跳至主要内容

Synthesis and Characterization of Novel Sulphanilamide/Epoxy Resin Modified Polyester for Thermal Stability and Impact Strength

Read full paper at:
http://www.scirp.org/journal/PaperInformation.aspx?PaperID=50697#.VEiV8lfHRK0

The synthesis of thermally stable Tetra-di-glycidyl ether bisphenol-A (TDGEBA) Epoxy resin and Sulphanilamide (SAA) have been synthesized from (SAA) and TDGEBA by in situ polymerization technique to obtain Te-tra-di-glycidyl ether bisphenol-A Sulphanilamide (TDGEBA/SAA) Epoxy resin and modified with various per-centages of polyester (PE) to obtain Tetra diglycidyl ether bisphenol-A Sulphanilamide polyester (TDGEBA/SAA-PE), highly cross-linked thermosetting polymer network. These materials were cured with triethylenetetramine TETA (hardener) to obtain highly cross-linked thermosetting resin. The physical properties of the resulting blends were evaluated by measuring the impact strength of (TDGEBA/SAA-PE) (increased more than 30% than the unmodified epoxy resin) and hardness that is found to be higher than unmodified epoxy resin. Differential scanning calorimetry (DSC) and thermo gravimetric (TGA) analysis were also cured to assess the thermal behavior of the samples. DSC of the (TDGEBA/SAA) Epoxy resin cured with TETA showed exothermic reactions and the glass transition temperature (Tg) shifted from 350℃ to 400℃compared with uncured epoxy and the thermal stability of the TDGEBA/SAA epoxy resin modified increased with increasing of PE. Scanning Electron Microscopy (SEM) studied the morphology of the samples after unnotched impacts on fracture surfaces. These materials exhibited a higher degree of solvent resistance.
Cite this paper
Alhousami, M. , Al-Kamali, A. and Athawale, A. (2014) Synthesis and Characterization of Novel Sulphanilamide/Epoxy Resin Modified Polyester for Thermal Stability and Impact Strength. Open Journal of Polymer Chemistry, 4, 115-127. doi: 10.4236/ojpchem.2014.44013. 
 

