跳至主要内容

Experimental Assessment of the Battery Lifetime in WSN Based on the Duty-Cycle Current Average Method

Read full paper at:
http://www.scirp.org/journal/PaperInformation.aspx?PaperID=51140#.VFbcJ2fHRK0

A great amount of work addressed methods for predicting the battery lifetime in wireless sensor systems. In spite of these efforts, the reported experimental results demonstrate that the duty-cycle current average method, which is widely used to this aim, fails in accurately estimating the battery life time of most of the presented wireless sensor system applications. The aim of this paper is to experimentally assess the duty-cycle current average method in order to give more effective insight on the effectiveness of the method. An electronic metering system, based on a dedicated PCB, has been designed and developed to experimentally measure node current consumption profiles and charge extracted from the battery in two selected case studies. A battery lifetime measurement (during 30 days) has been carried out. Experimental results have been assessed and compared with estimations given by using the duty-cycle current average method. Based on the measurement results, we show that the assumptions on which the method is based do not hold in real operating cases. The rationality of the duty-cycle current average method needs reconsidering.
Cite this paper
Barboni, L. and Valle, M. (2014) Experimental Assessment of the Battery Lifetime in WSN Based on the Duty-Cycle Current Average Method. Wireless Sensor Network, 6, 212-220. doi: 10.4236/wsn.2014.610021
 

[1] Lu, B. and Gungor, V.C. (2009) Online and Remote Motor Energy Monitoring and Fault Diagnostics Using Wireless Sensor Networks. IEEE Transactions on Industrial Electronics, 56, 4651-4659.
http://dx.doi.org/10.1109/TIE.2009.2028349
[2] Gungor, V.C. and Gerhard, P.H. (2009) Industrial Wireless Sensor Networks: Challenges, Design Principles, and Technical Approaches. IEEE Transactions on Industrial Electronics, 56, 4258-4265.
http://dx.doi.org/10.1109/TIE.2009.2015754
[3] Dondi, D., et al. (2008) Modeling and Optimization of a Solar Energy Harvester System for Self-Powered Wireless Sensor Networks. IEEE Transactions on Industrial Electronics, 55, 2759-2766.
http://dx.doi.org/10.1109/TIE.2008.924449
[4] Agha, K.A., et al. (2009) Which Wireless Technology for Industrial Wireless Sensor Networks? The Development of OCARI Technology. IEEE Transactions on Industrial Electronics, 56, 4266-4278.
http://dx.doi.org/10.1109/TIE.2009.2027253
[5] Ahn, H.-S. and Ko, K.H. (2009) Simple Pedestrian Localization Algorithms Based on Distributed Wireless Sensor Networks. IEEE Transactions on Industrial Electronics, 56, 4296.
http://dx.doi.org/10.1109/TIE.2009.2017097
[6] Pierce, F.J. and Elliott, T.V. (2008) Regional and On-Farm Wireless Sensor Networks for Agricultural Systems in Eastern Washington. Computers and Electronics in Agriculture, 61, 32-43.
http://dx.doi.org/10.1016/j.compag.2007.05.007
[7] Lopez, J.A., et al. (2009) Development of a Sensor Node for Precision Horticulture. Sensors, 9, 3240-3255.
http://dx.doi.org/10.3390/s90503240
[8] Torvmark, K.H. Low Power Systems Using the CC1010. Chipcon Application Note AN017.
[9] Baleri, G. Guidelines for WSN Design and Deployment.
[10] The Battery Life Estimator. A Web-Based Calculator to Help Optimize Low-Power Applications.
http://www.silabs.com/support/pages/batterylifeestimator.aspx
[11] Yang, O. and Heinzelman, W.B. (2012) Modeling and Performance Analysis for Duty-Cycled MAC Protocols with Applications to S-MAC and X-MAC. IEEE Transactions on Mobile Computing, 11, 905-921.
http://dx.doi.org/10.1109/TMC.2011.121
[12] Jiang, X., Taneja, J., Ortiz, J., Tavakoli, A., Dutta, P., Jeong, J., et al. (2007) An Architecture for Energy Management in Wireless Sensor Networks. Special Issue on the Workshop on Wireless Sensor Network Architecture, 4, 31-36.
[13] Technical Data MPR-MIB Users Manual Revision B, June 2006 PN: 7430-0021-07. Technical Data MTS/MDA Sensor Board Users Manual Revision A, June 2007 PN: 7430-0020-05.
http://www.xbow.com/
[14] Gay, P., Welsh, M., Levis, P., Brewer, E., Von Behren, R. and Culler, D. (2003) The nesC Language: A Holistic Approach to Networked Embedded Systems. Proceedings of the ACM SIGPLAN 2003 Conference on Programming Language Design and Implementation, San Diego, 9-11 June 2003.
[15] http://tinyos.stanford.edu/tinyos-wiki/index.php/TinyOS_Documentation_Wiki
[16] MoteWork Crossbow—Platform for the Development of Wireless Sensor Network from Crossbow. www.willow.co.uk/MoteWorks_OEM_Edition.pdf
[17] CC2420 2.4 GHz IEEE 802.15.4 ZigBee-Ready RF Transceiver Chipcon, Product from Texas Instruments.
http://focus.ti.com/docs/prod/folders/print/cc2420.html
[18] Kan, B., Cai, L., Zhao, L. and Xu, Y. (2007) Energy Efficient Design of WSN Based on an Accurate Power Consumption Model. Proceedings of the Wireless Communications, Networking and Mobile Computing (WiCom 2007), Shanghai, 21-25 September 2007, 2751-2754.
[19] Barberis, A., Barboni, L. and Valle, M. (2007) Evaluating Energy Consumption in Wireless Sensor Networks Applications. Proceedings of the 10th Euromicro Conference on Digital System Design Architectures, Methods and Tools, Lubeck, 29-31 August 2007, 455-462.
http://dx.doi.org/10.1109/DSD.2007.4341509
[20] Holger, K. and Willig, A. (2005) Protocols and Architectures for Wireless Sensor Networks. John Wiley & Sons, Hoboken.
[21] Bougard, B., Daly, D.C., Chandrakasan, A. and Dehaene, W. (2005) Energy Efficiency of the IEEE 802.15.4 Standard in Dense Wireless Microsensor Networks: Modeling and Improvement Perspectives. Proceedings of the Conference on Design, Automation and Test, 1, 196-201.
[22] Rao, R., Vrudhula, S. and Rakhmatov, D. (2003) Battery Modeling for Energy-Aware System Design. IEEE Computer Society, 36, 77-87.
http://dx.doi.org/10.1145/860176.860179
[23] Rakhmatov, D. and Vrudhula, S. (2003) Energy Management for Battery-Powered Embedded Systems. ACM Transactions on Embedded Computing Systems, 2, 277-324.
http://dx.doi.org/10.1145/860176.860179
[24] Rao, R., Vrudhula, S. and Chang, N. (2005) Battery Optimization vs Energy Optimization: Which to Choose and When? Proceedings of Conference on Computer-Aided Design, ICCAD IEEE/ACM, San Jose, 6-10 November 2005, 439-445.
[25] Panigrahi, D., Chiasserini, C., Dey, S., Rao, R., Raghunathan, A. and Lahiri, K. (2001) Battery Life Estimation of Mobile Embedded Systems. Proceedings of 14th International Conference on VLSI Design (VLSID 01), Bangalore, 3-7 January 2001, 57-63.
[26] Expected Battery Life vs. System Current Usage and Duty Cycle, PowerManagement.xls. Excel Worksheet from Crossbow Technology.
http://www-db.ics.uci.edu/pages/research/quasar/PowerManagement.xls
[27] Kyaw, Z.T. and Sen, C. (2008) Using the CC2430 and TIMAC for Low-Power Wireless Sensor Applications: A Power Consumption Study.
http://focus.ti.com.cn/cn/lit/an/slyt295/slyt295.pdf
[28] Application Note AN053 Measuring Power Consumption with CC2430 and Z-Stack.
http://focus.ti.com/lit/an/swra144/swra144.pdf
[29] Product Datasheet Energizer E91, Alkaline Battery AA. Energizer Holdings, Inc. Form No. EBC-1202M.
http://www.energizer.com/
[30] High-Side Measurement Current Shut Monitor INA 139, Datasheet Burr-Brown Products from Texas Instruments.
http://focus.ti.com/
[31] Coulomb Counter—Battery Gas Gauge LTC4150. Linear Technologies IC Product.
http://www.linear.com/                         eww141103lx

