跳至主要内容

Experimental Investigation of Intake Diesel Aerosol Fuel Homogeneous Charge Compression Ignition (HCCI) Engine Combustion and Emissions

Read full paper at:
http://www.scirp.org/journal/PaperInformation.aspx?PaperID=52258#.VI5JlMnQrzE

Author(s)
External mixture formation (PFI) of a diesel fuel aerosol has employed to investigate the diesel HCCI engine combustion and emissions characteristics. The key to the external mixture formation with diesel fuel is the proper fuel/air mixture preparation. A proposed intake diesel fuel aerosol system mainly consists of a small chamber, in which the diesel fuel is fully vaporized by means of fuel cavitation inside the diesel injector nozzle. Nozzle cavitation is mainly affected by the injection pressure and the fuel system temperature. Results obtained reveal that the proposed method determines the possibility of producing a complete homogeneous fuel/air mixture, which can be applied to the diesel HCCI engine. With this method, the combustion and emission behavior were entirely optimized and the engine is capable of running in HCCI combustion mode with nearly ideal mixture preparation. In the present investigation, a methodology for the HCCI combustion mode of the diesel aerosol/air mixtures based on the fuel cavitation inside the injector nozzle parameters (such as the injection pressure and the fuel system temperature where fuel premixed ratio, NOx, CO, CO2, and HC emissions) have analyzed. Based on the engine performance and emissions characteristics the fuel injection pressure and the fuel system temperature have optimized to produce a suitable fuel premixed ratio and the perfect fuel/air mixture homogeneity at different engine operating conditions. The optimal injection pressure ranges between 150 - 200 bars, while the fuel system temperature lies within 175℃ - 200℃. Loops of exhaust gas recirculation (EGR) are used to extend the engine load by controlling the combustion phasing.
Cite this paper
Elkelawy, M. (2014) Experimental Investigation of Intake Diesel Aerosol Fuel Homogeneous Charge Compression Ignition (HCCI) Engine Combustion and Emissions. Energy and Power Engineering, 6, 513-526. doi: 10.4236/epe.2014.614045. 
 

