The Investigation of Replacing Ceramic Bushings with Silicon Bushings in the Distribution Transformers
Read full paper at:
http://www.scirp.org/journal/PaperInformation.aspx?PaperID=50295#.VDSY8VfHRK0
http://www.scirp.org/journal/PaperInformation.aspx?PaperID=50295#.VDSY8VfHRK0
Author(s)
In recent years, the deficiencies of ceramic
insulators along with their high maintenance costs have resulted in the
replacement of ceramic insulators with silicon type in the pollution
area. This idea has been employed for more than two decades in the
polluted areas. Humidity of the weather in the south of Iran and the
presence of pollutants in the air have made special conditions for
construction and maintenance of some equipment including transformer
bushings. Usual ceramic bushings, due to their ability in absorbing
pollution and the rapid reduction of creepage distance (in a limited
time period), have reduced transformer disconnection severely as a
result of earth fault. Additionally, they are costly to be washed
regularly. Therefore, using intelligent materials in designing bushing
can increase the reliability of network and consequently reduction of
costs. In this regard, this paper investigates the use of silicon
bushings in the distribution systems and proposes operational ideas for
the optimal operation of these devices in the polluted areas. The sample
bushing was evaluated based on the IEC60137 standard test.
Cite this paper
Amirbandeh, M. , Yaghoti, A. and Sharifi-Tameh, G.
(2014) The Investigation of Replacing Ceramic Bushings with Silicon
Bushings in the Distribution Transformers. Journal of Surface Engineered Materials and Advanced Technology, 4, 319-325. doi: 10.4236/jsemat.2014.46035.
| [1] | DIN 50019-1 (1979) Technical Climatology Haracterization & Cartographic Representation of Open Air Climates. |
| [2] | Gorur, R.S., Cherney, E.A. and Burnham, J.T. (1999) Outdoor Insulators. Ravi S. Gorur Inc., Phoenix. |
| [3] |
El-Hag, A.H., et al. (2003)
Fundamental and Low Frequency Harmonic Components of Leakage Current as a
Diagnostic Tool to Detect Aging of RTV & HTV Silicon Rubber in Salt
Fog. IEEE Transactions on Dielectrics and Electrical Insulation, 10,
128-136. http://dx.doi.org/10.1109/TDEI.2003.1176575 |
| [4] |
Fernando, M.A.R.M. and Gubanski,
S.M. (2010) Ageing of Silicon Rubber Insulator in Coastal and Inland
Tropical Environment. IEEE Transactions on Dielectrics and Electrical
Insulation, 17, 326-333. http://dx.doi.org/10.1109/TDEI.2010.5448085 |
| [5] | Suwarno, W.W. (2006) Improving the Performances of Outdoor Ceramic Insulators under Severe Conditions by Using Silicone Compound Coatings. WSEAS Transaction on Power System, 1, 1001-1008. |
| [6] |
Cherney, E.A. and Gorur, R.S.
(2006) RTV Silicone Rubber Coatings for Outdoor Insulator. IEEE
Transactions on Dielectrics and Electrical Insulation, 6, 605-611. http://dx.doi.org/10.1109/94.798117 |
| [7] | Rezaee, M., Moradiyan, A.R. and Shariati, M.R. (2006) Leakage Current Monitoring of Insulators in Electrical Equipment Research Base Tropics Hormozgan. 21th International Power System Conference, Tehran, 13-15 November 2006. |
| [8] | Rezaee, M. and Ghasemi, S. (2011) Silicon Rubber Insulators in Electrical Equipment Performance Evaluation Research Base Tropics Hormozgan. 26th International Power System Conference, Tehran. |
| [9] |
Kim, S.-H., Cherney, E.A. and
Hackam, R. (1992) Hydrophobic Behaviour of Insulators Coated with RTV
Silicone Rubber. IEEE Transactions on Electrical Insulation, 27,
610-622. http://dx.doi.org/10.1109/14.142726 |
| [10] |
Suda, T. (2005) Frequency
Characteristics of Leakage Current Waveforms of a String of Suspension
Insulators. IEEE Transactions on Power Delivery, 20, 481-487. http://dx.doi.org/10.1109/TPWRD.2004.837668 |
| [11] | Memaripour, A., Abrosh, H. and Sheykholeslam, A.R. (2011) Study of Leakage Current Relationship with Infection in Ceramic Insulators. 11th Electric Power Distribution Conference, Iran. |
| [12] | Dostibarhagh, H., Honrmand, M.E. and Talebi, J. (2011) The Study and Science Experiments for Porcelain Insulator Punching Power Distribution Company in Gilan. 14th Electric Power Distribution Conference, Iran. |
| [13] |
Kavousi-Fard, A. and Niknam, T.
(2014) Optimal Distribution Feeder Reconfiguration for Reliability
Improvement Considering Uncertainty. IEEE Transactions on Power
Delivery, 29, 1344-1353. http://dx.doi.org/10.1109/TPWRD.2013.2292951 |
| [14] |
Kavousi-Fard, A. and Niknam, T.
(2014) Multi-Objective Stochastic Distribution Feeder Reconfiguration
from the Reliability Point of View. Energy, 64, 342-354. http://dx.doi.org/10.1016/j.energy.2013.08.060 |
| [15] |
Kavousi-Fard, A., Niknam, T. and
Khosravi, A. (2014) Multi-Objective Probabilistic Distribution Feeder
Reconfiguration Considering Wind Power Plants. International Journal of
Electrical Power and Energy Systems, 55, 680-691. http://dx.doi.org/10.1016/j.ijepes.2013.10.028 eww141008lx |
| [16] | Kavousi-Fard, A., Samet, H. and Marzban, F. (2014) A New Hybrid Modified Firefly Algorithm and Support Vector Regression Model for Accurate Short Term Load Forecasting. Expert Systems with Applications, 41, 6047-6056. |
评论
发表评论