[1] Ju, M.-Y. and Chang, F.-C. (1999) Polymer Blends of PET-PS Compatibilized by SMA and Epoxy Dual Compatibilizers. Journal of Applied Polymer Science, 73, 2029-2040.
http://dx.doi.org/10.1002/(SICI)1097-4628(19990906)73:10<2029::AID-APP21>3.0.CO;2-U
[2] Rosu, D., Mititelu, A. and Cascaval, C.N. (2004) Cure Kinetics of a Liquid-Crystalline Epoxy Resin Studied by NonIsothermal Data. Polymer Testing, 23, 23209-23215.
http://dx.doi.org/10.1016/S0142-9418(03)00082-5
[3] Agag, T. and Takeichi, T. (1999) Synthesis and Characterization of Epoxy Film Cured with Reactive Polyimide. Polymer, 40, 6557-6563. http://dx.doi.org/10.1016/S0032-3861(99)00026-9
[4] Micco, G., Giamberini, M., Amendola, E., Carfagna, C. and Astarita, G. (1997) Modelling of Curing Reaction Kinetics in Liquid-Crystalline Epoxy Resins. Industrial Engineering Chemistry Research, 36, 2976.
http://dx.doi.org/10.1021/ie9606810
[5] Ameer, A.A., Abdallh, M.S., Ahmed, A.A. and Yousif, E.A. (2013) Synthesis and Characterization of Polyvinyl Chloride Chemically Modified by Amines. Open Journal of Polymer Chemistry, 3, 11-15.
http://dx.doi.org/10.4236/ojpchem.2013.31003
[6] Gun-Soo, L. and Myoung-Seon, G. (2001) Preparation of Epoxy Resins Containing Ether Ether Sulfone Unit and Thermal Properties. Bulletin of the Korean Chemical Society, 22, 1393-1396.
[7] Kun-Soo, L., Young-Chul, L., Bong-Gyoo, C. and Myoung-Seon, G. (2001) Preparation of Epoxy Resins Containing Ether Ether Ketene Unit and Their Thermal Properties. Bulletin of the Korean Chemical Society, 22, 424-426.
[8] Athawale, A.A. and Alhousami, M.H.M. (2009) Epoxy Resin-Modified, Urea-Formaldehyde/Silicon Net Works for High Impact Strength and Thermal Stability. Journal of Reinforced Plastics and Composites, 28, 2231-2239.
http://dx.doi.org/10.1177/0731684408092366
[9] Ren, H., Sun, J.Z., Wu, B.J. and Zhou, Q.Y. (2007) Synthesis and Properties of Phosphorus-Containing Flam Retardant Epoxy Resin Based on Bis-Phenoxy (3-Hydroxy) Phenyl Phosphine Oxide. Polymer Degradation and Stability. 92, 956-961. http://dx.doi.org/10.1016/j.polymdegradstab.2007.03.006
[10] Iijima, T., Aral, N., Fukuda, W. and Tomoi, M. (1995) Toughening of Aromatic Diamine-Cured Epoxy Resins by Poly (Ethylene Phthalate)s and the Related co Polyesters. European Polymer Journal, 3, 275-284.
http://dx.doi.org/10.1016/0014-3057(94)00154-5
[11] Jang, J. and Shin, S. (1995) Toughness Improvement of Tetrafunctional Epoxy Resin by Using Hydrolysed Poly(Ether Amide). Polymer, 6, 1199-1207. http://dx.doi.org/10.1016/0032-3861(95)93921-8
[12] Yang, G., Fu, S.-Y. and Yang, J.-P. (2007) Preparation and Mechanical Properties of Modified Epoxy Resins with Flexible Diamines. Polymer, 48, 202-310. http://dx.doi.org/10.1016/j.polymer.2006.11.031
[13] Mercado, L.A., Galià, M. and Reina, J.A. (2006) Silicon-Containing Flame Retardant Epoxy Resins: Synthesis, Characterization and Properties. Polymer Degradation and Stability, 91, 2588-2594.
http://dx.doi.org/10.1016/j.polymdegradstab.2006.05.007
[14] Pugliaa, D., Manfredib, L.B., Vazquezb, A. and Kenny, J.M. (2001) Thermal Degradation and Fire Resistance of Epoxy-Amine-Phenolic Blends. Polymer Degradation and Stability, 73, 521-527.
http://dx.doi.org/10.1016/S0141-3910(01)00157-4
[15] Perrin, F.X., Nguyen, T.M.H., Tran, T.M.L. and Vernet, J.L. (2006) Determination of Bisphenol A (BPA) by Gas Chromatography-Mass Spectrometry and 1H NMR Spectroscopy during Curing of Epoxy-Amine Resins. Polymer Testing, 25, 912-922. http://dx.doi.org/10.1016/j.polymertesting.2006.05.015
[16] El Gersifi, K., Destais-Orvoen, N., Durand, G. and Tersac, G. (2003) Glycolysis of Epoxide-Amine Hardened Networks. I. Diglycidylether/Aliphatic Amines Model Networks. Polymer, 44, 3795-3801.
http://dx.doi.org/10.1016/S0032-3861(03)00324-0
[17] Mimura, K., Ito, H. and Fujioka, H. (2001) Toughening of Epoxy Resin Modified with in Situ Polymerized Thermoplastic Polymers. Polymer, 42, 9223-9233. http://dx.doi.org/10.1016/S0032-3861(01)00460-8
[18] Merrit, M.E., Heux, L., Halary, J.L. and Schaefer, J. (1997) Determination of the Extent of Reaction of Amine Cross-Linked Epoxy Resins by Solid-State 13C and 15N NMR. Macromolecules, 30, 6760-6763.
http://dx.doi.org/10.1021/ma970757j
[19] Barie Jr., W.P. and Franke, N.W. (1969) High-Temperature Epoxy Resins Based on 3,3,4,4-Benzophenoeteracarboxyic Dianhydride (BTDA). I.EC Product Research and Development, 1, 72-76.
[20] Mohammadnia, M.S., Salaryan, P., Azimi, Z.K. and Seyidov, F.T. (2012) Preparation and Characterization of Polyesters with Controlled Molecular Weight Method. International Journal of Chemical and Biochemical Sciences, 2, 36-41.
[21] Watts, J.F., M.-L. Abel, Perruchot, C., Loweb, C., Maxted, J.T. and White, R.G. (2001) Segregation and Crosslinking in Urea Formaldehyde/Epoxy Resins: A Study by High-Resolution XPS. Journal of Electron Spectroscopy and Related Phenomena, 121, 233-247.
http://dx.doi.org/10.1016/S0368-2048(01)00337-1
[22] Huang, M.L. and Williams, J.G. (1994) Mechanisms of Solidification of Epoxy-Amine Resins during Cure. Macromolecules, 27, 7423-7428.
[23] Lo, E.S. (1960) An Epoxy Resin from Phenolphthalein. Industrial & Engineering Chemistry, 52, 319-326.
[24] Bader, M.G., Bailey, J.E. and Bell, I. (1973) The Effect of Fibre-Matrix Interface Strength on the Impact and Fracture Properties of Carbon-Fibre Reinforced Epoxy Resin Composites. Journal of Physics D: Applied Physics, 6, 572-586.
http://dx.doi.org/10.1016/S0368-2048(01)00337-1
[25] Ju, M.-Y. and Chang, F.-G. (1999) Polymer Blends of PET-PS Compatibilized by SMA and Epoxy Dual Compatibilizers. Journal of Applied Polymer Science, 73, 2029-2040.
http://dx.doi.org/10.1002/(SICI)1097-4628(19990906)73:10<2029::AID-APP21>3.0.CO;2-U
[26] Soldatos, A.C. and Burhans, A.S. (1970) Cycloaliphatic Epoxy Resins with Improved Strength and Impact Coupled with High Heat Distortion Temperature. Industrial & Engineering Chemistry, 3, 296-300.
[27] Lin, J.-J., Lin, S.-F., Kuo, T.-T., Chang, F.-C. and Tseng, F.-P. (2000) Synthesis and Epoxy Curing of Mannich Bases Derived from Bisphenol A and Poly(Oxyalkylene) Diamine. Journal of Applied Polymer Science, 78, 615-623.
http://dx.doi.org/10.1002/1097-4628(20001017)78:3<615::AID-APP170>3.0.CO;2-N
[28] Wang, M.S. and Pinnavaia, T.J. (1994) Clay-Polymer Nanocomposites Formed from Acidic Derivatives of Montmorillonite and an Epoxy Resin. Chemistry of Materials, 6, 468-474.
http://dx.doi.org/10.1021/cm00040a022
[29] Vanaja, A. and Rao, R.M.V.G.K. (2002) Synthesis and Characterisation of Epoxy-Novolac/Bismaleimide Networks. European Polymer Journal, 38, 187-193. http://dx.doi.org/10.1016/S0014-3057(01)00094-5
[30] Chen, S., Tian, Y., Chen, L. and Hu, T. (2006) Epoxy Resin/Polyurethane Hybrid Networks Synthesized by Frontal Polymerization. Chemistry of Materials, 18, 2159-2163.
[31] Tieke, B. and Zahir, S.A. (1993) Anew Cross-Linkable Palladium (0) Complex and Its Use for Electroless Metallization of Epoxy Resins. Chemistry of Materials, 5, 891-897.
http://dx.doi.org/10.1021/cm00030a028
[32] Levchik, S.V., Camino, G., Luda, M.P., Costa, L., Henry, B.C.Y., Muller, G. and Morel, E. (1995) Mechanistic Study of Thermal Behaviour and Combustion Performance of Epoxy Resins 11 GDDM/DDS System. Polymer Degradation and Stability, 24, 359-370. http://dx.doi.org/10.1016/0141-3910(95)00084-Y
[33] Ambrogi, V., Giamberini, M., Cerruti, P., Pucci, P., Menna, N., Mascolo, R. and Carfgne, C. (2005) Liquid Crystalline Elastomers Based on Diglycidyl Terminated Rigid Monomers and Aliphatic Acids. Part 1. Synthesis and Characterization. Polymer, 46, 2105-2121.
http://dx.doi.org/10.1016/j.polymer.2005.01.007
[34] Merritt, M.E., Goetz, J.M., Whitney, D., Paul, C.-P., Heux, L., Halary, J.L. and Schaefer, J. (1998) Location of the Antiplasticizer in Cross-Linked Epoxy Resins by 2H, 15N and 13C REDOR NMR. Macromolecules, 31, 1214-1220.
http://dx.doi.org/10.1021/ma9708306
[35] Jansen, B.J.P., Tamminga, K.Y., Meijer, H.E.H. and Lemstra, P.J. (1999) Preparation of Thermoset Rubbery Epoxy Particles as Novel Toughening Modifiers for Glassy Epoxy Resins. Polymer, 40, 5601-5607.
http://dx.doi.org/10.1016/S0032-3861(98)00774-5            eww141023lx
标签：