[1] Elkelawy, M., Yu-Sheng, Z., Alm El-Din, H. and Yu, J.-Z. (2008) Challenging and Future of Homogeneous Charge Compression Ignition Engines; an Advanced and Novel Concepts Review. Journal of Power and Energy Systems, 2, 1108-1119.
http://dx.doi.org/10.1299/jpes.2.1108
[2] Yao, M., Zheng, Z. and Liu, H. (2009) Progress and Recent Trends in Homogeneous Charge Compression Ignition (HCCI) Engines. Progress in Energy and Combustion Science, 35, 398-437.
http://dx.doi.org/10.1016/j.pecs.2009.05.001
[3] Komninos, N.P. and Rakopoulos, C.D. (2012) Modeling HCCI Combustion of Biofuels: A Review. Renewable and Sustainable Energy Reviews, 16, 1588-1610.
http://dx.doi.org/10.1016/j.rser.2011.11.026
[4] Bendu, H. and Murugan, S. (2014) Homogeneous Charge Compression Ignition (HCCI) Combustion: Mixture Preparation and Control Strategies in Diesel Engines. Renewable and Sustainable Energy Reviews, 38, 732-746.
http://dx.doi.org/10.1016/j.rser.2014.07.019
[5] Elkelawy, M., Zhang, Y.-S., Alm El-Din, H. and Yu, J.-Z. (2008) Detailed Simulation of Liquid DME Homogenization and Combustion Behaviors in HCCI Engines. SAE Technical Paper 2008-01-1705.
http://dx.doi.org/10.4271/2008-01-1705
[6] Ganesh, D. and Nagarajan, G. (2010) Homogeneous Charge Compression Ignition (HCCI) Combustion of Diesel Fuel with External Mixture Formation. Energy, 35, 148-157.
http://dx.doi.org/10.1016/j.energy.2009.09.005
[7] Gan, S., Ng, H.K. and Pang, K.M. (2011) Homogeneous Charge Compression Ignition (HCCI) Combustion: Implementation and Effects on Pollutants in Direct Injection Diesel Engines. Applied Energy, 88, 559-567.
http://dx.doi.org/10.1016/j.apenergy.2010.09.005
[8] Oliveira Pan?o, M.R., Moreira, A.L.N. and Dur?o, D.F.G. (2013) Effect of a Cross-Flow on Spray Impingement with Port Fuel Injection Systems for HCCI Engines. Fuel, 106, 249-257.
http://dx.doi.org/10.1016/j.fuel.2012.11.039
[9] Yu, J.-Z., Zhang, Y.-S., Elkelawy, M. and Kui, Q. (2010) Spray and Combustion Characteristics of HCCI Engine Using DME/ Diesel Blended Fuel by Port-Injection, SAE Technical Paper 2010-01-1485.
http://dx.doi.org/10.4271/2010-01-1485
[10] Singh, A.P. and Agarwal, A.K. (2012) Combustion Characteristics of Diesel HCCI Engine: An Experimental Investigation Using External Mixture Formation Technique. Applied Energy, 99, 116-125.
http://dx.doi.org/10.1016/j.apenergy.2012.03.060
[11] Kim, M.Y. and Lee, C.S. (2007) Effect of a Narrow Fuel Spray Angle and a Dual Injection Configuration on the Improvement of Exhaust Emissions in a HCCI Diesel Engine. Fuel, 86, 2871-2880.
http://dx.doi.org/10.1016/j.fuel.2007.03.016
[12] Ryu, J., Kim, H. and Lee, K. (2005) A Study on the Spray Structure and Evaporation Characteristic of Common Rail Type High Pressure Injector in Homogeneous Charge Compression Ignition Engine. Fuel, 84, 2341-2350.
http://dx.doi.org/10.1016/j.fuel.2005.03.032
[13] Elkelawy, M., Zhang, Y.-S., Alm El-Din, H., Yu, J.-Z., El Zahaby, A., El Shenawy, E., et al. (2009) Experimental Study on Flash Boiling and Micro-Explosion of Emulsified Diesel Fuel Spray Droplets by Shadowgraph Technology. Transactions of CSICE, 27, 306-308.
[14] Leng, X., Feng, L., Tian, J., Du, B., Long, W. and Tian, H. (2010) A Study of the Mixture Formation Process for a Third-Generation Conical Spray Applied in HCCI Diesel Combustion. Fuel, 89, 392-398.
http://dx.doi.org/10.1016/j.fuel.2009.08.021
[15] Turkcan, A., Ozsezen, A.N. and Canakci, M. (2014) Experimental Investigation of the Effects of Different Injection Parameters on a Direct Injection HCCI Engine Fueled with Alcohol-Gasoline Fuel Blends. Fuel Processing Technology, 126, 487-496.
http://dx.doi.org/10.1016/j.fuproc.2014.05.023
[16] Coskun, G., Soyhan, H.S., Demir, U., Turkcan, A., Ozsezen, A.N. and Canakci, M. (2014) Influences of Second Injection Variations on Combustion and Emissions of an HCCI-DI Engine: Experiments and CFD Modelling. Fuel, 136, 287-294.
http://dx.doi.org/10.1016/j.fuel.2014.07.042
[17] Wu, Z., Bao, T., Zhang, Q., Yan, S. and Deng, J. (2014) Experimental Study on Spray Combustion Characteristics of Gasoline-Diesel Blended Fuel in a Controllable Active Thermo-Atmosphere. Fuel, 135, 374-379.
http://dx.doi.org/10.1016/j.fuel.2014.06.073
[18] Hairuddin, A.A., Yusaf, T. and Wandel, A.P. (2014) A Review of Hydrogen and Natural Gas Addition in Diesel HCCI Engines. Renewable and Sustainable Energy Reviews, 32, 739-761.
http://dx.doi.org/10.1016/j.rser.2014.01.018
[19] Deshmukh, B.S., Babu, M.K.G., Kumar, M.N., Das, L.M. and Aghav, Y. (2012) Simulation Approach for Quantifying the Homogeneity of In-Cylinder Mixture Formation for Port Injected Diesel Fuel for PCCI/HCCI. International Journal of Scientific & Engineering Research, 3.
[20] Spindt, R.S. (1965) Air-Fuel Ratios from Exhaust Gas Analysis. SAE Technical Paper 650507.
http://dx.doi.org/10.4271/650507
[21] Bresenham, D., Reisel, J. and Neusen, K. (1998) Spindt Air-Fuel Ratio Method Generalization for Oxygenated Fuels. SAE Technical Paper 982054.
http://dx.doi.org/10.4271/982054
[22] Lynch, D. and Smith, W.J. (1997) Comparison of AFR Calculation Methods Using Gas Analysis and Mass Flow Measurement. SAE Technical Paper 971013.
http://dx.doi.org/10.4271/971013
[23] El-Din, H.A., Zhang, Y.S. and Elkelawy, M. (2012) A Computational Study of Cavitation Model Validity Using a New Quantitative Criterion. Chinese Physics Letters, 29, Article ID: 064703.
http://dx.doi.org/10.1088/0256-307X/29/6/064703
[24] Bastawissi, H. and Elkelawy, M. (2012) Computational Evaluation of Nozzle Flow and Cavitation Characteristics in a Diesel Injector. SAE Technical Paper 2012-01-1652.
http://dx.doi.org/10.4271/2012-01-1652
[25] Heywood, J. (1988) Internal Combustion Engine Fundamentals. McGraw-Hill Book Company, New York.                                       eww141215lx
标签：

评论

发表评论

此博客中的热门博文