跳至主要内容

Effects of Ion Doping on the Optical Properties of Dye-Sensitized Solar Cells

Read full paper at:
http://www.scirp.org/journal/PaperInformation.aspx?PaperID=50651#.VEh6HVfHRK0

Dye-sensitized solar cells (DSC) play a leading role in the third generation photovoltaics due to their low cost, easy fabrication process, high conversion efficiency and good stability. As a media of dye adsorption, electron transport, and electrolyte diffusion, the nanocrystalline semiconductor photoanode plays a key role during light-to-electricity conversion in DSC. This paper studies the influence of different ions doping and different concentration of ion doping on the electrical and optical properties of DSC, through the photoelectric property test of DSC. We learn that Zn2+ doped TiO2 photoanode is the best. At the same time there was an optimum doping concentration which was 0.05% (mole fraction).
Cite this paper
Gu, D. , Zhu, Y. , Xu, Z. , Wang, N. and Zhang, C. (2014) Effects of Ion Doping on the Optical Properties of Dye-Sensitized Solar Cells. Advances in Materials Physics and Chemistry, 4, 187-193. doi: 10.4236/ampc.2014.410022
 

[1] O’Regn, B. and Gratzel, M. (1991) A Low-Cost High Efficiency Solar Cell Based on Dye-Sensitized Colloidal TiO2 Films. Nature, 353, 737-740.
http://dx.doi.org/10.1038/353737a0
[2] Gratzel, M. (2005) Solar Energy Conversion by Dye-Sensitized Photo-Voltaic Cells. Inorganic Chemistry, 44, 6841-6851.
http://dx.doi.org/10.1021/ic0508371
[3] Gra1tze, M. (2004) Conversion of Sunlight to Electric Power by Nanocrystalline Dye-Sensitized Solar Cells. Journal of Photochemistry and Photobiology A: Chemistry, 164, 3-14.
http://dx.doi.org/10.1016/j.jphotochem.2004.02.023
[4] Gratzel, M. (2003) Dye-Sensitized Solar Cells. Journal of Photochemistry and Photobiology C: Photochemistry Reviews, 4, 145-153.
http://dx.doi.org/10.1016/S1389-5567(03)00026-1
[5] Burschka, J., Pellet, N., Moon, S.-J., et al. (2013) Sequential Deposition as a Route to High-Performance Perovskite-Sensitized Solar Cells. Nature, 499, 316-319.
http://dx.doi.org/10.1038/nature12340
[6] Van De Lagemaat, J. and Frank, A.J. (2001) Nonthermalized Electron Transport in Dye-Sensitized Nanocrystalline TiO2 Films; Transient Photocurrent and Random Walk Modeling Studies. The Journal of Physical Chemistry B, 105, 11194-11205.
http://dx.doi.org/10.1021/jp0118468
[7] Asxhi, R., Morikxwx, T., Ohwxki, T., et al. (2001) Visible-Light Photocatalysis Innitrogen Doped Titanium Oxides. Science, 293, 269-271.
http://dx.doi.org/10.1126/science.1061051
[8] Konstantinova, E.A., Kokorin, A.I., Lips, K., Sakthivel, S. and Kisch, H. (2009) EPR Study of the Illumination Effect on Properties of Paramagnetic Centers in Nitrogen-Doped TiO2 Active in Visible Light Photocatalysis. Applied Magnetic Resonance, 35, 421-427.
http://dx.doi.org/10.1007/s00723-009-0173-5
[9] Menzies, D.B. and Dai, Q. (2007) Modifcation of Mesoporous TiO2 Electrodes by Surface Treatment with Titanium (IV), Indium (III) and Zirconium (IV) Oxideprecursors: Preparation, Characterization and Photovoltaic Performance in Dye-Sensitized Nanocrystalline Solar Cells. Nanotechnology, 18, 125608-125618.
http://dx.doi.org/10.1088/0957-4484/18/12/125608
[10] Zhang, C.N. and Dai, S. (2011) Charge Recombination and Band-Edge Shift in the Dye-Sensitized Mg2+-Doped TiO2 Solar Cells. The Journal of Physical Chemistry C, 115, 16418-16424.
http://dx.doi.org/10.1021/jp2024318
[11] Tian, H.J., Hu, L.H., Zhang, C.N., Liu, W.Q., Huang, Y., Mo, L., Guo, L., Sheng, J. and Dai, S.Y. (2010) Retarded Charge Recombination in Dye-Sensitized Nitrogen-Doped TiO2 Solar Cells. Journal of Physical Chemistry C, 114, 1627-1632.
http://dx.doi.org/10.1021/jp9103646
[12] Du1rr, M., Rosselli, S., Yasuda, A. and Nelles, G. (2006) Band-Gap Engineering of Metal Oxides for Dye-Sensitized Solar Cells. Journal of Physical Chemistry B, 110, 21899-21902.
http://dx.doi.org/10.1021/jp063857c
[13] Ito, S., Murakami, T.N., Comte, P., Liska, P., Gratzel, C., Nazeeruddin, M.K. and Gratzel, M. (2008) Fabrication of Thin Film Dye Sensitized Solar Cells with Solar to Electric Power Conversion Efficiency over 10%. Thin Solid Films, 516, 4613-4619.
http://dx.doi.org/10.1016/j.tsf.2007.05.090
[14] Alias, S.S. and Mohamad, A.A. (2014) Synthesis of Zinc Oxide by Sol-Gel Method for Photoelectrochemical Cells. Springer Briefs in Materials, Springer, Berlin.
[15] Innocenzi, P., Zub, Y.L. and Kessler, V.G. (2008) Sol-Gel Methods for Materials Processing. NATO Science for Peace and Security Series C: Environmental Security.
[16] Hocevar, M., Krasovec, U.O., Berginc, M., Drazic, G., Hauptman, N. and Topic, M. (2008) Development of TiO2 Pastes Modified with Pechini Sol-Gel Method for High Efficiency Dye-Sensitized Solar Cell. Journal of Sol-Gel Science and Technology, 48, 156-162.
[17] Pandey, R.N., Chandra Babu, K.S. and Srivastava, O.N. (1996) High Conversion Efficiency Photoelectrochemical Solar Cells. Progress in Surface Science, 52, 125-192.
http://dx.doi.org/10.1016/0079-6816(96)00009-3           eww141023lx