评论

发表评论

此博客中的热门博文

Does Immigration Promote the Investment of the Monopolistic Firm?

In the present paper, we examine the effect of increasing uncertainty of immigrants’ growth on the optimal timing of investment of a firm that has a monopolistic power over the labor market. It is revealed that when the uncertainty of immigrants’ growth is more than a threshold level, increasing uncertainty of immigrants’ growth accelerates the optimal timing of firms’ investment and enhances the economic growth, even if the uncertainty of immigrants’ growth is formulated by the geometric Brownian motion, which is in sharp contrast to the standard result that an increase in the uncertainty postpones the optimal timing. With an increase in the immigrants over the past ten years, workforces in the host countries have been growing significantly to the extent that the immigrants represent 70% of the increase in the workforce in Europe, and 47% in the United States as OECD indicates. In the present paper, we attempted to investigate the effect of increased uncertainty caused by the growi...
发表评论
阅读全文

Education Policy Implementation: A Mechanism for Enhancing Primary Education Development in Zanzibar

Education is one of the fundamental rights of individuals; therefore, the government of a country needs to develop and strengthen educational policy and quality as well as to ensure that everyone has equal access to basic education. The improvement of access and quality of education in the world is becoming as an essential factor in development, whereas the basic education (primary school), is acknowledged as a foundation of the higher educational development for every country. To fulfill this goal, governments introduce several policies and procedures; however, it requires some reforms and participation from the politician, policymakers, and other stakeholders to re-examine educational policy so that it can lead to multiplication and betterment of the reforms. Educational reforms actually focus on accountability. A positive educational development and reform is very challenging and needs more effort and strategy on how to use and utilize the resources effectively as such it can achie...
发表评论
阅读全文