跳至主要内容

Obtaining of Nanocomposites in SiC-SiAlON and Al2O3-SiAlON System by Alumothermal Processes

Read full paper at:
http://www.scirp.org/journal/PaperInformation.aspx?PaperID=52085#.VIpmfsnQrzE

Composites were obtained in the in SiC-SiAlON and Al2O3-SiAlON system. Physical-chemical processes going on at the obtaining of SiALON within the range of 800°C - 1500°C were studied. Charge compositions and sintering regime were selected. It was proved that X-SiALON was obtained at the sintering of kaolin-aluminum powder at 1500°C, while β-SiALON was formed at the sintering of SiC-Aluminum powder, silicium and Al2O3-aluminum powder, silicium at 1500°C. Corrosion properties of the materials were studied. Investigations were performed by the methods of X-Ray structural and microscopical analysis.
Cite this paper
Kovziridze, Z. , Nizharadze, N. , Tabatadze, G. , Cheishvili, T. , Mestvirishvili, Z. , Nikoleishvili, E. , Mshvildadze, M. and Darakhvelidze, N. (2014) Obtaining of Nanocomposites in SiC-SiAlON and Al2O3-SiAlON System by Alumothermal Processes. Journal of Electronics Cooling and Thermal Control, 4, 105-117. doi: 10.4236/jectc.2014.44012. 
 

[1] Gusman, I.Y., Тumakova, E.I. and Fedotov, A.V. (1970) Correlative Studies of Some Properties of Materials Based on Composites SiC+Si3N4 and SiC-Si2N2. Refractroies, 3, 44-48.
[2] Kilian, M.F. (1987) Produktionsverfahren, Anwendungseigenschaften und Einsatzmoegichkeiten von Nitridkeramik insbesondere von Siliciumniеtrid. Vortragsvero ff. Haus Techn., Essen, 519, 19-21.
[3] Wang, L., He, C., Wu, J. Oxidation of Sintered Silicon Nitride Materials. Ceram. Mater and Comp. Engin. Proc. Jnt. Simp. Las Vegas, 27-30 November 1988, Westerville, Ohio, 1989, 604-611.
[4] Belij, Ya.I., Lomda, V.V., Svistun, V.M. and Polezhai, S.G.( 1990) For the Issue of Obtaining Composite Materials Based on Silicium Nitride. Moscow International Conference, Abstracts of Reports, Part 2, 174.
[5] Zheng, G.M., Zhao, J., Gao, Z.J. and Cao, Q.Y. (2012) Cutting Performance and Wear Mechanisms at Sialon-Si3N4 Graded Nano-Composite Ceramic Cutting Tools. The International Journal of advanced Manufacturing Technology, 58, 19-28.
[6] Riley, F.L. (2000) Silicon Nitride and Related Materials. Journal of the American Ceramic Society, 83, 10-30.
[7] Luthra, K.L. (1991) A Mixed Interface Reaction/Diffusion Control Method for Oxidation of Silicon Nitride. Journal of the Electrochemical Society, 138, 3001-3007.
http://dx.doi.org/10.1149/1.2085355
[8] Ogbuji, L.U.J.T. (1992) Role of Si2N2O in the Passive Oxidation of Chemically-Vapor-Deposited Si3N4. Journal of the American Ceramic Society, 75, 2995-3000.
http://dx.doi.org/10.1111/j.1151-2916.1992.tb04377.x
[9] Kawai, C. and Yamakawa, A. (1997) Effect of Porosity and Microstructure on the Strength of Si3N4: Designed Microstructure for High Strength, High Thermal Shock Resistance, and Facile Machining. Journal of the American Ceramic Society, 80, 2705-2708.
http://dx.doi.org/10.1111/j.1151-2916.1997.tb03179.x
[10] Cerenius, Y. (1999) Melting Temperature Measurements on α-Silicon Nitride to a Pressure of 37 GPa. Journal of the American Ceramic Society, 82, 380-386.
http://dx.doi.org/10.1111/j.1551-2916.1999.tb20073.x
[11] Chukholina, L.N. (2012) Method for Obtaining Sialon Powder.
http://bd.patent.su/2378000
[12] Http://www.ceramtec.com.ua/ceramic-materials/sialon
[13] Borovinskaya, I.P. and Smirnov, K.L. (1998) Self-Spreading High Temperature Synthesis of Sialon Ceramics. Science for Industry, 8, 39-45.
[14] Boyarina, I.L., Puchkov, A.B., et al. (1981) Sialons, a New Refractory Material. Refractory, 12, 24-28.
[15] Van Landeghem, H.P., Goune, M., Redjamia, A. (2012) Investigation of a Ferrite/Silicon Nitride Composite Concept Aimed at Automotive Applications. Steel Research International, 83, 590-593.
http://dx.doi.org/10.1002/srin.201100264
[16] Rosenflanz, A. and Chen, I.-W. (1999) Phase Relationships and Stability of α-Sialon. Journal of the American Ceramic Society, 82, 1025-1036. http://dx.doi.org/10.1111/j.1151-2916.1999.tb01869.x
[17] Land, P.L., Wimmer, J.M., Burns, R.W and Choudhury, N.S. (1978) Compounds and Properties of the System Si-AL- O-N. Journal of the American Ceramic Society, 61, 50-60.
http://dx.doi.org/10.1111/j.1151-2916.1978.tb09230.x
[18] Ekström, T. and Nygren, M. (1992) Sialon Ceramics. Journal of the American Ceramic Society, 75, 259-276.
http://dx.doi.org/10.1111/j.1151-2916.1992.tb08175.x
[19] Schmucker, M. and Schneider, H. (1999) Transformation of X-Phase Sialon to Mullite. Journal of the American Ceramic Society, 82, 1934-1936.
http://dx.doi.org/10.1111/j.1151-2916.1999.tb02021.x
[20] Anya, C.C. and Hendry, A. (1994) Hardness, Indentation Fracture Toughness and Compositional Formula of X-Phase Sialon. Journal of Materials Science, 29, 527-533.
http://dx.doi.org/10.1007/BF01162517
[21] Ekström, T. and Olsson, P.O. (1989) Beta-Sialon Ceramics Prepared at 1700 °C by Hot Isostatic Pressing. Journal of the American Ceramic Society, 72, 1722-1724.
http://dx.doi.org/10.1111/j.1151-2916.1989.tb06311.x
[22] Ekström, T., Käll, P.O., Nygren, M. and Olsson, P.O. (1989) Dense Single-Phase Beta-Sialon Ceramics by Glass-En- capsulated Hot Isostatic Pressing. Journal of Materials Science, 24, 1853-1861.
http://dx.doi.org/10.1007/BF01105715
[23] Kishi, K., Umebayashi, S. and Tani, E. (1990) Influence of Microstructure on Strength and Fracture Toughness of Beta-Sialon. Journal of Materials Science, 25, 2780-2784.
http://dx.doi.org/10.1007/BF00584879
[24] Piekarczyk, J., Lis, J. and Bialoskorski, J. (1990) Elastic Properties, Hardness, and Indentation Fracture Toughness of Beta-Sialons. Key Engineering Materials, 89-91, 542-546.
[25] Jiang, X., Baek, Y.K., Lee, S.M. and Kang, S.J.L. (1998) Formation of an α-Sialon Layer on β-Sialon and Its Effect on Mechanical Properties. Journal of the American Ceramic Society, 81, 1907-1912.
http://dx.doi.org/10.1111/j.1151-2916.1998.tb02565.x           eww141212lx
标签：

