跳至主要内容

Electrochemical Investigation of Corrosion on AISI 316 Stainless Steel and AISI 1010 Carbon Steel: Study of the Behaviour of Imidazole and Benzimidazole as Corrosion Inhibitors

Read full paper at:
http://www.scirp.org/journal/PaperInformation.aspx?PaperID=50548#.VECR7lfHRK0

An electrochemical investigation of the corrosion on AISI 316 austenitic stainless steel and AISI 1010 carbon steel in sodium chloride solution (3.0 wt.%) was performed in the absence and presence of imidazole and benzimidazole corrosion inhibitors. The results showed that at any inhibitor concentration (25 ppm to 1000 ppm), there was an increase in the polarisation resistance of both steels. The highest efficiency of corrosion inhibition was obtained using imidazole at a concentration of 50 ppm for both steels, with values of 96% for the AISI 316 stainless steel and 73% for the AISI 1010 carbon steel.
Cite this paper
Moreira, R. , Soares, T. and Ribeiro, J. (2014) Electrochemical Investigation of Corrosion on AISI 316 Stainless Steel and AISI 1010 Carbon Steel: Study of the Behaviour of Imidazole and Benzimidazole as Corrosion Inhibitors. Advances in Chemical Engineering and Science, 4, 503-514. doi: 10.4236/aces.2014.44052
 