评论

此博客中的热门博文

Does Immigration Promote the Investment of the Monopolistic Firm?

In the present paper, we examine the effect of increasing uncertainty of immigrants’ growth on the optimal timing of investment of a firm that has a monopolistic power over the labor market. It is revealed that when the uncertainty of immigrants’ growth is more than a threshold level, increasing uncertainty of immigrants’ growth accelerates the optimal timing of firms’ investment and enhances the economic growth, even if the uncertainty of immigrants’ growth is formulated by the geometric Brownian motion, which is in sharp contrast to the standard result that an increase in the uncertainty postpones the optimal timing. With an increase in the immigrants over the past ten years, workforces in the host countries have been growing significantly to the extent that the immigrants represent 70% of the increase in the workforce in Europe, and 47% in the United States as OECD indicates. In the present paper, we attempted to investigate the effect of increased uncertainty caused by the growi...

Education Policy Implementation: A Mechanism for Enhancing Primary Education Development in Zanzibar

Education is one of the fundamental rights of individuals; therefore, the government of a country needs to develop and strengthen educational policy and quality as well as to ensure that everyone has equal access to basic education. The improvement of access and quality of education in the world is becoming as an essential factor in development, whereas the basic education (primary school), is acknowledged as a foundation of the higher educational development for every country. To fulfill this goal, governments introduce several policies and procedures; however, it requires some reforms and participation from the politician, policymakers, and other stakeholders to re-examine educational policy so that it can lead to multiplication and betterment of the reforms. Educational reforms actually focus on accountability. A positive educational development and reform is very challenging and needs more effort and strategy on how to use and utilize the resources effectively as such it can achie...