评论

发表评论

此博客中的热门博文

Does Immigration Promote the Investment of the Monopolistic Firm?

In the present paper, we examine the effect of increasing uncertainty of immigrants’ growth on the optimal timing of investment of a firm that has a monopolistic power over the labor market. It is revealed that when the uncertainty of immigrants’ growth is more than a threshold level, increasing uncertainty of immigrants’ growth accelerates the optimal timing of firms’ investment and enhances the economic growth, even if the uncertainty of immigrants’ growth is formulated by the geometric Brownian motion, which is in sharp contrast to the standard result that an increase in the uncertainty postpones the optimal timing. With an increase in the immigrants over the past ten years, workforces in the host countries have been growing significantly to the extent that the immigrants represent 70% of the increase in the workforce in Europe, and 47% in the United States as OECD indicates. In the present paper, we attempted to investigate the effect of increased uncertainty caused by the growi...
发表评论
阅读全文

Education Policy Implementation: A Mechanism for Enhancing Primary Education Development in Zanzibar

Education is one of the fundamental rights of individuals; therefore, the government of a country needs to develop and strengthen educational policy and quality as well as to ensure that everyone has equal access to basic education. The improvement of access and quality of education in the world is becoming as an essential factor in development, whereas the basic education (primary school), is acknowledged as a foundation of the higher educational development for every country. To fulfill this goal, governments introduce several policies and procedures; however, it requires some reforms and participation from the politician, policymakers, and other stakeholders to re-examine educational policy so that it can lead to multiplication and betterment of the reforms. Educational reforms actually focus on accountability. A positive educational development and reform is very challenging and needs more effort and strategy on how to use and utilize the resources effectively as such it can achie...
发表评论
阅读全文