跳至主要内容

Protection Systems for Reinforced Concrete with Corrosion Inhibitors

Read full paper at:
http://www.scirp.org/journal/PaperInformation.aspx?PaperID=51063#.VFMCYWfHRK0

This paper examines the use of corrosion inhibitors in order to protect the reinforcement of concrete. For this purpose mortar specimens were constructed with or without corrosion inhibitors and were partially immersed in sodium chloride. Corrosion inhibitors were used as admixture into concrete and were sprayed on the external surface of mortar specimens. In all mortar specimens, electric junction between reinforcements was achieved. The methods that were used for the evaluation of the reinforcement corrosion in concrete, included half-cell potential measurements, polarization curves of reinforced rebars and mass loss of the reinforcement. Finally, the durability of concrete after the use of corrosion inhibitors was also examined.
Cite this paper
Zacharopoulou, A. , Zacharopoulou, E. and Batis, G. (2014) Protection Systems for Reinforced Concrete with Corrosion Inhibitors. Open Journal of Metal, 4, 86-92. doi: 10.4236/ojmetal.2014.44010
 

[1] Batis, G., Kouloumbi, N. and Pantazopoulou, P. (2005) Corrosion Protection of Steel in Pumice Lightweight Mortar by Coatings. Cement and Concrete Composites, 27, 261-267.
http://dx.doi.org/10.1016/j.cemconcomp.2004.02.015
[2] Kouloumbi, N. and Batis, G. (1992) Chloride Corrosion of Steel Rebars in Mortars with Fly Ash Admixtures. Cement and Concrete Composites, 14, 199-207.
http://dx.doi.org/10.1016/0958-9465(92)90014-M
[3] Broomfield, J. (1997) Corrosion of Steel in Concrete Understanding, Investigation and Repair. E & FN SPOK, London, 16-21.
[4] Basheer, P.A.M., Basheer, L., Cleland, D.J. and Long, A.E. (1997) Surface Treatments for Concrete: Assessment Methods and Reported Performance. Construction and Building Materials, 7-8, 413-429.
http://dx.doi.org/10.1016/S0950-0618(97)00019-6
[5] Ibrahim, M., Al-Gahtani, A.S. and Maslehuddin, M. (1999) Use of Surface Treatment Materials to Improve Concrete Durability. Journal of Materials in Civil Engineering, 11, 36-40.
http://dx.doi.org/10.1061/(ASCE)0899-1561(1999)11:1(36)
[6] Brown, M.C. (1999) Assessment of Commercial Corrosion Inhibiting Admixtures for Reinforced Concrete. Virginia Polytechnic Institute, Virginia.
[7] ELOT 142-37, Hellenic Organization of Standardization, Athens.
[8] Swamy, R.N., Suryavanshi, A.K. and Tanikawa, S. (1998) Protective Ability of an Acrylic Based Surface Coating System against Chloride and Carbonation Penetration into Concrete. ACI Materials Journal, 95, 101-112.
[9] ASTMC876-87 (1987) Standard Test Method for Half-Cell Potentials of Reinforcing Steel in Concrete. ASTM International, Philadelphia.
[10] ASTM G59-97 (2009) Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements. ASTM International, Philadelphia.
[11] ISO/DIS 8407.3 (1986) Procedures for Removal of Corrosion Products from Corrosion Test Specimen. Genève.
[12] Gu, P. and Beaudoin, J. (1998) Estimation of Steel Corrosion Rate in Reinforced Concrete by Means of Equivalent Fittings of Impedance Spectra. Advances in Cement Research, 10, 43-56.
http://dx.doi.org/10.1680/adcr.1998.10.2.43
[13] Buenfeld, N.R. and Zhang, J.-Z. (1998) Chloride Diffusion through Surface-Treated Mortar Specimens. Cement and Concrete Research, 28, 665-674.
http://dx.doi.org/10.1016/S0008-8846(98)00031-3
[14] DIN EN 7783-2 (1999) Determination and Classification of Water-Vapor Transmission Rate (Permeability).
[15] Al-Amoudi, O.S.B., Maslehuddin, M., Lashari, A.N. and Almusallam, A.A. (2003) Effectiveness of Corrosion Inhibitors in Contaminated Concrete. Cement & Concrete Composites, 25, 439-449.
[16] Fedrizzi, L., et al. (2005) Corrosion Inhibitors in Reinforced Concrete Structures Part 3—Migration of Inhibitors into Concrete. Cement and Concrete Research, 35, 551-561.                            eww141031lx

评论

此博客中的热门博文

Does Immigration Promote the Investment of the Monopolistic Firm?

In the present paper, we examine the effect of increasing uncertainty of immigrants’ growth on the optimal timing of investment of a firm that has a monopolistic power over the labor market. It is revealed that when the uncertainty of immigrants’ growth is more than a threshold level, increasing uncertainty of immigrants’ growth accelerates the optimal timing of firms’ investment and enhances the economic growth, even if the uncertainty of immigrants’ growth is formulated by the geometric Brownian motion, which is in sharp contrast to the standard result that an increase in the uncertainty postpones the optimal timing. With an increase in the immigrants over the past ten years, workforces in the host countries have been growing significantly to the extent that the immigrants represent 70% of the increase in the workforce in Europe, and 47% in the United States as OECD indicates. In the present paper, we attempted to investigate the effect of increased uncertainty caused by the growi...

Education Policy Implementation: A Mechanism for Enhancing Primary Education Development in Zanzibar

Education is one of the fundamental rights of individuals; therefore, the government of a country needs to develop and strengthen educational policy and quality as well as to ensure that everyone has equal access to basic education. The improvement of access and quality of education in the world is becoming as an essential factor in development, whereas the basic education (primary school), is acknowledged as a foundation of the higher educational development for every country. To fulfill this goal, governments introduce several policies and procedures; however, it requires some reforms and participation from the politician, policymakers, and other stakeholders to re-examine educational policy so that it can lead to multiplication and betterment of the reforms. Educational reforms actually focus on accountability. A positive educational development and reform is very challenging and needs more effort and strategy on how to use and utilize the resources effectively as such it can achie...