[1] Groysman, A. and Brodsky, N. (2006) Corrosion and Quality. Accreditation and Quality Assurance, 10, 537-542. http://dx.doi.org/10.1007/s00769-005-0034-3
[2] Almeida, M. (2005) Minimisation of Steel Atmospheric Corrosion: Updated Structure of Intervention. Progress in Organic Coatings, 54, 81-90. http://dx.doi.org/10.1016/j.porgcoat.2005.01.007
[3] Hao, L., Zhang, S., Dong, J. and Ke, W. (2011) Atmospheric Corrosion Resistance of MnCuP Weathering Steel in Simulated Environments. Corrosion Science, 53, 4187-4192.
http://dx.doi.org/10.1016/j.corsci.2011.08.028
[4] Shifler, D.A. (2005) Understanding Material Interactions in Marine Environments to Promote Extended Structural Life. Corrosion Science, 47, 2335-2352. http://dx.doi.org/10.1016/j.corsci.2004.09.027
[5] Kage, I., Matsui, K. and Kawabata, F. (2005) Minimum Maintenance Steel Plates and Their Application Technologies for Bridge-Life Cycle Cost Reduction Technologies with Environmental Safeguards for Preserving Social Infrastructure Assets. JFE Technical Report, 5, 31-37.
[6] Tsutsumi, Y., Nishikata, A. and Tsuru, T. (2007) Pitting Corrosion Mechanism of Type 304 Stainless Steel under a Droplet of Chloride Solutions. Corrosion Science, 49, 1394-1407.
http://dx.doi.org/10.1016/j.corsci.2006.08.016
[7] Laycock, N.J. and Newman, R.C. (1997) Localised Dissolution Kinetics, Salt Films and Pitting Potentials. Corrosion Science, 39, 1771-1790. http://dx.doi.org/10.1016/S0010-938X(97)00049-8
[8] Newman, R.C. (2001) Understanding the Corrosion of Stainless Steel. Corrosion, 57, 1030-1041. http://dx.doi.org/10.5006/1.3281676
[9] Martini, E.M.A. and Muller, I.L. (2000) Characterization of the Film formed on Iron in Borate Solution by Electrochemical Impedance Spectroscopy. Corrosion Science, 42, 443-454.
http://dx.doi.org/10.1016/S0010-938X(99)00064-5
[10] Pistorius, P.C. and Burstein G.T. (1992) Metastable Pitting Corrosion of Stainless Steel and the Transition to Stability. Philosophical Transactions of the Royal Society A, 341, 531-559.
http://dx.doi.org/10.1098/rsta.1992.0114
[11] Kondo, Y. (1989) Prediction of Fatigue Crack Initiation Life Based on Pit Growth. Corrosion, 45, 7-11. http://dx.doi.org/10.5006/1.3577891
[12] Turnbull, A., Mccartney, L.N. and Zhou, S. (2006) A Model to Predict the Evolution of Pitting Corrosion and the Pit-to-Crack Transition Incorporating Statistically Distributed Input Parameters. Corrosion Science, 48, 2084-2105. http://dx.doi.org/10.1016/j.corsci.2005.08.010
[13] Baddoo, N.R. (2008) Stainless Steel in Construction: A Review of Research, Applications, Challenges and Opportunities. Journal of Constructional Steel Research, 64, 1199-1206.
http://dx.doi.org/10.1016/j.jcsr.2008.07.011
[14] Malik, A.U., Siddiqi, N., Ahmad, S. and Andijani, I.N. (1995) The Effect of Dominant Alloy Additions on the Corrosion Behaviour of Some Conventional and High Alloy Stainless Steels in Seawater. Corrosion Science, 37, 1521-1535. http://dx.doi.org/10.1016/0010-938X(95)00043-J
[15] Lippold, J.C. and Kotecki, D.J. (2005) Welding Metallurgy of Stainless Steel. Wiley-Intercience, New Jersey.
[16] Avci, R., Davis, B.H., Wolfenden, M.L., Beech, I.B., Lucas, K. and Paul, D. (2013) Mechanism of MnS-Mediated Pit Initiation and Propagation in Carbon Steel in an Anaerobic Sulfidogenic Media. Corrosion Science, 76, 267-274. http://dx.doi.org/10.1016/j.corsci.2013.06.049
[17] Rangaraju, R.R., Raja, K.S., Panday, A. and Misra, M. (2010) Low-Cost Photoelectrocatalyst Based on a Nanoporous Oxide Layer of Low-Carbon Steel. Journal of Physics D: Applied Physics, 43, Article ID: 445301. http://dx.doi.org/10.1088/0022-3727/43/44/445301
[18] Ormellese, M., Lazzari, L., Goidanich, S., Fumagalli, G. and Brenna, A. (2009) A Study of Organic Substances as Inhibitors for Chloride-Induced Corrosion in Concrete. Corrosion Science, 51, 2959-2968. http://dx.doi.org/10.1016/j.corsci.2009.08.018
[19] Fekry, A.M. and Ameer, M.A. (2010) Corrosion Inhibition of Mild Steel in Acidic Media Using Newly Synthesized Heterocyclic Organic Molecules. International Journal of Hydrogen Energy, 35, 7641-7651. http://dx.doi.org/10.1016/j.ijhydene.2010.04.111
[20] Lunarska, E. and Chernyayeva, O. (2006) Effect of Corrosion Inhibitors on Hydrogen Uptake by Al from NaOH Solution. International Journal of Hydrogen Energy, 31, 285-293.
http://dx.doi.org/10.1016/j.ijhydene.2005.04.051
[21] Zucchi, F., Trabanelli, G., Frignani, A. and Zucchini, M. (1978) The Inhibition of Stress Corrosion Cracking of Stainless Steels in Chloride Solutions. Corrosion Science, 18, 87-95.
http://dx.doi.org/10.1016/S0010-938X(78)80078-X
[22] Galal, A., Atta, N.F. and Al-Hassan, M.H.S. (2005) Effect of Some Thiophene Derivatives on the Electrochemical Behaviour of AISI 316 Austenitic Stainless Steel in Acidic Solutions Containing Chloride Ions I. Molecular Structure and Inhibition Efficiency Relationship. Materials Chemistry and Physics, 89, 38-48. http://dx.doi.org/10.1016/j.matchemphys.2004.08.019
[23] Goudarzi, N. and Farahani, H. (2014) Investigation on 2-Mercaptobenzothiazole Behaviour as Corrosion Inhibitor for 316-Stainless Steel in Acidic Media. Anti-Corrosion Methods and Materials, 61, 20-26. http://dx.doi.org/10.1108/ACMM-11-2012-1223