评论

此博客中的热门博文

A Comparison of Methods Used to Determine the Oleic/Linoleic Acid Ratio in Cultivated Peanut (Arachis hypogaea L.)

Cultivated peanut ( Arachis hypogaea L.) is an important oil and food crop. It is also a cheap source of protein, a good source of essential vitamins and minerals, and a component of many food products. The fatty acid composition of peanuts has become increasingly important with the realization that oleic acid content significantly affects the development of rancidity. And oil content of peanuts significantly affects flavor and shelf-life. Early generation screening of breeding lines for high oleic acid content greatly increases the efficiency of developing new peanut varieties. The objective of this study was to compare the accuracy of methods used to classify individual peanut seed as high oleic or not high oleic. Three hundred and seventy-four (374) seeds, spanning twenty-three (23) genotypes varying in oil composition (i.e. high oleic (H) or normal/not high oleic (NH) inclusive of all four peanut market-types (runner, Spanish, Valencia and Virginia), were individually tested ...

Location Optimization of a Coal Power Plant to Balance Costs against Plant’s Emission Exposure

Fuel and its delivery cost comprise the biggest expense in coal power plant operations. Delivery of electricity from generation to consumers requires investment in power lines and transmission grids. Placing a coal power plant or multiple power plants near dense population centers can lower transmission costs. If a coalmine is nearby, transportation costs can also be reduced. However, emissions from coal plants play a key role in worsening health crises in many countries. And coal upon combustion produces CO 2 , SO 2 , NO x , CO, Metallic and Particle Matter (PM10 & PM2.5). The presence of these chemical compounds in the atmosphere in close vicinity to humans, livestock, and agriculture carries detrimental health consequences. The goal of the research was to develop a methodology to minimize the public’s exposure to harmful emissions from coal power plants while maintaining minimal operational costs related to electric distribution losses and coal logistics. The objective was...

Evaluation of the Safety and Efficacy of Continuous Use of a Home-Use High-Frequency Facial Treatment Appliance

At present, many home-use beauty devices are available in the market. In particular, many products developed for facial treatment use light, e.g., a flash lamp or a light-emitting diode (LED). In this study, the safety of 4 weeks’ continuous use of NEWA TM , a high-frequency facial treatment appliance, every alternate day at home was verified, and its efficacy was evaluated in Japanese individuals with healthy skin aged 30 years or older who complained of sagging of the facial skin.  Transepidermal water loss (TEWL), melanin levels, erythema levels, sebum secretion levels, skin color changes and wrinkle improvement in the facial skin were measured before the appliance began to be used (study baseline), at 2 and 4 weeks after it had begun to be used, and at 2 weeks after completion of the 4-week treatment period (6 weeks from the study baseline). In addition, data obtained by subjective evaluation by the subjects themselves on a visual analog scale (VAS) were also analyzed. Fur...