmine is nearby, transportation costs can also be reduced. However, emissions from coal plants play a key role in worsening health crises in many countries. And coal upon combustion produces CO 2 , SO 2 , NO x , CO, Metallic and Particle Matter (PM10 & PM2.5). The presence of these chemical compounds in the atmosphere in close vicinity to humans, livestock, and agriculture carries detrimental health consequences. The goal of the research was to develop a methodology to minimize the public’s exposure to harmful emissions from coal power plants while maintaining minimal operational costs related to electric distribution losses and coal logistics. The objective was...
发表评论
阅读全文

Evaluation of the Safety and Efficacy of Continuous Use of a Home-Use High-Frequency Facial Treatment Appliance

At present, many home-use beauty devices are available in the market. In particular, many products developed for facial treatment use light, e.g., a flash lamp or a light-emitting diode (LED). In this study, the safety of 4 weeks’ continuous use of NEWA TM , a high-frequency facial treatment appliance, every alternate day at home was verified, and its efficacy was evaluated in Japanese individuals with healthy skin aged 30 years or older who complained of sagging of the facial skin.  Transepidermal water loss (TEWL), melanin levels, erythema levels, sebum secretion levels, skin color changes and wrinkle improvement in the facial skin were measured before the appliance began to be used (study baseline), at 2 and 4 weeks after it had begun to be used, and at 2 weeks after completion of the 4-week treatment period (6 weeks from the study baseline). In addition, data obtained by subjective evaluation by the subjects themselves on a visual analog scale (VAS) were also analyzed. Fur...
发表评论
阅读全文