[24] Granero, M.F.L., Matai, P.H.L.S., Aoki, I.V. and Guedes, I.C. (2009) Dodigen 213-N as Corrosion Inhibitor for ASTM 1010 Mild Steel in 10% HCl. Journal of Applied Electrochemistry, 39, 1199-1205.
http://dx.doi.org/10.1007/s10800-009-9785-6
[25] Duda, Y., Govea-Rueda, R., Galicia, M., Beltrán, H.I. and Zamudio-Rivera, L.S. (2005) Corrosion Inhibitors: Design, Performance and Computer Simulations. The Journal of Physical Chemistry B, 109, 22674-22684. http://dx.doi.org/10.1021/jp0522765
[26] Kuznetsov, Y.I. and Kazansky, L.P. (2008) Physicochemical Aspects of Metal Protection by Azoles as Corrosion Inhibitors. Russian Chemical Reviews, 77, 219-232.
http://dx.doi.org/10.1070/RC2008v077n03ABEH003753
[27] Khaled, K.F. (2003) The Inhibition of Benzimidazole Derivatives on Corrosion of Iron in 1M HCl Solutions. Electrochimica Acta, 48, 2493-2503. http://dx.doi.org/10.1016/S0013-4686(03)00291-3
[28] Wang, L. (2001) Evaluation of 2-Mercaptobenzimidazole as Corrosion Inhibitor for Mild Steel in Phosphoric Acid. Corrosion Science, 43, 2281-2289.
http://dx.doi.org/10.1016/S0010-938X(01)00036-1
[29] Popova, A., Christov, M. and Deligeorgiev, T. (2003) Influence of the Molecular Structure on the Inhibitor Properties of Benzimidazole Derivatives on Mild Steel Corrosion in 1 M Hydrochloric Acid. Corrosion, 59, 756-764.
http://dx.doi.org/10.5006/1.3277604
[30] Aljourani, J., Raeissi, K. and Golozar, M.A. (2009) Benzimidazole and Its Derivatives as Corrosion Inhibitors for Mild Steel in 1M HCl Solution. Corrosion Science, 51, 1836-1843.
http://dx.doi.org/10.1016/j.corsci.2009.05.011
[31] Zhang, Z., Chen, S., Li, Y., Li, S. and Wanga, L. (2009) A Study of the Inhibition of Iron Corrosion by Imidazole and Its Derivatives Self-Assembled Films. Corrosion Science, 51, 291-300.
http://dx.doi.org/10.1016/j.corsci.2008.10.040
[32] Curkovic, H.O., Stupnisek-lisac, E. and Takenouti, H. (2010) The Influence of pH Value on the Efficiency of Imidazole Based Corrosion Inhibitors of Copper. Corrosion Science, 52, 398-405.
http://dx.doi.org/10.1016/j.corsci.2009.09.026
[33] Zhang, D.Q., Gao, L.X. and Zhou, G.D. (2004) Inhibition of Copper Corrosion in Aerated Hydrochloric Acid Solution by Heterocyclic Compounds Containing a Mercapto Group. Corrosion Science, 46, 3031-3040. http://dx.doi.org/10.1016/j.corsci.2004.04.012
[34] Popova, A., Sokolova, E., Raicheva, S. and Christov, M. (2003) AC and DC Study of the Temperature Effect on Mild Steel Corrosion in Acid Media in the Presence of Benzimidazole Derivatives. Corrosion Science, 45, 33-58. http://dx.doi.org/10.1016/S0010-938X(02)00072-0
[35] Kokalj, A. (2013) Formation and Structure of Inhibitive Molecular Film of Imidazole on Iron Surface. Corrosion Science, 68, 195-203. http://dx.doi.org/10.1016/j.corsci.2012.11.015
[36] Mendes, J.O., Silva, E.C. and Rocha, A.B. (2012) On the Nature of Inhibition Performance of Imidazole on Iron Surface. Corrosion Science, 57, 254-259. http://dx.doi.org/10.1016/j.corsci.2011.12.011
[37] Mousavi, M., Mohammadalizadeh, M. and Khosravan, A. (2011) Theoretical Investigation of Corrosion Inhibition Effect of Imidazole and Its Derivatives on Mild Steel Using Cluster Model. Corrosion Science, 53, 3086-3091. http://dx.doi.org/10.1016/j.corsci.2011.05.034
[38] ASM International Handbook Committee (1990) Volume 1: Properties and Selection: Irons, Steels and High-Performance Alloys. ASM International, Ohio, 150.
[39] Li, Y., Hu, R.G., Wang, J.R., Huang, Y.X. and Lin, C.-J. (2009) Corrosion Initiation of Stainless Steel in HCl Solution Studied Using Electrochemical Noise and in Situ Atomic Force Microscope. Electrochimica Acta, 54, 7134-7140. http://dx.doi.org/10.1016/j.electacta.2009.07.042
[40] Gammer, K., Rosner, M., Poeckl, G. and Hutter, H. (2003) AES and SIMS Analysis of Non-Metallic Inclusions in a Low-Carbon Chromium-Steel. Analytical and Bioanalytical Chemistry, 376, 255-259. http://dx.doi.org/10.1007/s00216-003-1851-z
[41] Yang, Y.Z., Jiang, Y.M. and Li, J. (2013) In Situ Investigation of Crevice Corrosion on UNS S32101 Duplex Stainless Steel in Sodium Chloride Solution. Corrosion Science, 76, 163-169.
http://dx.doi.org/10.1016/j.corsci.2013.06.039
[42] Tang, Y., Zhang, F., Hu, S., Cao, Z., Wu, Z. and Jing, W. (2013) Novel Benzimidazole Derivatives as Corrosion Inhibitors of Mild Steel in the Acidic Media. Part I: Gravimetric, Electrochemical, SEM and XPS studies. Corrosion Science, 74, 271-282. http://dx.doi.org/10.1016/j.corsci.2013.04.053
[43] Khaled, K.F. and Amin, M.A. (2009) Corrosion Monitoring of Mild Steel in Sulphuric Acid Solutions in Presence of Some Triazole Derivatives—Molecular Dynamics, Chemical and Electrochemical Studies. Corrosion Science, 51, 1964-1975. http://dx.doi.org/10.1016/j.corsci.2009.05.023
[44] Negma, N.A., Kandile, N.G., Badr, E.A. and Mohammed, M.A. (2012) Gravimetric and Electrochemical Evaluation of Environmentally Friendly Nonionic Corrosion Inhibitors for Carbon Steel in 1 M HCl. Corrosion Science, 65, 94-103. http://dx.doi.org/10.1016/j.corsci.2012.08.002
[45] He, X., Jiang, Y., Li, C., Wang, W., Hou, B. and Wu, L. (2014) Inhibition Properties and Adsorption Behaviour of Imidazole and 2-Phenyl-2-Imidazoline on AA5052 in 1.0 M HCl Solution. Corrosion Science, 83, 124-136. http://dx.doi.org/10.1016/j.corsci.2014.02.004           eww141017lx

