跳至主要内容

Zr-Ti-Ni-Cu amorphous Brazing Fillers Applied to Brazing Titanium TA2 and Q235 Steel

Read full paper at:
http://www.scirp.org/journal/PaperInformation.aspx?PaperID=50237#.VDM9E1fHRK0

Ti-Zr-Cu-Ni amorphous filler with good performance is suitable for joining TC and TB titanium alloy, but its melting temperature is higher than 882.5°C, the α→β phase transition temperature of TA2, which makes the ductility of TA2 fall and the microstructure of the joint coarse. In this paper, Ti-Zr-Cu-Ni amorphous filler was redesigned and optimized by using orthogonal experiment to obtain three easy-to-use Zr-Ti-Ni-Cu amorphous fillers with low melting points and good plasticity. The fast cooling equipment was used to fabricate the brazing filler foils to implement the braze welding of TA2 and Q235 with high frequency inductance. The results indicate that all the brazing foils are amorphous structure with lower melting temperature, for example, Zr52Ti22Ni18Cu8 filler’s is 538°C. The technical parameters in brazing welding are: welding temperature T = 800°C; heating electric current I =25 A; heating time t = 15 s and holding time t = 15 s, in the case of these conditions, the jointing head shear strength of TA2/Zr52Ti24Ni13Cu11/Q235 is 139 MPa. Fracture is mainly located in the brazing seam. The white brittle intermetallic TiFe, TiFe2 and enhancement TiC spread in the center zone of brazing seam.
Cite this paper
Cui, J. , Zhai, Q. , Xu, J. , Wang, Y. and Ye, J. (2014) Zr-Ti-Ni-Cu amorphous Brazing Fillers Applied to Brazing Titanium TA2 and Q235 Steel. Materials Sciences and Applications, 5, 823-829. doi: 10.4236/msa.2014.511082. 
 

[1] Onzawa, T., Suzumura, A. and Ko, M. (2011) Structure and Mechanical Properties of CP Ti and Ti-6Al-4V Alloy Joints Brazed with Ti-Based Amorphous Filler Metals. Journal of the Japan Welding Society, 5, 205-211.
[2] Qi, Y., Zhang, Y.H. and Quan, B.Y. (2003) Development and Application of Braze Welding and Ti-Based Braze Material. Metallic Functional Materials, 10, 31-37.
[3] Huang, Y.J., et al. (2008) Formation, Thermal Stability and Mechanical Properties of Ti42.5Zr7.5Cu40Ni5Sn5 Bulk Metallic Glass. Science in China Series G: Physics, Mechanics and Astronomy, 51, 372-378.
http://dx.doi.org/10.1007/s11433-008-0049-y
[4] Shapiro, A.E. and Flom, Y.A. (2012) Brazing of Titanium at Temperature below 800°C: Review and Prospective Applications. Welding Journal, 50, 1-22.
[5] Chang, H. and Luo, G.Z. (1995) Development of Ti Alloy Used Brazing Filler Metals. Rare Metal Materials and Engineering, 24, 15-20.
[6] Zhang, Q.P. and Zhang Y.S. (2005) Technology and the Developmental Situation of the Titanium Alloy. Aerodynamic Missile Journal, 7, 56-64.
[7] Takemoto, T. (1988) Intermetallic Compounds Formed during Brazing of Titanium with Aluminum Filler Metals. Journal of Material Science, 6, 1301-1308.
http://dx.doi.org/10.1007/BF01154593
[8] Xu, J.F. and Wei, B.B. (2004) Liquid Phase Flow and Microstructure Formation during Rapid Solidification. Acta Physica Sinica, 53, 160-166.
[9] Elrefaey, A. and Tillmann, W. (2007) Interface Characteristics and Mechanical Properties of the Vacuum-Brazed Joint of Titanium-Steel Having a Silver-Based Brazing Alloy. Metallurgical and Materials Transactions, 38, 2956-2961.
http://dx.doi.org/10.1007/s11661-007-9357-5
[10] Zhai, Q.Y., Xu, J.F. and Cui, J. (2013) A Kind of Amorphous Brazing Fillers Applied to Brazing Series TA Titanium Alloy and Stainless Steel. The Chinese Patent No. ZL2013104891392.                               eww141007lx
标签：

评论

发表评论

此博客中的热门博文

Does Immigration Promote the Investment of the Monopolistic Firm?

In the present paper, we examine the effect of increasing uncertainty of immigrants’ growth on the optimal timing of investment of a firm that has a monopolistic power over the labor market. It is revealed that when the uncertainty of immigrants’ growth is more than a threshold level, increasing uncertainty of immigrants’ growth accelerates the optimal timing of firms’ investment and enhances the economic growth, even if the uncertainty of immigrants’ growth is formulated by the geometric Brownian motion, which is in sharp contrast to the standard result that an increase in the uncertainty postpones the optimal timing. With an increase in the immigrants over the past ten years, workforces in the host countries have been growing significantly to the extent that the immigrants represent 70% of the increase in the workforce in Europe, and 47% in the United States as OECD indicates. In the present paper, we attempted to investigate the effect of increased uncertainty caused by the growi...
发表评论
阅读全文

Education Policy Implementation: A Mechanism for Enhancing Primary Education Development in Zanzibar

Education is one of the fundamental rights of individuals; therefore, the government of a country needs to develop and strengthen educational policy and quality as well as to ensure that everyone has equal access to basic education. The improvement of access and quality of education in the world is becoming as an essential factor in development, whereas the basic education (primary school), is acknowledged as a foundation of the higher educational development for every country. To fulfill this goal, governments introduce several policies and procedures; however, it requires some reforms and participation from the politician, policymakers, and other stakeholders to re-examine educational policy so that it can lead to multiplication and betterment of the reforms. Educational reforms actually focus on accountability. A positive educational development and reform is very challenging and needs more effort and strategy on how to use and utilize the resources effectively as such it can achie...
发表评论
阅读全文