跳至主要内容

Unsymmetrical Fibre-Reinforced Plastics for the Production of Curved Textile Reinforced Concrete Elements

Read full paper at:
http://www.scirp.org/journal/PaperInformation.aspx?PaperID=50807#.VE2xmlfHRK0

A new constructive and technological approach was developed for the efficient production of large-dimensioned, curved freeform formworks, which allow the manufacturing of single and double-curved textile reinforced concrete elements. The approach is based on a flexible, multi-layered formwork system, which consists of glass-fibre reinforced plastic (GFRP). Using the unusual structural behavior caused by anisotropy, these GFRP formwork elements permit a specific adjustment of defined curvature. The system design of the developed GFRP formwork and the concrete-lightweight-elements with stabilized spacer fabric was examined exhaustively. Prototypical curved freeform surfaces with different curvature radii were designed, numerically computed and produced. Furthermore, the fabric’s contour accuracy of the fabric was verified, and its integration was adjusted to loads.
Cite this paper
Funke, H. , Gelbrich, S. , Ehrlich, A. , Ulke-Winter, L. and Kroll, L. (2014) Unsymmetrical Fibre-Reinforced Plastics for the Production of Curved Textile Reinforced Concrete Elements. Open Journal of Composite Materials, 4, 191-200. doi: 10.4236/ojcm.2014.44021. 
 

[1] Curbach, M. and Scheerer, S. (2011) Concrete Light—Possibilities and Visions. In: Sruma, V., Ed., Proceedings of the fib Symposium Prague 2011: Concrete Engineering for Excellence and Efficiency, Prague, 8-10 June 2011, 29-44.
[2] Brameshuber, W. (2006) Textile Reinforced Concrete. RILEM Report 36. State-of-the-Art Report of RILEM Technical Committee, TC 201-TRC.
[3] Funke, H., Gelbrich, S., Ehrlich, A. and Kroll, L. (2014) Rheological and Mechanical Development of a Fiber-Reinforced Concrete for an Application in Civil Engineering. SOJ Materials Science & Engineering, 2, 1-4. http://dx.doi.org/10.15226/sojmse
[4] Hofstadler, C. (2008) Schalarbeiten. Springer-Verlag, Berlin, Heidelberg.
[5] Curbach, M. and Jesse, F. (2009) Verstarken mit Textilbeton. In: Bergmeister, K., Fingerloos, F. and Worner, J.-D., Eds., Betonkalender 2010, Teil 1, Abschn. VII. Ernst & Sohn, Berlin.
[6] Funke, H., Gelbrich, S., Ehrlich, A. and Kroll, L. (2014) A Fibre-Reinforced Architectural Concrete for the Newly Designed Facade of the Poseidon Building in Frankfurt am Main. Journal of Materials Science Research, 3, 33-39. http://dx.doi.org/10.5539/jmsr.v3n3p33
[7] Greiner, S. (2007) Zum Tragverhalten von Schalen aus ultrahochfestem Faserfeinkornbeton (UHFFB). Z. Betonund Stahlbetonbau, 100, 77-80.
[8] Funke, H., Gelbrich, S. and Ehrlich, A. (2013) Development of a New Hybrid Material of Textile Reinforced Concrete and Glass Fibre Reinforced Plastic. In: Hufenbach, W.A. and Gude, M., Eds., Procedia Materials Science, Materials Science Engineering, Symposium B6—Hybrid Structures, 2, 103-110.
[9] Curbach, M., Ortlepp, S., Brückner, A., Kratz, M., Offermann, P. and Engler, T. (2003) Entwicklung Einer Grobformatigen, Dünnwandigen, Textilbewehrten Fassadenplatte. Z. Betonund Stahlbetonbau, 98, 345-350. http://dx.doi.org/10.1002/best.200301720
[10] Herzog, T. and Moro, J.L. (1992) Gesprach mit Felix Candela. In: Arcus 18: Zum Werk von Felix Candela—Die Kunst der leichten Schalen, Verlagsgesellschaft Rudolph Müller, Koln, 10-22.
[11] Preisinger, C., Harrer, J., Ressl, C. and Kollegger, J. (2005) Stahlbetonschalen ohne Schalung—Ein neuer Weg im Schalenbau. Betonund Stahlbetonbau, 100, 31-38.
http://dx.doi.org/10.1002/best.200590005
[12] Kroll, L. (2005) Berechnung und technische Nutzung von anisotropiebedingten Werkstoff—Und Struktureffekten für multifunktionale Leichtbauanwendungen. Habilitationsschrift, TU Dresden, Dres-
den.
[13] Kaufmann, J. (2014) Beitrag zu anisotropiebedingten Koppeleffekten bei rotationssymmetrischen mehrschichtigen Faserverbundbauteilen. Promotionsschrift, TU Chemnitz, Chemnitz.
[14] Dallinger, S., Pardatscher, H. and Kollegger, J. (2009) Zweifach gekrümmte Schalen aus Betonfertigteilen. Z. Forschung & Entwicklung für Zement und Beton, 5, 32-33.
[15] Zapf, W. (1990) Schalung für grobformatige gekrümmte Stahlbetonfertigteile. German Patent No. DE 3841579 A1.
[16] Henri, V. (1987) Verfahren und Vorrichtung zum Formen von gebogenen Sektionen aus Beton. European Patent No. EP 0 238 168 A1.
[17] Schürmann, H. (2007) Konstruieren mit Faser-Kunststoff-Verbunden, Springer Verlag, Berlin, Heidelberg, New York.                   eww141027lx
标签：

评论

发表评论

此博客中的热门博文

Does Immigration Promote the Investment of the Monopolistic Firm?

In the present paper, we examine the effect of increasing uncertainty of immigrants’ growth on the optimal timing of investment of a firm that has a monopolistic power over the labor market. It is revealed that when the uncertainty of immigrants’ growth is more than a threshold level, increasing uncertainty of immigrants’ growth accelerates the optimal timing of firms’ investment and enhances the economic growth, even if the uncertainty of immigrants’ growth is formulated by the geometric Brownian motion, which is in sharp contrast to the standard result that an increase in the uncertainty postpones the optimal timing. With an increase in the immigrants over the past ten years, workforces in the host countries have been growing significantly to the extent that the immigrants represent 70% of the increase in the workforce in Europe, and 47% in the United States as OECD indicates. In the present paper, we attempted to investigate the effect of increased uncertainty caused by the growi...
发表评论
阅读全文

Education Policy Implementation: A Mechanism for Enhancing Primary Education Development in Zanzibar

Education is one of the fundamental rights of individuals; therefore, the government of a country needs to develop and strengthen educational policy and quality as well as to ensure that everyone has equal access to basic education. The improvement of access and quality of education in the world is becoming as an essential factor in development, whereas the basic education (primary school), is acknowledged as a foundation of the higher educational development for every country. To fulfill this goal, governments introduce several policies and procedures; however, it requires some reforms and participation from the politician, policymakers, and other stakeholders to re-examine educational policy so that it can lead to multiplication and betterment of the reforms. Educational reforms actually focus on accountability. A positive educational development and reform is very challenging and needs more effort and strategy on how to use and utilize the resources effectively as such it can achie...
发表评论
阅读全文