评论

此博客中的热门博文

Does Immigration Promote the Investment of the Monopolistic Firm?

In the present paper, we examine the effect of increasing uncertainty of immigrants’ growth on the optimal timing of investment of a firm that has a monopolistic power over the labor market. It is revealed that when the uncertainty of immigrants’ growth is more than a threshold level, increasing uncertainty of immigrants’ growth accelerates the optimal timing of firms’ investment and enhances the economic growth, even if the uncertainty of immigrants’ growth is formulated by the geometric Brownian motion, which is in sharp contrast to the standard result that an increase in the uncertainty postpones the optimal timing. With an increase in the immigrants over the past ten years, workforces in the host countries have been growing significantly to the extent that the immigrants represent 70% of the increase in the workforce in Europe, and 47% in the United States as OECD indicates. In the present paper, we attempted to investigate the effect of increased uncertainty caused by the growi...

Education Policy Implementation: A Mechanism for Enhancing Primary Education Development in Zanzibar

Education is one of the fundamental rights of individuals; therefore, the government of a country needs to develop and strengthen educational policy and quality as well as to ensure that everyone has equal access to basic education. The improvement of access and quality of education in the world is becoming as an essential factor in development, whereas the basic education (primary school), is acknowledged as a foundation of the higher educational development for every country. To fulfill this goal, governments introduce several policies and procedures; however, it requires some reforms and participation from the politician, policymakers, and other stakeholders to re-examine educational policy so that it can lead to multiplication and betterment of the reforms. Educational reforms actually focus on accountability. A positive educational development and reform is very challenging and needs more effort and strategy on how to use and utilize the resources effectively as such it can achie...